similar to: OCFS2 Supported Platforms

I also sent this to OCFS2-devel but no response so far. So... I noticed that OCFS2 got updated in the last few days. I just tried to do a build and got this: [root@linuxjohn2 trunk]# make make -C src make[1]: Entering directory `/root/ocfs2/trunk/src' make[1]: *** No rule to make target `inc/io.h', needed by `alloc.c'. Stop. make[1]: Leaving directory `/root/ocfs2/trunk/src'

Hi All, Is there any one know if OCFS2 will be certified on RedHat AS3 or 2.1? On http://oss.oracle.com I see OCFS2 Beta is available for RHAS 4 only. Rgds, Huy. == Nguyen Quang Huy Sr. Technical Sales Consultant Oracle Vietnam 53 Quang Trung St, Hanoi Email: quang.huy.nguyen@oracle.com Phone: +84 4 943 2595 Fax: +84 4 943 2592 == -----Original Message----- From:

Hi Yuvrajsinh, thank you for the reply, yes it was a kernel issue and we have done an upgrade to 2.6.18.308 and used the packges that match the version number, and I have done a update post this evening as below Hi All, since the post I have made some kind of a progress 1. I upgraded the kernel to 2.6.18-308.1.1.el5 same I was able to download the ocfs2 module is

Seems RPM compatibility issue with OS Kernel. Check OS Kernel and download RPM (4 Nos) for same kernel. Regards, Yuvrajsinh Chauhan || Sr. DBA || CRESTEL-PSG Elitecore Technologies Pvt. Ltd. 904, Silicon Tower || Off C.G.Road Behind Pariseema Building || Ahmedabad || INDIA [GSM]: +91 9727746022 -----Original Message----- From: ocfs2-users-bounces at oss.oracle.com [mailto:ocfs2-users-bounces

I have installed OCFS2 on two nodes SuSE 10. Seems all works superb and nice from the first sight. But, /dev/sda ocfs2 rac1 is not sharing through net (port 7777) with rac0. On both nodes I have 500Mb /dev/sda disks that are mounted (and are ocfs2). But they did not share the content with each other (files and folders in it). So when I am creating the file in one node I am expecting to

Hi, I was interested in a simple configuration with 2 machines sharing a drbd drive in primary-primary mode. I am done with drbdb, but I am a newbie to ocfs, so wanted some help. I have 2 machines, with centos5.2 , kernel 2.6.18-8.el5. I downloaded the following packages : ocfs2-2.6.18-92.el5-1.4.1-1.el5.x86_64.rpm ocfs2-tools-1.4.1-1.el5.x86_64.rpm ocfs2console-1.4.1-1.el5.x86_64.rpm (download

Hi all, We just finished up the last of the work to change the on-disk format of ocfs2 and we are about to move this from the branch into trunk in svn. We tried very hard to make every conceivable change that we would want in this last pass so that this would be the final on-disk change. What this means for any of you who are tracking this project is that you will need to reformat before picking

I also sent this to OCFS2-devel but no response so far. So... I noticed that OCFS2 got updated in the last few days. I just tried to do a build and got this: [root@linuxjohn2 trunk]# make make -C src make[1]: Entering directory `/root/ocfs2/trunk/src' make[1]: *** No rule to make target `inc/io.h', needed by `alloc.c'. Stop. make[1]: Leaving directory `/root/ocfs2/trunk/src'

This is the test result on 2.4.20 kernel, it is much like the result on 2.6.3 kernel. Both hang on rmdir03. Anther result is when on a SMP kernel of 2.4.20 on UP machine, the test crashs on "create" test. > -----Original Message----- > From: ocfs2-devel-bounces@oss.oracle.com > [mailto:ocfs2-devel-bounces@oss.oracle.com] On Behalf Of > Ling, Xiaofeng > Sent:

Hi I'd like to know if OCFS2 1.4 on RHEL5 with the REDHAT latest kernel supports disk quotas, the xattr and acl. I could have done something wrong but only the acl seem to work. Apparently instead on FC12, where support is enabled in the kernel itself OCFS grep / boot / config * CONFIG_OCFS2_FS = m CONFIG_OCFS2_FS_O2CB = m CONFIG_OCFS2_FS_USERSPACE_CLUSTER = m # CONFIG_OCFS2_FS_STATS is

Hi, On 12/05/2017 11:19 PM, BASSAGET C?dric wrote: > Hello > Retried from scratch; and still have an error when trying to bring up > the second cluster : > > root at LAB-virtm6:/# o2cb register-cluster ocfs2new > o2cb: Internal logic failure while registering cluster 'ocfs2new' > > root at LAB-virtm6:/mnt/vol1_iscsi_san1# o2cb list-clusters > ocfs2 >

Hi, On 12/05/2017 11:19 PM, BASSAGET C?dric wrote: > Hello > Retried from scratch; and still have an error when trying to bring up > the second cluster : > > root at LAB-virtm6:/# o2cb register-cluster ocfs2new > o2cb: Internal logic failure while registering cluster 'ocfs2new' > > root at LAB-virtm6:/mnt/vol1_iscsi_san1# o2cb list-clusters > ocfs2 >

Hi, I am having a two node cluster with rhelu2 OS installed and when i am trying to mount with ocfs ,i am getting the error pasted below. "ocfs2_hb_ctl: Bad magic number in superblock while reading uuid mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted" I am getting this error in only one node and in other node it is ok. Is it because in the

/dev/rawctl is part of the "raw block device" driver interface. You need to turn on the raw device driver option (CONFIG_RAW_DRIVER) in your kernel build. I have always created a new file system from my 2.4 kernel (that has all possible modules built and properly configured to load when needed), so I don't know for sure if mkfs.ocfs will work correctly after turning on the raw

Hi! Seems we're facing some memory leak here. This is vanilla 2.6.19-rc6 on a x86_64 box, 4GB RAM. A simple `ls -Rn' on a filesystem with lots of files makes the box leak so much RAM that the OOM killer starts to kick in. With slab alloc debugging turned on, we see this: # mount; ls -Rn; wait some seconds; Ctrl-C [root@lnxp-1038:/backend1]$ cat /proc/slab_allocators | egrep

Hello all, are there any issues concerning ocfs2 (v 1.2.3) and device-mapper-multipath-0.4.5-12.0.RHEL4? I've build a 4 node cluster with two ocfs2 mounts on /dev/dm-0 and /dev/dm-1. Under heavy load the nodes dies after about two minutes reproducably ;-(( Once I've loaded the ocfs2 modules it seems to me that both modules (device-mapper-multipath related as well as ocfs related) are

I am in the middle of rolling RHEL 4 update 5 ( 2.6.9-55) through my servers. We use a development, QA, and production rollout. Unfortunately I have ocfs members in each of these groups that need to share filesystems. The network compatibility issues between ocfs2 tools 1.2.4 and 1.2.5 are causing the members to not be able to operate with ocfs. Hence this breaks my systems or causes me to

I am working currently on cloning on a regular basis our production OCFS2 volumes to our test environment. For the database (Oracle 10G R2 RAC) we put it into backup mode, then execute a Snapclone on our 3Par SAN. Then we use RemoteCopy and SnapClone to our development 3Par SAN. To recover the OCFS2 volume I got through the following steps: Stop database umount /export/<volume name> Log

Hello Ladies and Gents .. First time poster .. I have been experiencing several issues with unexplained Fencing and silly mount/unmount errors With Version 1.4.7 on UEK (Red Hat Enterprise Linux Server release 5.3) running under kernel 2.6.18-128.el5 With ocfs2console-1.6.3-2.el5,ocfs2-tools-1.6.3-2.el5 & ocfs2-2.6.18-128.el5-1.4.7-1.el5 RPM Packages. You See, the problem is that I was

We are in the process of upgrading to OCFS2. We have recently restored our Production Database to a Development platform configured with OCFS2 with RMAN. No problems. As for the Production migration, we understand that you cannot mount an OCFS volume (our current configuration) with OCFS2. We are interested in mounting an EXT3 file system, performing a cold RMAN backup, copying the datafiles