similar to: [PATCH] fix up sles9 spec file

Hallo, I have two servers and both are connected to external array, each by own SAS connection. I need these servers to work simultaneously with data on array and I think that ocfs2 is suitable for this purpose. One server is P4 Xeon (Gentoo linux, i386, 2.6.22-r2) and second is Opteron (Gentoo linux, x86_64, 2.6.22-r2). Servers are connected by ethernet, adapters are both Intel

I'm using ocfs2 and all modules from Suse (SLES9), no self compilations. Here are the details: * 32-bit machine (writing to ocfs2 partition/LUN and where the corruption was reported): Kernel: 2.6.5-7.257-bigsmp #1 SMP i686 i386 GNU/Linux OCFS2 rpms: ocfs2console-1.2.1-4.2 ocfs2-tools-1.2.1-4.2 o2cb_ctl -V: o2cb_ctl version 1.2.1 /etc/init.d/o2cb status: Module "configfs":

Hi, I've tried to run ocfs2 on debian stable (sarge). Have patched and compiled a new kernel-package using vanilla 2.6.14 sources. No compiler errors, all modules for ocfs2 builded. Installed the Debian packages ocfs2-tools_1.0.0-1_i386.deb and ocfs2console_1.0.0-1_i386.deb without any problems. But now I can't initialize the cluster, whether through ocfs2console or with

hello, I'm running Ubuntu Breezy with the OCFS2 modules in the standard kernel. I installed ocfs2console and ocfs2-tools I've formatted a partition with ocfs2. But I can't add any node or mount the device(with the ocfs2console). because I get a "Unable to access cluster service" I can't find the cause nor the solution to this. root@lenaeja:~# /etc/init.d/o2cb status

Hi, I am trying to configure a two node cluster on SLES10SP2 using user level heartbeat. Here is my configuration. ocfs2-tools-1.4.0-0.3 **user level heartbeat** -> lsmod | grep ocfs ocfs2_user_heartbeat 20992 1 ocfs2_dlmfs 37776 1 ocfs2_dlm 204456 1 ocfs2_dlmfs ocfs2_nodemanager 223384 6 ocfs2_user_heartbeat,ocfs2_dlmfs,ocfs2_dlm configfs 44700 3 ocfs2_user_heartbeat,ocfs2_nodemanager

One more follow on, The combination of kernel.panic=60 and kernel.printk=7 4 1 7 seems to have netted the culrptit: E01-netconsole.log:Jan 18 09:45:10 E01 (10,0):o2hb_write_timeout:137 ERROR: Heartbeat write timeout to device dm-12 after 60000 milliseconds E01-netconsole.log:Jan 18 09:45:10 E01 (10,0):o2hb_stop_all_regions:1517 ERROR: stopping heartbeat on all active regions.

Hello, I have a DELL MD3000i, and a couple of servers that I want to connect to the array. I have setup the main server with CentOS 5. - 2.6.18-53.el5 x86_64 - ocfs2-tools-1.2.7-1.el5 - ocfs2console-1.2.7-1.el5 - ocfs2-2.6.18-53.el5-1.2.8-2.el5 # Kernel Module And two OpenSuSe 10.3 Servers - 2.6.22.5-31-default x86_64 - ocfs2-tools-1.2.6-18 - ocfs2console-1.2.6-18 The module has been already

This node rebooted due to a kernel panic and we are not able to mount the ocfs2 filesystems after that. Please help [root at guard0 ~]# /etc/init.d/o2cb online Loading module "configfs": OK Mounting configfs filesystem at /sys/kernel/config: OK Loading module "ocfs2_nodemanager": OK Loading module "ocfs2_dlm": OK Loading module "ocfs2_dlmfs": OK Mounting

I currenlty have the setup below, both nodes can see the shared drive ( confirmed with fdisk -l ) However I am unable to mount the shared device from node (2) after I mounted from node(1) I get the follwoign error mount.ocfs2: Transport endpoint is not connected while mounting /dev/sdb1 on /u02/oradata/orcl OS Red Hat uname -r --------------------------------- 2.6.9-22.ELsmp OCFS version

I have installed OCFS2 on two nodes SuSE 10. Seems all works superb and nice from the first sight. But, /dev/sda ocfs2 rac1 is not sharing through net (port 7777) with rac0. On both nodes I have 500Mb /dev/sda disks that are mounted (and are ocfs2). But they did not share the content with each other (files and folders in it). So when I am creating the file in one node I am expecting to

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi everyone, another problem I did not find a solution for... I ran "o2cb configure" and configured a cluster named "ocfs2". Lazy me, I did not invent a new name. Now this cluster must be renamed to avoid confusion, the name has to change to "sapcluster". I changed /etc/ocfs2/cluster.conf to the new name and ran

Hi, Sunil or Tao, I have a 4 nodes OCFS2 cluster running OCFS2 1.2.8 on SuSE 9 SP4. When I tried to do failover testing (shutting down one node), the whole cluster hung (I can not even login to any server in the cluster). I have to bring all of them up and then be able to use the system. What kind of behavior is it? Is it the fence of OCFS2? Below is my configuration. aopcer13:~ #

Hello, How to mount a disk with ocfs2 FS in one node to another . Let ys say I have /dev/sda mounted on /u01 in node 1 . I need to access it from nod2 . Any solutions ? I am using ubuntu 8.10 Node 1 ====== root at 110:~# /etc/init.d/o2cb status Module "configfs": Loaded Filesystem "configfs": Mounted Module "ocfs2_nodemanager": Loaded Module

RHEL 4 (CENT OS) Am I waisting my time trying to get the 10G Clusterware installer to use OCFS2 volumes for the voting and OCR disks ? The ocfs2 setup seems happy on both nodes but the 10G installer says the location entered for the oracle cluster registry (OCR) is not shared across all the nodes in the cluster Do the volumes need to mounted ? I did with no change . [root@green rc5.d]#

I'm having some problems with ocfs2 and Suse 9.2. The documentation for ocfs2 says it comes with Suse 9.2. I've installed Suse and used YAST to get to SP2. # SPident -vv Summary (using 612 packages) Product/ServicePack conflict match update (shipped) SLES-9-x86_64 0 0% 293 47.9% 44 (1597 18.3%) SLES-9-x86_64-SP1 0 0% 110

Hello, we have a bug on any xen kernel > 3.4 like this: kernel BUG at /home/abuild/rpmbuild/BUILD/kernel- xen-3.7.9/linux-3.7/fs/buffer.c:2952! [ 628.054552] invalid opcode: 0000 [#1] SMP [ 628.054557] Modules linked in: bridge stp llc iptable_filter ip_tables x_tables nbd blktap2 pciback usbbk xen_scsibk openvswitch blkbk blkback_pagemap netbk xenbus_be gntdev evtchn ocfs2_dlmfs

I've got a fresh RHEL AS 4-U2 installation on a Dell PE2850 server. I downloaded and installed the latest RPMs: ocfs2-2.6.9-22.ELsmp-1.0.7-1.i686.rpm ocfs2-tools-1.0.2-1.i386.rpm ocfs2console-1.0.2-1.i386.rpm I was able to start the console, but when I try to run cluster->configure_nodes, I get the following error message: Could not start cluster stack. This must be resolved before any

more messages in the other node of the cluster.../var/log/messages. ======== Jun 1 19:05:59 linux2 kernel: cdrom: open failed. Jun 1 19:05:59 linux2 kernel: cdrom: open failed. Jun 1 19:09:35 linux2 kernel: OCFS2 Node Manager 0.99.10-BETA14 Tue May 31 23:34:42 EDT 2005 (build 82257c19fee200eff2ba31569613b46a) Jun 1 19:09:35 linux2 kernel: OCFS2 DLM 0.99.10-BETA14 Tue May 31 23:34:43 EDT 2005

more messages in the other node of the cluster.../var/log/messages. ======== Jun 1 19:05:59 linux2 kernel: cdrom: open failed. Jun 1 19:05:59 linux2 kernel: cdrom: open failed. Jun 1 19:09:35 linux2 kernel: OCFS2 Node Manager 0.99.10-BETA14 Tue May 31 23:34:42 EDT 2005 (build 82257c19fee200eff2ba31569613b46a) Jun 1 19:09:35 linux2 kernel: OCFS2 DLM 0.99.10-BETA14 Tue May 31 23:34:43 EDT 2005

Hi, I'm new to this list and to the ocfs2 system and to clustering in general (3 strikes?--ack!). I have some problems with my first attempt at configuring an ocfs2 system and need some perspective. My setup is a Compaq Proliant CL380 2 node cluster with a shared storage array. Both nodes are currently running SLES 10. However, I am just trying to get one node working. I have read the