similar to: LSI Logic raid status

Hello, I think this needs a few more eyes: http://lists.freebsd.org/pipermail/freebsd-scsi/2009-January/003782.html In short, writes are slow, likely do to the write-cache being enabled on the controller. The sysctl used in 6.x to turn the cache off don't seem to be in 7.x. Thanks, Charles ___ Charles Sprickman NetEng/SysAdmin Bway.net - New York's Best Internet - www.bway.net

http://wiki.freebsd.org/JailResourceLimits Is this anthing people are working on? Is it on its way to RELENG_7? Is there a 7-version of the patch or anything? This would be a _VERY_ useful feature. -- Peter Ankerst?l peter@pean.org

According to various posts the LSI SAS3081E-R seems to work well with OpenSolaris. But I''ve got pretty chilled-out from my recent problems with Areca-1680''s. Could anyone please confirm that the LSI SAS3081E-R works well ? Is hotplug supported ? Anything else I should know before buying one of these cards ? Thanks, Arnaud

Hi! Im running FreeBSD 9.1 on a AMD APU machine: CPU: AMD E-450 APU with Radeon(tm) HD Graphics (1699.36-MHz K8-class CPU) FreeBSD 9.1-RELEASE-p1 #0 r243379M: Fri Mar 8 23:16:44 CET 2013 root at pean.org:/usr/obj/usr/src/sys/GENERIC I try to use amdtemp(4) to read the temperature of this CPU but it doesnt seem to detect the CPU. The manual states that it should support K8-class. The

Hi, I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4. The problem is "-" appears on the screen and it never boots unless somebody hits the "Enter" key. Sometimes even PS2 keyboard doesn't respond during that time. Tried with USB keyboard, same problem. The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic (mpt-5.0.5.20.00 bios) LSI1030-IT

I posted a thread on this once long ago[1] -- but we''re still fighting with this problem and I wanted to throw it out here again. All of our hardware is from Silicon Mechanics (SuperMicro chassis and motherboards). Up until now, all of the hardware has had a single 24-disk expander / backplane -- but we recently got one of the new SC847-based models with 24 disks up front and 12 in the

https://bugzilla.mindrot.org/show_bug.cgi?id=2474 Bug ID: 2474 Summary: Enabling ECDSA in PKCS#11 support for ssh-agent Product: Portable OpenSSH Version: 7.1p1 Hardware: All OS: All Status: NEW Severity: enhancement Priority: P5 Component: ssh-agent Assignee: unassigned-bugs

Hello, Recently we bought HP bl35 blades with LSI Logic SAS controllers. mpt* drivers works fine but I would like to somehow view status from command line. To monitor e.g. if one of the HDDs failed. I found mptutil on LSI Logic site but it just shows me configuration in quite cryptic form. Thanks, Mindaugas

Hello, Since FreeBSD 9.1 I have strange problems with the distribution. Some servers are rebooting without any kernel panic, instanly. First i thought it's a problem with my KVM system, but one of my FreeBSD under a Dell R210 have the same problem. The servers concerned are now: - Monitoring server - LDAP test server - Some other servers, randomly (not in production). First i thought it's

Greetings, In looking for inexpensive JBOD and/or RAID solutions to use with ZFS, I''ve run across the recent "VTrak" SAS/SATA systems from Promise Technologies, specifically their E-class and J-class series: E310f FC-connected RAID: http://www.promise.com/product/product_detail_eng.asp?product_id=175 E310s SAS-connected RAID:

I''m looking at the newly-orderable (via Sun) STEC Zeus SSDs, and they''re outrageously priced. http://www.stec-inc.com/product/zeusssd.php I just looked at the Intel X25-E series, and they look comparable in performance. At about 20% of the cost. http://www.intel.com/design/flash/nand/extreme/index.htm Can anyone enlighten me as to any possible difference between an STEC

Hi all, I just upgraded more servers, and doing some tests I found that my setup for kerberos/ldap authentication against Active Directory is no more working. I don't know why... I followed some times ago scott Lowe blog for this setup : http://blog.scottlowe.org/2007/01/15/linux-ad-integration-version-4/ And it was working correctly until the upgrade. What is curious is that id command

Hi, I have a Dell T710 with 4 X 10G ethernet interfaces (2 X Dual port Intel 82599 cards). It is running FreeBSD RELENG_8 last updated on July 13. What I see is packet loss (0 - 40%) on IPv6 packets in vlans, when the machine is not the originator of the packets. Let me try to describe a little more. If a neigbouring machine ping6 it, there will be packet loss. If it act as a router for ipv6,

Hi folks! I am currently involved in project which uses LLVM JIT and I have a couple of questions for you: 1) According to http://llvm.org/Features.html LLVM JIT supports only X86 and PowerPC, but LLVM code generator supports ARM too. Are there any plans for JIT to make support also for ARM backend? 2) Could LLVM JIT collect some hot traces from overall code and execute it separately (after

https://bugzilla.mindrot.org/show_bug.cgi?id=2305 Bug ID: 2305 Summary: sshd does not accept @cert-authority when doing host based authentication. Product: Portable OpenSSH Version: 6.5p1 Hardware: amd64 OS: Linux Status: NEW Severity: normal Priority: P5 Component:

Hello, While shopping for another 3Ware card, I found that this market has gotten much larger since I bought my 6500. So I started looking at the various cards while browsing the hardware notes for FreeBSD 4.8 and 5.1. So I'm wondering if anyone can provide some insight here. -3Ware has a whole new series of cards. The twe(4) manpage states that only 5xxx and 6xxx series cards are

I created a small example to show something that I do a lot of. "scale" data by month and return a data.frame with the output. "id" represents repeated observations over "time" and I want to scale the "slope" variable. The "out" variable shows the output I want. My for..loop does the job but is probably very slow versus other methods. ddply

Hi all, First, I''ll say my intent is not to spam a bunch of lists, but after posting to opensolaris-discuss I had someone communicate with me offline that these lists would possibly be a better place to start. So here we are. For those on all three lists, sorry for the repetition. Second, this message is meant to solicit help in diagnosing the issue described below. Any hints on

Hi all, I have had this problem since day 1 on my new server. It has run since November 15th 2008, and serve approx. 10 GB worth of web traffic per month for the main site and then some 40 domains with mail and small web pages. (hence - it's NOT that busy yet) I started with 7.1-RELEASE-pX since I didn't have problems straight off - but it didn't last long. After a few days of

i cannot read or write any disk inserted in my acd0 <PIONEER DVD-RW DVR-111D/1.29> when this device in udma mode. kernel endlessly repeat that acd0: setting up DMA failed and I can access my data on dvd or cd only if I set atacontrol mode acd0 pio4 Does anybody have such a problem too? is there any ways to bring this device into udma mode again? dmesg: ... atapci1: <ATI IXP600