similar to: initial cluster setup

Hi, I am trying to configure a two node cluster on SLES10SP2 using user level heartbeat. Here is my configuration. ocfs2-tools-1.4.0-0.3 **user level heartbeat** -> lsmod | grep ocfs ocfs2_user_heartbeat 20992 1 ocfs2_dlmfs 37776 1 ocfs2_dlm 204456 1 ocfs2_dlmfs ocfs2_nodemanager 223384 6 ocfs2_user_heartbeat,ocfs2_dlmfs,ocfs2_dlm configfs 44700 3 ocfs2_user_heartbeat,ocfs2_nodemanager

Hello, I have a DELL MD3000i, and a couple of servers that I want to connect to the array. I have setup the main server with CentOS 5. - 2.6.18-53.el5 x86_64 - ocfs2-tools-1.2.7-1.el5 - ocfs2console-1.2.7-1.el5 - ocfs2-2.6.18-53.el5-1.2.8-2.el5 # Kernel Module And two OpenSuSe 10.3 Servers - 2.6.22.5-31-default x86_64 - ocfs2-tools-1.2.6-18 - ocfs2console-1.2.6-18 The module has been already

Hi everybody, My problem is that I want to add a new node to an existing RAC with ocfs2, without stop the database. If I add a new node to an existing ocfs cluster, do I need to stop the ocfs in the others nodes of the cluster? I've tried to do it without stop the ocfs in the others nodes but I get the following error:

Hi , I am getting the error "No space left on device" on a device with free space which is ocfs2 filesystem. Additional information is as below, [root at sai93 staging]# debugfs.ocfs2 -n -R "stats" /dev/sdb1 | grep -i "Cluster Size" Block Size Bits: 12 Cluster Size Bits: 15 [root at sai93 ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release

hello, I'm running Ubuntu Breezy with the OCFS2 modules in the standard kernel. I installed ocfs2console and ocfs2-tools I've formatted a partition with ocfs2. But I can't add any node or mount the device(with the ocfs2console). because I get a "Unable to access cluster service" I can't find the cause nor the solution to this. root@lenaeja:~# /etc/init.d/o2cb status

I have installed OCFS2 on two nodes SuSE 10. Seems all works superb and nice from the first sight. But, /dev/sda ocfs2 rac1 is not sharing through net (port 7777) with rac0. On both nodes I have 500Mb /dev/sda disks that are mounted (and are ocfs2). But they did not share the content with each other (files and folders in it). So when I am creating the file in one node I am expecting to

Hi, I was interested in a simple configuration with 2 machines sharing a drbd drive in primary-primary mode. I am done with drbdb, but I am a newbie to ocfs, so wanted some help. I have 2 machines, with centos5.2 , kernel 2.6.18-8.el5. I downloaded the following packages : ocfs2-2.6.18-92.el5-1.4.1-1.el5.x86_64.rpm ocfs2-tools-1.4.1-1.el5.x86_64.rpm ocfs2console-1.4.1-1.el5.x86_64.rpm (download

Dear List, I''m thinking about using xen productive in our datacenter, i''m still testing around with it. Now I got some questions, just for basic understanding, we got for example this environment: 2 Nodes 1 SCSI Pool server (Connected via scsi to both nodes) Now I want to build a "cluster" so i would like to make this: Node 1 -> Primary -| | --> domU

I looked around, found older post which seems not applicable anymore. I have a cluster of 2 nodes right now, which has 3 OCFS2 file systems. All the file systems were formatted with 4 node slots. I added the two news nodes (by hand, by ocfs2console and o2cb_ctl), so my /etc/ofcfs/cluster.conf looks right: node: ip_port = 7777 ip_address = 192.168.201.1 number = 0

Hi to all, this is My first time on this mailinglist. I have a problem with Ocfs2 on Debian etch 4.0 I'd like when a node go down or freeze without unmount the ocfs2 partition the heartbeat not fence the server that work well ( kernel panic ). I'd like disable or heartbeat or fencing. So we can work also with only 1 node. Thanks

Hi, I want to share a partition of an external disk between 3 machines. It is located on a Sun StoreTek 3510 and bound (via multipathing) to all 3 machines. One machine (say mach1) is the node I used to create the filesystem and setup /etc/ocfs2/cluster.conf. I copied the file to the other 2 machines. All use the same /etc/multipath.conf[1], too. All start /etc/init.d/ocfs2 at boot, all are

Hi, I'm new to this list and to the ocfs2 system and to clustering in general (3 strikes?--ack!). I have some problems with my first attempt at configuring an ocfs2 system and need some perspective. My setup is a Compaq Proliant CL380 2 node cluster with a shared storage array. Both nodes are currently running SLES 10. However, I am just trying to get one node working. I have read the

I people, i install the ocfs in my virtual machine, with centos 5.3 and xen. But when i turn off the machine1, the ocfs start the fencing off the machine2. I read the doc in oracle.com, but could not solve the problem. Someone help? My conf and my package version. cluster.conf node: ip_port = 7777 ip_address = 192.168.1.35 number = 0 name = x1 cluster

All, We are having some problems getting OCFS2 to run, we are using kernel 2.6.15 with OCFS2 1.2.1. Compiling the OCFS2 sources went fine and all modules load perfectly. However, we can only mount the OCFS2 volume on one machine at a time, when we try to mount the volume on the 2 other machines we get an error stating that another node is heartbeating in our slot. When we mount the volume

Does anyone have any idea what to try next? Here are the steps I have taken and the problem: (I wanted to post my question on the first line before I explained the problem and what I have tried) ---------- Node 0 has the file system mounted just fine and works great. When trying to mount on Node 1: `mount.ocfs2 /dev/mapper/data /cluster/ data` I get this error after about 30 seconds:

Hello, I have an active, balanced webcluster with 2 SLES10SP2 nodes, both running ocfs2 with an iscsi target. The ocfs2 volume is mounted on both nodes. Everything works fine, except sometime the load on both systems go as high as 200, then both systems freeze, only reboot helps to regain control. I noticed that this behaviour does not occur when the cluster is NOT balanced. When the load on both

Hi, I was looking for why one of the nodes could not mount OCFS again, then I found this path: /sys/kernel/config/cluster/r0/node/ Which I have folders related to my servers, then I noticed that node1 (which is working with OCFS2) did not update node2 IP address. The file I am talking about is: /sys/kernel/config/cluster/r0/node/raid2/ipv4_address Example: root at

An HTML attachment was scrubbed... URL: http://oss.oracle.com/pipermail/ocfs2-users/attachments/20110303/0fbefee6/attachment.html

I currenlty have the setup below, both nodes can see the shared drive ( confirmed with fdisk -l ) However I am unable to mount the shared device from node (2) after I mounted from node(1) I get the follwoign error mount.ocfs2: Transport endpoint is not connected while mounting /dev/sdb1 on /u02/oradata/orcl OS Red Hat uname -r --------------------------------- 2.6.9-22.ELsmp OCFS version

Hi, We are haing some serious issues trying to configure an OCFS2 cluster on 3 SLES 10 SP2 boxes running in VMware ESX 3.0.1. Before I go into any of the detailed errors we are experiencing I first wanted to ask everyone if they have successfully configured this solution? We would be interested to find out what needs to be set at the VMware level (RDM, VMFS, NICS etc) and what needs to be