similar to: [Bridge] Flushing MAC-tables(?)

Hi list, I bought two UTStarcom F1000 phones, pre-equipped with the latest firmware, including WPA support. Those are configured to register to an asterisk server on the internet (not LAN), and registration works. Calling and being called also, with transfer and all bells and whistles. After a few minutes up to 5 hours (varies widely), the display tells me that an Accesspoint is not available

Hi, i''m trying to use PCI passthrough feature on Xen 4.0 but it fails on my Wireless card. I use Xen 4.0 on a Debian 6.0 (package from repo) and try to passthrough the following PCI device root@omega:~# dpkg -l | grep xen ii libxenstore3.0 4.0.1-1 Xenstore communications library for Xen ii linux-image-2.6.32-5-xen-amd64 2.6.32-30 Linux 2.6.32 for 64-bit PCs, Xen dom0 support ii

hi list members, my goal is to make one of my DomU''s act as a wireless accesspoint... So, i need it to have access to the pcmcia wlan card attached to dom0. But how ? when i give the pci=[] option to the domU config file its shows up with lspci but i cant use it... (on debian with module-assistent get rt2x00 in de DomU) Is it possible or would it be better to use a more direct interface

Hi I have read the howto on qdisc''s a few times but I cant figure out how to use the shaping capabilities to serve my needs. In the village whera I live we have created a wireless local network consisting of 10 houses. One of these houses has an ADSL connection and services this connection to the other houses. To gain access to the network a member must have an accesspoint in client mode,

Hi! I have some problems with an bridge between wlan0 and eth0 device... It works and I can from both sides ping the router with the bridge device but I cant ping the devices from other net so I cant ping wlan devs from eth net and other way around the wlan card is an atmel usbw11 from linksys and eth is a intel e100 10/100mbit nic I have configured the bridge according to the how to and

Reindl Harald <h.reindl <at> thelounge.net> writes: >bloatware means unsecure, uncomfortable webinterfaces with limited >functionality compared what iptables alone offers you with some knowledge > all that embedded crap is for people which needs handholding and have > fun to own a dozen of halfbaken devices instead just one real box It seems you still have some

changed mode from router to switch on 2 Linux and 2 WinXP nodes. configured Linux bridging per the website and that worked for hardwired ethernet over cat5. For the wifi wireless xp clients, i didnt have any luck. Maybe i did something wrong, but it seems so easy to create a bridge in xp. highlight 2 or more nics, right click and choose bridge. Did it numerous tmes years ago, but not sure w

So, I'm setting up my first bridge, and I'm running into an interesting issue. I have a 4 port NIC (formerly 4 seperate /29 and /28 LANs) and an onboard NIC (to my ISP). I've setup the bridge using the script included at the bottom of this email (modified from Gentoo for Aurora). When the WET11 (the WET11 is a simple ethernet to wireless bridge) is unplugged, the bridge works

:) ... the long lease is for some Accesspoints which we dont like to configure static, just plug in and run. /G?tz Am 06.07.16 um 10:24 schrieb Eero Volotinen: > DHCP uses FFFFFFFF16 to represent an infinite lease. Try if it's supported. > Anyway, it's insane value as year lease time :) > > Eero > > 2016-07-06 11:22 GMT+03:00 G?tz Reinicke - IT Koordinator < >

The situation is this: INTERNET -- ROUTER -- ETHERNET+WIFI -- PC's The conection between INTERNET and ROUTER is done with 2 LINKs with static IP's. The conection between ROUTER and PC's is done via ETHERNET lan with many bridges and ACCESSPOINTS. The PC's are in a IP subnet, the BRIDGES in another IP subnet, the AP's in another IP subnet. The ROUTER has 1 bridge interface

Hi, I'm inter-connecting AccessPoints using a tinc mesh and have bridge-nodes to bridge this vpn into some existing backbone. The AccessPoints bridge their users into 802.1q VLANs (per WiFi-Client, there can be multiple VLANs active on each AP) in the tinc mesh, and the bridge nodes bridge some vlans into the backbone. Now there is a router in the backbone that uses the same MAC on all VLANs,

hello i wish to install (Active Directory & Domain Controller) & 802.1x Openradis so i could easy manage some User and a couple of Accesspoint i have a question about this https://wiki.samba.org/index.php/Setting_up_Samba_as_an_Active_Directory_Domain_Controller Provisioning Samba AD in Interactive Mode what does Realm mean and Domain would this be only "example.com" have a

Hi all, Im preparing a quote for a 5 Star hotel, planning to have around 100 SIP Wifi phones for PBX operations running on 100 AccessPoints. Network is running in ARUBA Networks - AP70 access points. The initial recommendation is to go for Hitachi Wifiphones, but i would like to know from the group the recommendations. Im planning to put up Asterisk as the PBX, Please advice me the do's and

[desktop] ----- lan ----eth0 [notebook] eth1 192.168.?.? ` ----- wlan ---- [speedport(hub and router)] -- internet 192.168.2.x So on my laptop I have eth0 beeing lan, eth1 beeing wlan ethernet card. When only using eth0/1 everything is fine. Now I want to be able to use internet from both [desktop] and [notebook]. Typically you set up a bridge with

Am 12.03.2016 um 12:16 schrieb Andy Walsh: > Reindl Harald <h.reindl <at> thelounge.net> writes: > >> bloatware means unsecure, uncomfortable webinterfaces with limited >> functionality compared what iptables alone offers you with some knowledge > >> all that embedded crap is for people which needs handholding and have >> fun to own a dozen of halfbaken

Reindl Harald <h.reindl <at> thelounge.net> writes: > most likely because there is no serious market > > if i want a NAS i buy a NAS > if i want a router i buy a router > > > no struggle with updates and security holes > no struggle with software versions > no struggle with "i can have this and this but not combined with that" > no struggle

Hi Nik, Flushing MDB can only be done when we are managing it per station not per port. For that we need to have MCAST_TO_UCAST, EHT and FAST_LEAVE. Here one more point is - some vendors may offload MCAST_TO_UCAST conversion in their own FW to reduce CPU. So, the best way is to have MCAST_TO_UCAST enabled and MDB will become per station, so we can delete MDB on disconnect. Shall, I create one

Reindl Harald <h.reindl <at> thelounge.net> writes: > no, it's not for the masses, for the masses is what comes out-of-the-box > > there is not much difference between replace the operating system on a > mass-product and just setup my own box from-scratch in the end > i know what modern arm based devices can do > > the HP microserver comes with a >

I'm having a wireless connection issue with an HP laptop and a Zotac media server after the 6.4 package updates from CR repository. Nothing changed with wireless config as far as I can tell. Both have been working fine with previous releases of 6.x. Oddly, if a cat 5 cable is connected for a few seconds and then disconnected the wireless works fine and survives a 'service network

Hello, can CentOS 6.8 be run on a mini-PC like this? https://www.zotac.com/product/mini_pcs/zbox-ci323-nano would like to configure this as a Firewall, and this should be instead of my router (integratet firewall, NAT) and wlan-ap Thanks, Walter