similar to: Unable to access cluster service

I'm using ocfs2 and all modules from Suse (SLES9), no self compilations. Here are the details: * 32-bit machine (writing to ocfs2 partition/LUN and where the corruption was reported): Kernel: 2.6.5-7.257-bigsmp #1 SMP i686 i386 GNU/Linux OCFS2 rpms: ocfs2console-1.2.1-4.2 ocfs2-tools-1.2.1-4.2 o2cb_ctl -V: o2cb_ctl version 1.2.1 /etc/init.d/o2cb status: Module "configfs":

Hello, I have a DELL MD3000i, and a couple of servers that I want to connect to the array. I have setup the main server with CentOS 5. - 2.6.18-53.el5 x86_64 - ocfs2-tools-1.2.7-1.el5 - ocfs2console-1.2.7-1.el5 - ocfs2-2.6.18-53.el5-1.2.8-2.el5 # Kernel Module And two OpenSuSe 10.3 Servers - 2.6.22.5-31-default x86_64 - ocfs2-tools-1.2.6-18 - ocfs2console-1.2.6-18 The module has been already

When attempting to mount the OCFS2 file system I'm getting the following error message: ocfs2_hb_ctl: Internal logic failure while starting heartbeat mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted" I followed the steps given in the users_guide: modprobe ocfs2_dlmfs mount -t configfs none /config mount -t ocfs2_dlmfs none /dlm o2cb_ctl

Hi everybody, My problem is that I want to add a new node to an existing RAC with ocfs2, without stop the database. If I add a new node to an existing ocfs cluster, do I need to stop the ocfs in the others nodes of the cluster? I've tried to do it without stop the ocfs in the others nodes but I get the following error:

Hi, I am trying to configure a two node cluster on SLES10SP2 using user level heartbeat. Here is my configuration. ocfs2-tools-1.4.0-0.3 **user level heartbeat** -> lsmod | grep ocfs ocfs2_user_heartbeat 20992 1 ocfs2_dlmfs 37776 1 ocfs2_dlm 204456 1 ocfs2_dlmfs ocfs2_nodemanager 223384 6 ocfs2_user_heartbeat,ocfs2_dlmfs,ocfs2_dlm configfs 44700 3 ocfs2_user_heartbeat,ocfs2_nodemanager

Hallo, I have two servers and both are connected to external array, each by own SAS connection. I need these servers to work simultaneously with data on array and I think that ocfs2 is suitable for this purpose. One server is P4 Xeon (Gentoo linux, i386, 2.6.22-r2) and second is Opteron (Gentoo linux, x86_64, 2.6.22-r2). Servers are connected by ethernet, adapters are both Intel

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi everyone, another problem I did not find a solution for... I ran "o2cb configure" and configured a cluster named "ocfs2". Lazy me, I did not invent a new name. Now this cluster must be renamed to avoid confusion, the name has to change to "sapcluster". I changed /etc/ocfs2/cluster.conf to the new name and ran

Hi, I've tried to run ocfs2 on debian stable (sarge). Have patched and compiled a new kernel-package using vanilla 2.6.14 sources. No compiler errors, all modules for ocfs2 builded. Installed the Debian packages ocfs2-tools_1.0.0-1_i386.deb and ocfs2console_1.0.0-1_i386.deb without any problems. But now I can't initialize the cluster, whether through ocfs2console or with

We're trying to setup 3 PRDM partitions (VMware) across 2 nodes. As long as only one is configured in cluster.conf, there's not problem. As soon as we try to use 2 or more we get issues. It looks the same as bug 636: http://oss.oracle.com/bugzilla/show_bug.cgi?id=636 I posted my cluster.conf and command line results there. I'm including them here in the hopes that someone on this

Hi. I'm pretty new to ocfs2 and clusters. I'm trying to make ocfs2 running over a drbd device. I know it's not the best solution but for now i must deal with this. I set up drbd and work perfectly. I set up ocfs and i'm not able to make it to work. /etc/init.d/o2cb status: Module "configfs": Loaded Filesystem "configfs": Mounted Module

Hi, I'm trying to compile ocfs2 1.2.6 on a 2.6.21 kernel (with rsbac and pax patches), but I can't get this to work .. In 2.6.20 there was an change in the definition of the INIT_WORK macro (http://lkml.org/lkml/2006/12/5/269) this seems to cause my problems (see below) but even after removing the third parameter of the INIT_WORK calls the compile fails (see second compile failure). Can

RHEL 4 (CENT OS) Am I waisting my time trying to get the 10G Clusterware installer to use OCFS2 volumes for the voting and OCR disks ? The ocfs2 setup seems happy on both nodes but the 10G installer says the location entered for the oracle cluster registry (OCR) is not shared across all the nodes in the cluster Do the volumes need to mounted ? I did with no change . [root@green rc5.d]#

Seems RPM compatibility issue with OS Kernel. Check OS Kernel and download RPM (4 Nos) for same kernel. Regards, Yuvrajsinh Chauhan || Sr. DBA || CRESTEL-PSG Elitecore Technologies Pvt. Ltd. 904, Silicon Tower || Off C.G.Road Behind Pariseema Building || Ahmedabad || INDIA [GSM]: +91 9727746022 -----Original Message----- From: ocfs2-users-bounces at oss.oracle.com [mailto:ocfs2-users-bounces

I currenlty have the setup below, both nodes can see the shared drive ( confirmed with fdisk -l ) However I am unable to mount the shared device from node (2) after I mounted from node(1) I get the follwoign error mount.ocfs2: Transport endpoint is not connected while mounting /dev/sdb1 on /u02/oradata/orcl OS Red Hat uname -r --------------------------------- 2.6.9-22.ELsmp OCFS version

Hi Yuvrajsinh, thank you for the reply, yes it was a kernel issue and we have done an upgrade to 2.6.18.308 and used the packges that match the version number, and I have done a update post this evening as below Hi All, since the post I have made some kind of a progress 1. I upgraded the kernel to 2.6.18-308.1.1.el5 same I was able to download the ocfs2 module is

I've got a fresh RHEL AS 4-U2 installation on a Dell PE2850 server. I downloaded and installed the latest RPMs: ocfs2-2.6.9-22.ELsmp-1.0.7-1.i686.rpm ocfs2-tools-1.0.2-1.i386.rpm ocfs2console-1.0.2-1.i386.rpm I was able to start the console, but when I try to run cluster->configure_nodes, I get the following error message: Could not start cluster stack. This must be resolved before any

One more follow on, The combination of kernel.panic=60 and kernel.printk=7 4 1 7 seems to have netted the culrptit: E01-netconsole.log:Jan 18 09:45:10 E01 (10,0):o2hb_write_timeout:137 ERROR: Heartbeat write timeout to device dm-12 after 60000 milliseconds E01-netconsole.log:Jan 18 09:45:10 E01 (10,0):o2hb_stop_all_regions:1517 ERROR: stopping heartbeat on all active regions.

Hi, I'm new to this list and to the ocfs2 system and to clustering in general (3 strikes?--ack!). I have some problems with my first attempt at configuring an ocfs2 system and need some perspective. My setup is a Compaq Proliant CL380 2 node cluster with a shared storage array. Both nodes are currently running SLES 10. However, I am just trying to get one node working. I have read the

Hi! Seems we're facing some memory leak here. This is vanilla 2.6.19-rc6 on a x86_64 box, 4GB RAM. A simple `ls -Rn' on a filesystem with lots of files makes the box leak so much RAM that the OOM killer starts to kick in. With slab alloc debugging turned on, we see this: # mount; ls -Rn; wait some seconds; Ctrl-C [root@lnxp-1038:/backend1]$ cat /proc/slab_allocators | egrep

more messages in the other node of the cluster.../var/log/messages. ======== Jun 1 19:05:59 linux2 kernel: cdrom: open failed. Jun 1 19:05:59 linux2 kernel: cdrom: open failed. Jun 1 19:09:35 linux2 kernel: OCFS2 Node Manager 0.99.10-BETA14 Tue May 31 23:34:42 EDT 2005 (build 82257c19fee200eff2ba31569613b46a) Jun 1 19:09:35 linux2 kernel: OCFS2 DLM 0.99.10-BETA14 Tue May 31 23:34:43 EDT 2005