similar to: xen2.0 stable periodic machine freeze

Here are the relevant details. all help is greatly appreciated. xenbox linux # uname -a Linux xenbox.localhost 2.6.14-gentoo-r2 #2 Mon Dec 5 16:17:58 Local time zone must be set--see zic manua x86_64 Intel(R) Xeon(TM) CPU 3.00GHzGenuineIntel GNU/Linux xenbox linux # lspci 0000:00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 0c) 0000:00:00.1 Class ff00: Intel Corporation

Hi, I'm trying to install a Junghanns quadbri for a few days but i stay with an asterisk error. (Everyone is busy/congested ) Asterisk is working with a Fritz PCbut from one year and now i want to add the quadbri. The quadbri card has been configured in NT mode and with no 100 ohms S/T termoination. (I'm not sure if the S/T parameter is correct) I have installed the bristuff package

Hello, I have two TE-405Ps that I am having trouble with. I'm using an Intel 865 motherboard with a Celeron D processor. Kernel 2.4.26, Slackware 10.0. my /proc/interrupts: CPU0 0: 172317 XT-PIC timer 1: 2 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 2003 XT-PIC eth0 8: 1 XT-PIC rtc

Hi I have installed CentOS 5 on my computer which has an Intel ICH5 sound chip. The card appears as it should, and I can adjust the volume just fine. However, when I try to play a sound file(.ogg for instance), rhythmbox plays through the file, but no sound is heard. I've tried as root, and I've tried doing cat /dev/urandom > /dev/dsp, and it's all quiet. Output from lspci:

During the last two weeks there has been some discussion in freebsd-questions and freebsd-stable about the prospects of FreeBSD support for some motherboard devices associated with the Intel 865PE/875P and ICH5/ICH5R support chips now showing up in recent motherboard designs. The 865PE/875P chips are called MCH (memory controller hub) or "northbridge" chips. The ICH5/ICH5R chips are

I need to set up the sound card of a server to use in an overhead paging system, as normal I am testing this on my home machine first (which has slightly different Hardware). I'm using chan_alsa with the Intel HD Audio driver on an Intel 82801G (ICH7 Family) sound card. I am running Asterisk 1.4.17 and have a fully loaded TDM400P as a timing source. When calling console/dsp (using

I'm afraid that I am at a loss here. I am new to Asterisk, and have successfully set up SIP. But I cannot get my FXS card working, and I'm not sure what else I can try. # modprobe wcfxo /lib/modules/2.4.21-37.0.1.ELsmp/misc/wcfxo.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may

Hi list! I have an Asterisk server (1.2.14) connected to a E1 line via a TE410P, and some PAP2NA connected to it. The PAP2 DTMF configurations is set to INFO and Asterisk to INFO too. At first, is INFO method different from RFC2833?? Well, I have two problems. The first is that when I place a call to outside, via E1 trunk, sometimes I get some DTMF tones and I'm sure nobody hit any key. Seems

I've submitted a bug on this issue, but I'm hoping to find a workaround that may help resolve the bug or get me to where I want to be - racing this game. Wine 0.9.22-9ubuntu3 (edgy) Installed on Ubuntu - Edgy Eft (2.6.17-10-generic) I did not compile this, installed as a package via Ubuntu's App Manager I don't use Windows with wine Application: NASCAR 2003 (CD Installed version,

I just noticed the 4.9-20030914-PRERELEASE and made a set of installation boot floppies from it to see which of the devices in my new PC the PRERELEASE would support. It wedged hard during the boot autoconfiguration monologue, just after typing these lines on the console: atapci0: <Intel ICH5 ATA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0 ata0:

Hi, I currently encounter spin lock 0xc0c83ba8 (sio) held by 0xc6337460 (tid 100005) too long panic: spin lock held too long cpuid=3 on hp server with two dual-core intel xeon (3.8GHz) and 3GB RAM. System is 7.1-PRELEASE last fetched 29.11.2008, 17:58 UTC. This happens with VSCom Card that was previously in use in a 5.3-STABLE system (also hp server, but older hardware) without problems. The

Graham Bentley wrote: > Recently swapped out my Sony for a HP DAT and > got this first time in dmesg > > (sa0:ahc0:0:6:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 0 0 > (sa0:ahc0:0:6:0): CAM Status: SCSI Status Error > (sa0:ahc0:0:6:0): SCSI Status: Check Condition > (sa0:ahc0:0:6:0): UNIT ATTENTION asc:28,0 > (sa0:ahc0:0:6:0): Not ready to ready change, medium may

Can anyone help me here? ----- Forwarded message from Larry Rosenman <ler at lerctr.org> ----- Date: Sat, 9 Nov 2013 08:46:26 -0600 From: Larry Rosenman <ler at lerctr.org> To: freebsd-stable at freebsd.org Subject: 10-BETA3: Bad negotiation on AHD controller User-Agent: Mutt/1.5.22 (2013-10-16) Ever since I put 10 on this box (source upgrade from 8), I've been getting slow

Does anyone have any experience with Super-Micro brand motherboards // dual Xeon cpu's? Had to swap out my Tyan piece of junk and going back with the S-M board. I believe it has similar north/southbridge chips on it -- at least they are the intel MCH ICH5R and PXH plus the 82546GB. One area that the Tyan board was seriously lacking in was in the hardware monitoring department. The S-M

From sf.net/xen I have obtained xen2.0 and brought xen2.0 stable up on FC2. I am trying to find out a way to obtaining a tar file of xen2.0testing, without bk. I may have overlooked something here, helpful corrections solicited. Thanks in advance. -- Woody Marvel LTC Open Source Projects tel: 503-578-3833/775-3833 email: marvel@us.ibm.com

Hello, I have just installed XEN2.0 on a fresh installation of Fedora Core 3 and iptables does not work properly ===================================================================== [root@aquarius ~]# /etc/init.d/iptables start Applying iptables firewall rules: iptables-restore v1.2.11: iptables-restore: unable to initialize table ''filter'' Error occurred at line: 3 Try

Hello! After upgrade to version 2.0, now using 2.0.1, I'm experiencing problems with glusterfs stability. I'm running 2 node setup with cliet side afr, and glusterfsd also is running on same servers. Time to time glusterfs just hangs, i can reproduce this running iozone benchmarking tool. I'm using patched Fuse, but same result is with unpatched.

I have a workstation with a Gigbyte board and an Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) that's apparently getting bitten by https://bugzilla.redhat.com/show_bug.cgi?id=502499 It's running CentOS 5.4 32 bit, and the user is suffering from high load and sluggish response whenever a disk write of more than a few MB is made. iostat shows the disk at 100%. [root at marge

Hello, I am trying to use a 1.5TB Eonstor raid array with FreeBSD 7.0, but I don't understand whether it is the raid or the scsi card or something else that is causing the computer problems when accessing the raid. My problem is that soon after recognizing the attached disk during boot, FreeBSD appears to hang for about 10 seconds and then says ahd0: Recovery Initiated - Card