similar to: FreeBSD 6.3 and Intel G33

My PC has built-in intel G33 graphics, which I'm trying to get to work in something better then vesa. Following the instructions in http://lists.freebsd.org/pipermail/freebsd-stable/2008-January/039638.html I have compiled and installed the driver and kernel modules from the git trees for drm and the xf86-video-intel driver from today. I also patched agp_i810.c to remove the comments from

Been running rock solid servers on Centos 3 and 4 for years but equipment is starting to die so it is time. I was thinking along the lines of an Intel Q6600 on an Asus P5K-VM mobo with the new G33 chipset utilizing SATA. Is anyone having success with this board or any of the G33 chipsets where I am not going to run into all kinds of install problems? I see these other threads of install

I have 2 new boxes that I cannot use yet because of problems supporting these newer chipsets in 5.1. Does anyone know when the CD version of 5.0 x86-64 that has support for these chipsets be available on any on a Centos mirror? Has the support for these chipsets been added to yum yet? Here are my latest results with these chipsets and Centos 5.1 1. Asus P5K, E6850, P35 Chipset: Does not

Dear, I''m looking to get Xen running on a system that (afterwards) seems a bit too new. The board has the Intel G33 chipset with the Intel ICH9 southbridge. This chipset is NOT supported by kernel 2.6.18 which ships with Xen 3.1.2 (and Debian Etch). So the question is: * What version of Xen to install to get going? Should I choose unstable? * What distribution will be the easiest to get

Last year to get motherboards with the G33 chipset with SATA working with Centos I had to either use David Harbic fixes or use Fedora 8 since it had the later 2.6.25 kernel. I no longer see David's fixes available and also see in the 5.2 release notes "update SATA driver and infrastructure". Did Redhat finally incorporate fixes to full support the new G33 chipset and SATA? I have

Hello all, Does anyone have experience with CentOS and the Intel P35 or G33 chipset? I've googled about and poked in the CentOS forums, but I've generally found questions without responses. I'm part of a university research group doing CFD (computational fluid dynamics). We're incrementally updating our computing power and have been looking at Intel quad-cores and the P35

I just installed CentOS 5.1 on a Dell Vostro 200 (Intel G33) which has a Sunix PCI-Express (x1) 8-port RS-232 card installed. For me it looks like only 4 ports are recognized, but I'm not sure if it's even working with those 4. >From 'dmesg' I see this: ... Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19

Can someone make a recommedation as far as best chipset for Centos 5.0 or 5..1 using a Q6600 series CPU?with chipsets that have onboard VGA?? From poking around it looks like the G33 and P35 are not supported or have problems until the newer 2.6.22 kernel (the?iso's appear to be earlier than that, think it was?.18)?? So I am considering boards with the Intel G965 chipset but not sure if is

Some background - I have a couple of NetBSD (i386) boxes and CentOS 5 boxes that I want to virtualise and I''m trying to work out which OS will be most suitable as the dom0. I have a desire to run at least RAID1 and ideally ZFS mirroring on the dom0 so I can have all the domU''s not have to worry about disk redundancy etc. My hardware : I have a brand new Intel E8200 core2duo and

Hi! I''ve got a motherboard (Gigabyte GA-G33-DS3R) where the Ethernet port has been broken. I''ll buy a new motherboard, but wants to keep all my other equipment (CPU, Memory, TV-cards etc). The requirements/wishes on the new motherboard are 2 Ethernet ports and 2 PCI slots. It would also be good if it would support VT-d. I''ve found two boards that would fulfill my

HI all, I am running FreeBSD 6.0-STABLE (of today) on a HP Pavillon (centrino based notebook with i915 graphic chipset). I am trying to use the latest drm hook for i915, but I get this error: drmsub0: <Intel i915GM> port 0x1800-0x1807 mem 0xb0080000-0xb00fffff,0xc0000000-0xcfffffff,0xb0000000-0xb003ffff irq 16 at device 2.0 on pci0 error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or

Dear Colleagues, I have a dataframe with variables: [1] "ID" "category" "a11" "a12" "a13" "a21" [7] "a22" "a23" "a31" "a32" "b11" "b12" [13] "b13" "b21"

Hi, One of my disks, partitioned into a single btrfs partition, is showing media errors. The problem is that these errors lead to kernel panic from btrfs - that make the filesystem unusable until reboot - and therefore it is very hard for me to do a full backup of the data prior to changing the disk. My current kernel is 3.2.0-8-generic from Ubuntu/precise (based on linux 3.2-final) but I

Hello, I'm trying to complete a minimal install of Centos 5.1 x86_64 on a Core 2 Duo 2.2Ghz running on an Asus P5K-VM motherboard - yes, this means it's the G33 chipset. (you can stop laughing now) I'm installing to two SATA-disks setup with Software Raid-1. I've installed an Intel NIC that is detected during install and I'm able to complete the install itself - mind you I

Hello everyone:) I have a problem running Wow on wine (ver.1.1.16). When I install wine and run Wow from my Windows's partition, it's running but FPS is very low (about 10 fps). I installed it on my linux aprtition, but nothing's changed. When I add -opengl option, logging screen (first screen after wow starts) it's lagging as hell and all options (I mean all places where

Hi all, I am running CentOS 7 on a NUC5CPYB. Intel video: 00:02.0 VGA compatible controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller (rev 35) When I take a screen shot I get "different" things. I use: export DISPLAY=:0.0 /usr/bin/xwd -silent -root -out screen; convert screen screen.png I tried import also for the screen

Package: xen-hypervisor-3.4-i386 Version: 3.4.3-1 Severity: important Dear Maintainer, I tried on 2 machines with ati's and intel's video card, both xservers fail to work. xserver works well with linux-image-2.6.32-5-xen-686(with out xen.gz) and linux-image-2.6.32-5-686. I also tried xen-hypervisor-4.0-i386, the problem is still there. Free fill to ask for more info.

????????????. ????? ??? ????????? ???????? ?? ????. ?? ??????? ?????????? ? ????????? ?? ????? ??????????? ?????? ????? ??? ???????? Gigabyte GA-P35-S3, ??????? ????? ?????????? ??????? ???????? Realtek RTL8111B/8111C. ??? ???????? ?? ????? ?????????? ?????????? ??????????? ????, ?? ????? ?????? ?????? ?????? ?????????? ?????? ?????????. ?

I'm trying to get stable booted on a little ITX board off of a CF card, but it hangs as it's trying to run init. Here's what the boot looks like. SMAP type=01 base=0000000000000000 len=000000000009fc00 SMAP type=01 base=000000000009fc00 len=0000000000000400 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=02 base=00000000ffff0000 len=0000000000010000 SMAP type=01

Hello, My server is experiencing occasional kernel panics when under moderate load. I'm attaching a crash dump and the dmesg output. I'm not sure how to read the kernel backtrace but it looks like the Intel NIC (em0) caused the problem. Occasionally, I used to get a "em0: watchdog timeout -- resetting" error message, but I never had a kernel panic. The problem started last