similar to: vlan is not working in snv_109?

Hi Folks, I have a snv_105 sxce host that I just can''t get to work as expected with crossbow + zones. My test host persephone, is a virtual machine running under VMware ESXi 3.5, with 2 virtual network cards (e1000), all on the same flat network/subnet. It started life just 2 days ago with a clean install of snv_95, and I LUed to 105 yesterday. To rule out any sharing issue, the first

Hi All, I have bfu''ed to net-virt_xb-21_snv_81_021308. The dladm command on my machine does not have create-etherstub option. Please let me know what could be the issue. Thanks Khushal

redirecting to crossbow-discuss... On 03/12/09 15:17, Andrew Gabriel wrote: > In snv_108, I''m playing with creating a vnic over an etherstub, and I > might not be doing it right, but the behaviour I''m seeing doesn''t look > right either. > > So this is what I did... > > # dladm create-etherstub estub0 > # dladm create-vnic -l estub0 vnic0 > #

Hi, I''m running Nevada 75a configured as dom0. I added a domU HVM running Nevada 75a, on a Sun X4600 with 8 ADM Dual cores. I can get the domU installed and configured, however, I can not get any network connectivity. I followed the steps accoding to documents on Open Solaris. I also followed some of the threads of the list to verify the configuration, but I can not fix the

Hi, I''m running snv_89 on an X4150 with a CentOS-5 guest. I cannot seem to get my second network interface to work properly. I followed the virt-install instructions, and even saw the FAQ entry about adding a second network instance in the XML config. I see my second device in the guest but it''s either connected to the wrong interface or not at all. I''d like to

Ok, I''m hoping this is a fairly trivial issue, and I''m missing something. I''m trying to use Solaris zones (Nevada Build 117) to act as a DMZ and a router, using exclusive IPs, VNICs (from Crossbow), and connecting to the internet (static IP from my ISP). I''ve got the DMZ working - that zone sees the internet, can do name lookups, ftp, telnet, ssh, etc etc etc.

Two hosts, A and B. igb0 on A connects to e1000g1 on B. host A # dladm show-link LINK CLASS MTU STATE BRIDGE OVER igb0 phys 1500 unknown -- -- e1000g0 phys 1500 up -- -- e1000g1 phys 1500 up -- -- igb1 phys 1500 up -- -- e1000g1vnic1 vnic 1500 up -- e1000g1

I have a requirement in my current project to support multiple co-located zones on the same VLAN. Our current deployment OS is Solaris 10 Update 4. I''d like to use exclusive IP zones, but I gather the only way to currently have multiple exclusive zones with interfaces on the same VLAN is through the use of VNICs. From my initial look at S10u4, it seems VNIC support been not yet been

On OpenSolaris 2009.06 I created a flow, half a dozen VNICs, and I set some properties, and everything was working, then I rebooted my system and everything disappeared from show-vnic, show-flow, and show-prop. When I tried to re-create the objects, dladm said they already existed. While I could not see the objects, I could delete them. Example: # dladm show-vnic # dladm create-vnic -l bge0

1 simple question about network statistics for vnics: We noticed that the statistics for vnics (used by Virtualbox guests) are not there. When the nics are plumped in the host OS, we do see them showing up, but all all records are 0. Can someone tell me how to get the correct network info via snmp on the Vbox Host?? Thanks in advance. IF-MIB::ifDescr.1 = STRING: lo0 IF-MIB::ifDescr.2 = STRING:

On 03/25/09 12:30, James Carlson wrote: > Girish Moodalbail writes: > >> bash-3.2# dladm show-link >> LINK CLASS MTU STATE PROMISC OVER >> e1000g0 phys 1501 up off -- >> e1000g1 phys 1502 up on -- >> > > That (plus or minus some column alignment) seems

Dear Experts, Does anyone install Windows Vista on XVM successfully? I am using machine Sun x4600 with AMD 8218 cpu with virtualization feature. i installed OpenSolaris build 75, My installation steps: # svccfg -s xvm/xend setprop config/vncpasswd = astring: \"secret\" # svccfg -s xvm/xend setprop config/vnc-listen = astring: \"0.0.0.0\" # svccfg -s xvm/xend setprop

Howdy, I just installed the crossbow snapshot from opensolaris.org, and bumped into an issue when attempting to create a virtual nic: $ dladm create-vnic -i 192.168.1.101 -d ni0 2 dladm: VNIC creation failed: No such file or directory (unknown diagnostic) When I truss the process, it looks like it''s failing when attempting to open the vnic pseudo-device: 100878/1:

Hello all, I''ve recently observed some strange behaviour on several DomU (spread over several xen setups). While I''ve found a few reports on similar issues, the discussions were fairly old and discontinued without providing a cause or solution. Every once in a while (sometimes with an interval of several months) I get a "host down" alert for a guest host. The host is

Hello, I have trouble activating the G.729 codec in Solaris. It seems the module doesn't try to read the license file at all. Although the module loads (it's listed in show modules), "show g729" gives "No such command" error and this is posted in the messages log: Oct 27 18:09:40 NOTICE[19336] codec_g729.c: G.729 transcoding module version 32, Copyright (C) 1999-2007

ZFS experts! cu is looking for _documentation_ about putting zone paths on zfs. cu is running 5.10 KP 137111-06. he needs to make sure u5 kp is ok with zone roots. Also has FSs mounted via legacy. So...anybody have documentation on which u5 or u6 of Solaris (NOT OpenSolaris) supports zfs, if any update, for zone paths? -Brian -------- Original Message -------- Subject: RE: Sun#

Hi All, I have a machine with three network cards, and the third card(named e1000g2) is in use now. I want to use e1000g2 as default NIC when I create Guest. How can I change the default NIC? I can override the default value of config/default-nic property of svc:/system/xvm/xend. But xend still use e1000g0 when creating Guest. BTW, I can explicitly set "bridge=e1000g2" when creating

Hardware Supermicro X7DAE (AHCI BIOS) dual Intel Woodcrest processors, 6 x Western Digital Raptor SATA drives. I have installed b62 running 64 bit succesfully on a PATA drive. The BIOS is configured to access the SATA drives in native mode using hte AHCI Bios. I have 6 SATA II drives accessed via the Solaris AHCI driver. I have created a ZFS file system across all 6 drives. This works fine until

Bfu 91 to 92 looks good Proceed with xVM upgrade . After running:- # sunos.hg/bin/build-all nondebug bash-3.2# cd packages-nondebug bash-3.2# pwd /usr/tmp/packages-nondebug bash-3.2# ls -l total 20 drwxr-xr-x 4 root root 512 Jun 21 08:57 SUNWlibvirt drwxr-xr-x 4 root root 512 Jun 21 08:57 SUNWlibvirtr drwxr-xr-x 4 root root 512 Jun 21 08:57 SUNWurlgrabber

After BFU-ing my system to b75 I ended up with a panicing system when booting into Xen: grub> #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- grub> title Solaris on Xen grub> kernel$ /boot/$ISADIR/xen.gz grub> module$ /platform/i86xpv/kernel/$ISADIR/unix /platform/i86xpv/kernel/$ISADIR/unix -B console=ttyb grub> module$ /platform/i86pc/$ISADIR/boot_archive grub>