Displaying 20 results from an estimated 200 matches similar to: "[HCL] Liebert GXT4-1500RT120 supported by usbhid-ups"
2017 Jun 03
0
Fwd: Emerson Liebert GXT4
On Jun 2, 2017, at 8:28 AM, zefanjas <nut at zefanjas.de> wrote:
> I couldn't get the GXT4 working with usbhid-ups driver. So I need some
> advise to continue to get this device working. The GXT3 seems to be
> working ok with NUT (http://networkupstools.org/ddl/Liebert/GXT3.html).
>
> Here is my ups.conf
>
> [ups]
> driver = usbhid-ups
> port =
2017 Jun 02
2
Fwd: Emerson Liebert GXT4
Hello,
we have a Emerson Liebert GXT4, that we like to connect to our servers
to shut them down if there is a power failure (which happens quite often
in our area).
I couldn't get the GXT4 working with usbhid-ups driver. So I need some
advise to continue to get this device working. The GXT3 seems to be
working ok with NUT (http://networkupstools.org/ddl/Liebert/GXT3.html).
Here is my
2017 Jun 05
2
Fwd: Emerson Liebert GXT4
Hi,
thanks for your helpful reply. I've added the productid in the ups.conf
and it seems to work (better) now.
> After starting the driver and upsd, what does "upsc ups" return? If you can also include "upsrw ups" and "upscmd -l ups" output, we can update the DDL.
#upsc ups
Init SSL without certificate database
battery.charge: 100
battery.charge.low: 20
2017 Apr 17
1
New UPS information - Liebert GXT4 via US
Hi UPS List members,
I have purchased a number of Emerson Power / Liebert GXT4 UPS units.
I have these working correctly under nut, but limited detsils are being reported.
I am happy to supply information on the USB communications to improve the reported details
I can use WireShark to capture the comms between the supplied Windows GUI tool and the UPS
Please advise the best way I can
2017 Jun 05
0
Fwd: Emerson Liebert GXT4
On Jun 4, 2017, at 8:32 PM, zefanjas <nut at zefanjas.de> wrote:
>
> Hi,
>
> thanks for your helpful reply. I've added the productid in the ups.conf
> and it seems to work (better) now.
>
>
>> After starting the driver and upsd, what does "upsc ups" return? If you can also include "upsrw ups" and "upscmd -l ups" output, we can
2017 Jun 05
1
Fwd: Emerson Liebert GXT4
Hi,
>> #upsc ups
>>
>> Init SSL without certificate database
>> battery.charge: 100
>> battery.charge.low: 20
>> battery.charge.warning: 0
>> battery.type: PbAc
>> battery.voltage: 1.0
>> battery.voltage.nominal: 0.0
>
> Similar to Mike's report on the CPS UPS, the HID descriptor for this device is buggy:
>
> Logical
2023 Nov 12
0
Salicru and usbhid-ups
I have a device that seems almost, but not quite supported, I'd like
very much to help get it working, though I am no programmer. Feel free
to ask me to test :)
This could probably go in https://networkupstools.org/ddl/ :
-------file:
Salicru__SPS_2000_ADV_T__usbhid-ups__2.8.1-94-gd59c05349__01.dev , or
maybe 1__2000__usbhid-ups__2.8.1-94-gd59c05349__01.dev
# DEVICE:URL:VENDOR:
2024 Sep 25
0
HCL Cleanline L-1000C nutdrv_qt
Cleanline L-1000C
upsc output:
Init SSL without certificate database
battery.charge: 100
battery.voltage: 13.2
battery.voltage.high: 13.00
battery.voltage.low: 10.40
battery.voltage.nominal: 12.0
device.type: ups
driver.debug: 0
driver.flag.allow_killpower: 0
[driver.name](http://driver.name/): nutdrv_qx
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
2023 Nov 27
2
APC Modbus support is finally here!
Thanks again,
Great to see confirmations of more and more things working!
> I wonder what's the fastest method to test the function (previously I
setup the ups and unplug the utility from the ups for testing).
> is "upsrw driver.flag.allow_killpower=1" then "upscmd driver.killpower"
the correct testing procedure?
At least by intent of this new feature -- yes.
2023 Nov 27
2
APC Modbus support is finally here!
Thanks again,
Great to see confirmations of more and more things working!
> I wonder what's the fastest method to test the function (previously I
setup the ups and unplug the utility from the ups for testing).
> is "upsrw driver.flag.allow_killpower=1" then "upscmd driver.killpower"
the correct testing procedure?
At least by intent of this new feature -- yes.
2023 Nov 27
1
APC Modbus support is finally here!
Jim Klimov <jimklimov+nut at gmail.com>
>
> I believe some fixes were applied to the branch since your report (most visibly, about battery time settings), are you in position to test how it behaves now? :)
Hi:
I got another ups for testing. so I test the new commit for both
APC SRT3000XL and SMT2200RM2U. the results below:
1. I get the new attribute "ups.test.result" for
2023 Nov 27
1
APC Modbus support is finally here!
Jim Klimov <jimklimov+nut at gmail.com>
>
> I believe some fixes were applied to the branch since your report (most visibly, about battery time settings), are you in position to test how it behaves now? :)
Hi:
I got another ups for testing. so I test the new commit for both
APC SRT3000XL and SMT2200RM2U. the results below:
1. I get the new attribute "ups.test.result" for
2023 Nov 24
1
APC Modbus support is finally here!
I believe some fixes were applied to the branch since your report (most
visibly, about battery time settings), are you in position to test how it
behaves now? :)
Thanks in advance,
Jim Klimov
On Wed, Nov 22, 2023 at 3:20?PM Jim Klimov <jimklimov+nut at gmail.com> wrote:
> Great! Thanks for the info, and hope the driver author can address the
> nits (forwarding now...)
>
> Jim
2023 Nov 24
1
APC Modbus support is finally here!
I believe some fixes were applied to the branch since your report (most
visibly, about battery time settings), are you in position to test how it
behaves now? :)
Thanks in advance,
Jim Klimov
On Wed, Nov 22, 2023 at 3:20?PM Jim Klimov <jimklimov+nut at gmail.com> wrote:
> Great! Thanks for the info, and hope the driver author can address the
> nits (forwarding now...)
>
> Jim
2023 Nov 22
1
APC Modbus support is finally here!
Great! Thanks for the info, and hope the driver author can address the nits
(forwarding now...)
Jim
On Wed, Nov 22, 2023, 15:05 d tbsky <tbskyd at gmail.com> wrote:
> Jim Klimov via Nut-upsuser <nut-upsuser at alioth-lists.debian.net>
> >
> > Got an update for APC Modbus users: a new PR is waiting for real-life
> testing for settable variables and instant commands
2023 Nov 22
1
APC Modbus support is finally here!
Great! Thanks for the info, and hope the driver author can address the nits
(forwarding now...)
Jim
On Wed, Nov 22, 2023, 15:05 d tbsky <tbskyd at gmail.com> wrote:
> Jim Klimov via Nut-upsuser <nut-upsuser at alioth-lists.debian.net>
> >
> > Got an update for APC Modbus users: a new PR is waiting for real-life
> testing for settable variables and instant commands
2023 Nov 22
1
APC Modbus support is finally here!
Jim Klimov via Nut-upsuser <nut-upsuser at alioth-lists.debian.net>
>
> Got an update for APC Modbus users: a new PR is waiting for real-life testing for settable variables and instant commands support.
>
> https://github.com/networkupstools/nut/pull/2184
>
> As before, a custom build of libmodbus may be needed for USB support (detailed in the earlier PR), but Serial and
2023 Nov 22
1
APC Modbus support is finally here!
Jim Klimov via Nut-upsuser <nut-upsuser at alioth-lists.debian.net>
>
> Got an update for APC Modbus users: a new PR is waiting for real-life testing for settable variables and instant commands support.
>
> https://github.com/networkupstools/nut/pull/2184
>
> As before, a custom build of libmodbus may be needed for USB support (detailed in the earlier PR), but Serial and
2024 Mar 04
0
Newer APC Back-UPS spurious events
Hi,
[ There is also a github issue about this here:
https://github.com/networkupstools/nut/issues/2347 ]
I have an APC Back-UPS BX1600MI purchased in January, attached by
its supplied USB cable to a Debian 10 machine. Initially using the
nut packaged in Debian 10 (2.7.4-8) this was unusable as the
usbhid-ups driver kept disconnecting every few seconds.
I upgraded to the git HEAD of nut and
2010 Nov 15
1
Liebert Intellislot support
Good morning,
I just had the chance this morning to get my linux box tied into our
network and talking to the UPS. I can now confirm that in NUT v2.4.3
snmp-ups (ietf) works with the Liebert Intellislot Web Card for the
GXT2 family of UPS'.
upsc output:
tux ~ # upsc workups at localhost
battery.charge: 100.00
battery.runtime: 2760.00
battery.runtime.low: 5
battery.voltage: 54.60
device.mfr: