similar to: gentoo [amd64] - xen sata_promise PATA 20378 not found Neo MSI mobo

I wanted to boot gentoo on xen, but it doesn''t work. What can I do? Booting ''Xen 3.0.0 / Linux 2.6.12.5'' root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /xen.gz dom0_mem=131072 com1=115200,8n1 [Multiboot-elf, <0x100000:0x641cc:0x27e34>, shtab=0x18c078, entry=0x100000] module /vmlinuz-2.6.12.5-xen-0 root=/dev/md0

All. I am running Xen on an ES7000 system with 4 procs and 4 GB memory. I am running Suse Sles-9 (32-bit) on the machine. I have compiled Xen (the tip on the unstable tree : 6552) with PAE enabled (XEN_TARGET_X86_PAE=y). The system boots fine. I started xend and when I tried to bring up a virtual machine, the system gave me the following error on the command line. On the serial port, I saw an

Hi all! After upgrading to Squeeze, I am watching a Xen VMHost that after a while it hangs. This did not happen when I was using Xen with Debian Lenny (in this case as with Squeeze, the Xen components are from Debian repositories). In each case I connected a keyboard and monitor to the computer and the screen remained black without answering any key. This problem seems to also affect domUs,

Originally, the test is on a tiger with RHEL installed. The fs is ext3 as default. Then the oops came up. I've installed the test kernel on another tiger with Suse, reiserfs as default. The kernel can boot successfully without any trouble. Is it a known issue? Or what causes this happen? thanks, -zhen -----Original Message----- From: Wang, Zhenyu Z Sent: 2004?7?20? 16:59 To: linux-ia64 at

Hi, My asterisk server was working with a 4-FXO analog card (TDM400P). I recently added two digital cards: a TE120P (1 PRI) and a B410P (4 BRI). The B410P is still unconfigured but inserted in a PCI slot. The TE120P's jumper is set to E1 as it will connect to a commercial PBX's PRI card also configured as E1. My analog channels used to be 1-4 but since I added the new cards I changed

Hi, I noticed the earlier thread on this started by Scott Koranda (sorry - was reading off gmane so I can''t reply to thread) I have exactly the same symptoms: machine hangs as soon as I attempt to start a single domU, just after emitting "using config file..." At that point the machine appears completely wedged. The sequence of 3 ^A on the console no longer does

Hi, I'm geting this message from virt-manager. Server: SuperMicro X8SIL with INTEL X3440 Here is my logs /var/log/dmesg: Bootdata ok (command line is ro root=/dev/md2) Linux version 2.6.18-194.3.1.el5xen (mockbuild at builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Thu May 13 13:49:53 EDT 2010 BIOS-provided physical RAM map: Xen: 0000000000000000 -

Hi: I?Bought TDM2400P ,with 24 FXO ports , I installed? the asterisk 1.4.28 and?dahdi 2.2.0?and then i compiled them and configured all, i pluged into 8 pstn line into the Rj connector and then i got messages on asterisk console that alarm cleared on channels 1->8??, at this step everything should go fine ,but when i try to make a call?through the TDM?there is silence and no audio,and then i

Package: xen-hypervisor-4.0-amd64 Version: 4.0.1-1 Severity: normal My 32Bit Dom0-crashes with error "Out of SW-IOMMU space for 65536 bytes" after doing moderate I/O on the local storage, which is a software-raid1 over 3 harddrives, connected to the builtin Perc H200 controller with ext3-fs. The error is reproduceable with "dd if=/dev/zero of=bigfile bs=1024 count=1000000"

My kernel crashes every time I shut down dom0 This crash was not happening before I installed the Xen hypervisor Any ideas? (XEN) Xen version 3.2-1 (Debian 3.2.1-2) (waldi at debian.org) (gcc version 4.3.1 (Debian 4.3.1-2) ) Sat Jun 28 09:32:18 UTC 2008 (XEN) Command line: com1=9600,8n1 console=com1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods:

Hi I got a strange error, happening on two of my ext3 partitions. What can be wrong? And why does e2fsck error out, instead of displaying an error message? Best regards keld fsck /dev/hda6 fsck 1.38 (30-Jun-2005) e2fsck 1.38 (30-Jun-2005) Warning... fsck.ext3 for device /dev/hda6 exited with signal 11. also From my dmesg: <1>general protection fault: e7a8 [#3] Modules linked in:

Hi, I have a problem booting the Xen hypervisor on my brand new Lenovo Thinkpad T400 2765D2G (Core2 Duo P8600 CPU, 2.40GHz. 4GB RAM). I''m running Debian 5.0 (Lenny) and I use the Debian-provided xen-hypervisor-3.2-1-amd64 package. The Dom0 kernel seems to be the Xen patches ported to a 2.6.26 kernel: linux-image-2.6.26-1-xen-amd64 I can boot the hypervisor only very unrealiably: Out of

Package: xen-hypervisor-3.2-1-amd64 Version: 3.2.1-2 Severity: important The Xen hypervisor very unreliably boots on my 4GB Lenovo Thinkpad T400 2765D2G. Right after installation it booted the DomO kernel from linux-image-2.6.26-1-xen-amd64 without any problems, but every subsequent restart failed completely. Once I had a XEN "early fatal page fault" error message, on every other of

Hello, every few hours I get the following message in /var/log/message: Jul 5 20:23:28 hXXX kernel: Machine check events logged Jul 5 20:53:28 hXXX kernel: Machine check events logged Jul 5 22:13:28 hXXX kernel: Machine check events logged Jul 5 23:53:28 hXXX kernel: Machine check events logged Jul 5 23:58:27 hXXX kernel: Machine check events logged Jul 6 01:38:27 hXXX kernel: Machine

Hi everyone I have a Digium card TE110P and after plug it, turn on the computer and configure, the LEDs don't light up in spite of what Digium FAQ says about the LEDs: When will the LED's light up on my TDM400P/TE110P/TE2XXP/TE4XXP? ... The TE110P LED's will light up RED when the span is configured and kernel module is loaded. If configured correctly and a circuit or channel bank is

Hi Asterisk Users, We've been experiencing some tough time regarding a new Asterisk installation connected to the PSTN via an ISDN PRI with a Digium TE121 with the optional VPMADT032 echo cancellation module. For now, I'll focus on something very specific which is summarized on this email's subject. However, here are some general facts for the context: - System pbxfri went

Trying to debug a database server getting cpu softlocks causing SSHD to hang and not let anybody log in. Figured that a good first step would be to get some kernel dumps when the problem occurs. According to what I read at the following web site, I can get dumps for softlock problems too. Here's the site: http://blog.kreyolys.com/2011/03/17/no-panic-its-just-a-kernel-panic/ Using a

Mandrake Linux 9.0 here: I installed alsa-utils from CD1 with MCC:Software Install: in /var/log/syslog these error messages appeared (SEE BELOW): "XT3-fs error (device ide0(3,2)): ext3_new_block: Allocating block in system zone - block = 294914" Then I rebooted (because I wanted to boot in runlevel 3 to see whether I could play sound..., not relevant here). Error bootmessages appeared

Hello, yesterday night I had a problem with my server located at a hoster (strato.de). I couldn't ssh to it and over the remote serial console I saw "out of memory" errors (sorry, don't have the text). Then I had reinstall CentOS 5.5/64 bit + all my setup (2h work), because I have a contract with a social network and they will shut down my little card game if it is not

Package: xen-hypervisor-3.4-amd64 and linux-image-2.6.32-5-xen-amd64 Version: 3.4.3-1 and 2.6.32-15 Hello all, GRUB-PC does not automatically populate Xen related parameters in /boot/grub/grub.cfg so I added them manually (see below). All the packages involved on my Dell PowerEdge R710 running Debian GNU/Linux Squeeze AMD64 are from the Squeeze repository. There are four (4) 1TB SATA HDD