similar to: Hardware compatibility IM-945GC Intel Atom Mini-ITX]

Can this MB be used with Centos 4 (or 5)? For reference: http://www.logicsupply.com/products/ms_9832 I don't think we can use this new MB since the Realtek 8111C does not seem to be supported (well) http://forums.tweaktown.com/f69/8111c-nic-revision-ep45-27089/ -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- -

Hi, I am trying to install centos on the intel D945GCLF board. It's a mini-ITX board with the atom processor and it uses the Realtek RTL8102EL LAN chipset. When I disable the on-board LAN card it installs and runs OK, but when I enable it, I get kernel panic at boot. The board runs perfectlj with Fedora 9 (with the latest kernel) or with Ubuntu server. My question is: is there some way

Executive Summary: Realtek has an r1000 driver for the rtl8110sc NIC at http://www.realtek.com.tw/downloads I've posted this in the forums but it looks like all the action for CentOS really happens here on the mailing list. Plus I hope this might help some other lost soul since google failed to connect this motherboard to *any* mention of the r1000. I thought I found a great little

You can get the Linux driver from http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=5&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false#RTL8111B/RTL8168B/RTL8111/RTL8168%3Cbr%3ERTL8111C/RTL8111CP/RTL8111D%28L%29%3Cbr%3ERTL8168C/RTL8111DP if you can't find it under C7 Regards On Fri, Jun 3, 2016 at 8:11 PM, Alessandro Baggi <alessandro.baggi at

Realtek is "real" good about getting drivers for their chips into the kernels as soon as possible. They are one of the few vendors that I have never had a problem with built in support... Mike McCarthy On 06/03/2016 08:03 AM, Phil Manuel wrote: > You can get the Linux driver from >

Hi, Is there a way to make use of hardware monitoring on Intel 945GCLF (with Atom 230 cpu)? It is relatively new child of Intel, but maybe someone figured it out yet. pciconf -lv shows this: ichsmb0@pci0:0:31:3: class=0x0c0500 card=0x464c8086 chip=0x27da8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) SMBus

The 8168B (02) NIC works well except that it does not go into promiscuous mode despite advertising itself in that mode after being so directed with ifconfig. Unfortunately, the little box is destined to be an IDS monitor, so that function is essential. The board is an Intel Atom 330 run as x86_64, the nic is internal. We tried three drivers: the one in the 2.6.18-128.1.10.el5 kernel yields

Hi, I have a EPIA mini-itx board that I have been running Fedora 4 on. I want to install CentOS 4.4 on it since FC4 is no longer supported. The install goes fine but when I reboot the machine after the install I get errors like the following: hda:<4>hda: dma_timer_Expiry : dma status == 0x21 There are other errors about not being able to access the disk and eventually the kernel panics.

Does anyone have recommendations for (or against) mini-ITX platforms to be used with Wildcard X100P and TDM400P cards? I am considering the use of systems using VIA EPIA CL and Epia M as small, quiet platforms on which to host Asterisk.

-------------- next part -------------- An embedded message was scrubbed... From: Steve Rodgers <hwstar at rodgers.sdcoxmail.com> Subject: Via Mini-itx anaconda install failure Date: Sat, 1 May 2004 14:31:43 -0700 Size: 849 URL: <http://lists.centos.org/pipermail/centos/attachments/20040501/e69b2948/attachment-0005.mht>

Hi Everyone, I'd be grateful if anyone can help with a couple of queries I have. Recently I downloaded Centos 3.3 and cannot get it to install I my system. The system I am using to install is a based on an original EPIA Mini-ITX m/board. At a certain point in installing it comes up with an error saying something like "system not supported". Can anyone advise if they have got

I've got Asterisk up and running on a VIA mini-itx M10K with a TDM-400 card but I'm having a terrible time with the sound setup. I tried RH9 and Debian distributions, with 2.4.18, 20, 22, 24 and 26 kernels. I've used the VIA drivers, ALSA drivers, OSS drivers and Kernel drivers with varying results. I can setup the audio to work with a few different applications, 2 channels and 6

> > JR Richardson wrote: > > > I?ve got Asterisk up and running on a VIA mini-itx M10K with a TDM-400 > > card but I?m having a terrible time with the sound setup. I tried RH9 > > and Debian distributions, with 2.4.18, 20, 22, 24 and 26 kernels. I?ve > > used the VIA drivers, ALSA drivers, OSS drivers and Kernel drivers > > with varying results. I can

I already installed rsync on both my server(running FREEBSD 4.4) and win98 macine. My LAN don't connect to the internet so it is quite secure, is it possible if I don't use OpenSSH? when I run "rsync 172.22.0.104::", I get this message: "failed to cennect to 172.22.0.104 - Resource is remote" 172.22.0.104 is the ip address of my server. It is running rsync as a

Hi, As the subject suggests, I am trying to remote boot a Mini-ITX system. I am using PXELinux as the bootloader, and Memdisk (2.11) as the 'kernel'. My ramdisk image is a hard drive image based on PC-DOS. Two things go wrong during the boot process. 1. "INT 13 08: Failure, assuming this is the only drive" message 2. "Loading boot sector... booting..." message,

I am looking into convising the boss to get me a mini-itx system to replace my workhorse notebook (I have to have a corp notebook and I can remote terminal into a Centos server from it). So I have been playing with one mini-itx system (the decTOP) and am looking at my options. I want a fast processor, 1Gb memory, LAN, 4USB, VGA. Wireless and bluetooth optional USB dongles along with a

Hello everyone, Does anyone out there have actual experience with running * on a mini-itx board from VIA? They look good, but I have some reserves because of VIA's problems with PCI latency in recent years (audio dropouts, wierd things happening). I am looking at the EPIA CL-10000. For $270, I can get a CL-10000 (1ghz C3, dual ethernets, etc), 256mb RAM, and a nice small (12 x 2 x 11)

All, wondering if you can help, I had a perfectly working Mandrake 9.2 box running on a via Mini ITX 5000/classic. Asterisk (zaptel and libpri) was built from CVS head around 22nd July 2005. I decided now was a good time to ghost it up....although humorous for you all suffice to say, I ended up with a partitionless box! Following the install script I had created I built an identical server to

Just to drag this thread on a bit further ... I've been looking into these little boxes, thinking I could use one as a firewall/gateway. My one requirement is that it would need to have two PCI slots (one can be low-profile), and although I've seen PCI riser cards that can give me two slots, they've been rare, and cases that are suitable (i.e have the space, and back panels are

i had such problems on my mini-ITX. when sharing irq's with video or sound card, network traffic during ogg playing (for example on nfs) or quick moving windows crashed the interface. ifconfig down/up resolved the problem. it has been solved for a while now (i couldn't reproduce this problem) i think. regards, OLivier Le Jeudi 12 D?cembre 2002 03:45, The Anarcat a ?crit : >