similar to: ocfs2 <-> 10G (10.2.01) Clusterware

Hi, I am trying to configure a two node cluster on SLES10SP2 using user level heartbeat. Here is my configuration. ocfs2-tools-1.4.0-0.3 **user level heartbeat** -> lsmod | grep ocfs ocfs2_user_heartbeat 20992 1 ocfs2_dlmfs 37776 1 ocfs2_dlm 204456 1 ocfs2_dlmfs ocfs2_nodemanager 223384 6 ocfs2_user_heartbeat,ocfs2_dlmfs,ocfs2_dlm configfs 44700 3 ocfs2_user_heartbeat,ocfs2_nodemanager

hello, I'm running Ubuntu Breezy with the OCFS2 modules in the standard kernel. I installed ocfs2console and ocfs2-tools I've formatted a partition with ocfs2. But I can't add any node or mount the device(with the ocfs2console). because I get a "Unable to access cluster service" I can't find the cause nor the solution to this. root@lenaeja:~# /etc/init.d/o2cb status

Hello, I have a DELL MD3000i, and a couple of servers that I want to connect to the array. I have setup the main server with CentOS 5. - 2.6.18-53.el5 x86_64 - ocfs2-tools-1.2.7-1.el5 - ocfs2console-1.2.7-1.el5 - ocfs2-2.6.18-53.el5-1.2.8-2.el5 # Kernel Module And two OpenSuSe 10.3 Servers - 2.6.22.5-31-default x86_64 - ocfs2-tools-1.2.6-18 - ocfs2console-1.2.6-18 The module has been already

I'm using ocfs2 and all modules from Suse (SLES9), no self compilations. Here are the details: * 32-bit machine (writing to ocfs2 partition/LUN and where the corruption was reported): Kernel: 2.6.5-7.257-bigsmp #1 SMP i686 i386 GNU/Linux OCFS2 rpms: ocfs2console-1.2.1-4.2 ocfs2-tools-1.2.1-4.2 o2cb_ctl -V: o2cb_ctl version 1.2.1 /etc/init.d/o2cb status: Module "configfs":

Hallo, I have two servers and both are connected to external array, each by own SAS connection. I need these servers to work simultaneously with data on array and I think that ocfs2 is suitable for this purpose. One server is P4 Xeon (Gentoo linux, i386, 2.6.22-r2) and second is Opteron (Gentoo linux, x86_64, 2.6.22-r2). Servers are connected by ethernet, adapters are both Intel

Hi there I recently installed an OCFS2 filesystem on our FC-SAN. Everything seemed to work fine and I could read & write the filesystem from both servers that are mounting it. After a while though, writes coming from one node do not appear on the other node and vice versa. I am not sure what's causing this, and not very experienced at debugging filesystems. If anybody has any

I've got a fresh RHEL AS 4-U2 installation on a Dell PE2850 server. I downloaded and installed the latest RPMs: ocfs2-2.6.9-22.ELsmp-1.0.7-1.i686.rpm ocfs2-tools-1.0.2-1.i386.rpm ocfs2console-1.0.2-1.i386.rpm I was able to start the console, but when I try to run cluster->configure_nodes, I get the following error message: Could not start cluster stack. This must be resolved before any

Hi team I had installed OCFS2 on RHEL5.0 . every thing looks fine but when I was installing CRS on the node I got error message OCFS2 is not supported. Can you please put some light on this. Please find other info below [root at eregtest1 client]# uname -a Linux eregtest1.admin.abdn.ac.uk 2.6.18-92.el5 #1 SMP Tue Apr 29 13:16:15 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux i am using RHEL 5.0

more messages in the other node of the cluster.../var/log/messages. ======== Jun 1 19:05:59 linux2 kernel: cdrom: open failed. Jun 1 19:05:59 linux2 kernel: cdrom: open failed. Jun 1 19:09:35 linux2 kernel: OCFS2 Node Manager 0.99.10-BETA14 Tue May 31 23:34:42 EDT 2005 (build 82257c19fee200eff2ba31569613b46a) Jun 1 19:09:35 linux2 kernel: OCFS2 DLM 0.99.10-BETA14 Tue May 31 23:34:43 EDT 2005

more messages in the other node of the cluster.../var/log/messages. ======== Jun 1 19:05:59 linux2 kernel: cdrom: open failed. Jun 1 19:05:59 linux2 kernel: cdrom: open failed. Jun 1 19:09:35 linux2 kernel: OCFS2 Node Manager 0.99.10-BETA14 Tue May 31 23:34:42 EDT 2005 (build 82257c19fee200eff2ba31569613b46a) Jun 1 19:09:35 linux2 kernel: OCFS2 DLM 0.99.10-BETA14 Tue May 31 23:34:43 EDT 2005

I currenlty have the setup below, both nodes can see the shared drive ( confirmed with fdisk -l ) However I am unable to mount the shared device from node (2) after I mounted from node(1) I get the follwoign error mount.ocfs2: Transport endpoint is not connected while mounting /dev/sdb1 on /u02/oradata/orcl OS Red Hat uname -r --------------------------------- 2.6.9-22.ELsmp OCFS version

One more follow on, The combination of kernel.panic=60 and kernel.printk=7 4 1 7 seems to have netted the culrptit: E01-netconsole.log:Jan 18 09:45:10 E01 (10,0):o2hb_write_timeout:137 ERROR: Heartbeat write timeout to device dm-12 after 60000 milliseconds E01-netconsole.log:Jan 18 09:45:10 E01 (10,0):o2hb_stop_all_regions:1517 ERROR: stopping heartbeat on all active regions.

I have installed OCFS2 on two nodes SuSE 10. Seems all works superb and nice from the first sight. But, /dev/sda ocfs2 rac1 is not sharing through net (port 7777) with rac0. On both nodes I have 500Mb /dev/sda disks that are mounted (and are ocfs2). But they did not share the content with each other (files and folders in it). So when I am creating the file in one node I am expecting to

When attempting to mount the OCFS2 file system I'm getting the following error message: ocfs2_hb_ctl: Internal logic failure while starting heartbeat mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted" I followed the steps given in the users_guide: modprobe ocfs2_dlmfs mount -t configfs none /config mount -t ocfs2_dlmfs none /dlm o2cb_ctl

Hi, I'm new to this list and to the ocfs2 system and to clustering in general (3 strikes?--ack!). I have some problems with my first attempt at configuring an ocfs2 system and need some perspective. My setup is a Compaq Proliant CL380 2 node cluster with a shared storage array. Both nodes are currently running SLES 10. However, I am just trying to get one node working. I have read the

Hi, I have installed and configured ocfs2 as per the given guidelines on two nodes. The output of the service status of o2cb and ocfs2 is as under: Node: rashida1 -------------------------------------------------- [root at rashida1 ~]# service o2cb status Driver for "configfs": Loaded Filesystem "configfs": Mounted Driver for "ocfs2_dlmfs": Loaded Filesystem

Hi I have: SLES 10 SP2 (2.6.16.60-0.21-smp) ocfs2-tools-1.4.0-0.3 ocfs2console-1.4.0-0.3 and I can't change "heartbeat dead threshold" value. Content of /etc/sysconfig/o2cb: # O2CB_ENABLED: 'true' means to load the driver on boot. O2CB_ENABLED=true # O2CB_BOOTCLUSTER: If not empty, the name of a cluster to start. O2CB_BOOTCLUSTER=ocfs2 # O2CB_HEARTBEAT_THRESHOLD:

Hi everybody, My problem is that I want to add a new node to an existing RAC with ocfs2, without stop the database. If I add a new node to an existing ocfs cluster, do I need to stop the ocfs in the others nodes of the cluster? I've tried to do it without stop the ocfs in the others nodes but I get the following error:

Hi, Sunil or Tao, I have a 4 nodes OCFS2 cluster running OCFS2 1.2.8 on SuSE 9 SP4. When I tried to do failover testing (shutting down one node), the whole cluster hung (I can not even login to any server in the cluster). I have to bring all of them up and then be able to use the system. What kind of behavior is it? Is it the fence of OCFS2? Below is my configuration. aopcer13:~ #

Hello, How to mount a disk with ocfs2 FS in one node to another . Let ys say I have /dev/sda mounted on /u01 in node 1 . I need to access it from nod2 . Any solutions ? I am using ubuntu 8.10 Node 1 ====== root at 110:~# /etc/init.d/o2cb status Module "configfs": Loaded Filesystem "configfs": Mounted Module "ocfs2_nodemanager": Loaded Module