similar to: Upgrade to 6.3R failed (with freebsd-update.sh)

Dear All It is a little hard to give a good small example of my question,so I will show the full data on the bottom and the attachment.Maybe some one could tell me an appropriate way to show it.I'm sorry for the inconvenience. Q:How to generate a 53*53 diagonal matrix by my data Some problems confused me are that: 1.Since it is a diagonal matrix,I have tried to transform col1 and col2 to

I have seen that file ftp://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-3.4p1.tar.gz is continuosly changing. This seems strange to me as I expected it should be a 'frozen' file; The signature and diff file are still dated Jun 26. I am wondering whether this is intentional. Best regards, Wojtek

Greetings, Somewhere on my asterisk system, a calls come in in a certain context, for example, from-sip or from-pstn. Then the calls gets routed through the dialplan, and a macro gets called, and another one and then the call needs to be redirected to another number in the same initial context. And you can use Dial(Local/number/initialcontext) for that. Oops, this initial context is lost

I'm following the instruction from Jo?o Amaro from the page http://lists.digium.com/pipermail/asterisk-users/2005-February/090752.html Everything went fine until I run the 'make' command under asterisk-oh323-0.6.5. I got the error message chan_oh323.c:5220: too many arguments to function `ast_channel_register' I have attached the error message. I'm running asterisk CVS

This afternoon I finally figured out more with regarding to a strange clock-slip problem we have on our asterisk box. We have two TE410s, in E1 mode: TE410P version c01a009b They have their own interrupts: 66: 781648298 783747388 IO-APIC-level t4xxp 233: 253890977 1311504670 IO-APIC-level t4xxp They have their full 31 channels: span=3,0,0,ccs,hdb3,crc4 bchan=63-77,79-93 dchan=78

I have the following situation: I drop a call-file into the Asterisk spool directory and I get called back. That all works. And I have this script: #!/usr/bin/perl -w use Asterisk::AGI; my $AGI = new Asterisk::AGI; my %input = $AGI->ReadParse(); $AGI->answer(); my $i; $i = $AGI->channel_status(); $AGI->say_digits($i); $i =

Greetings, Our telco called last week, saying that a lot of channels on our PRIs are blocked. And with blocked they have the following description in the Siemens exchanges: BBAC BLOCKED BACKWARD This status is set when the partner exchange has a blocking set and the signaling of the trunk (non-CCS7) is able to report this blocking in the backward direction. This status can

Hi, For the project I've used the Eicon DIVA card. It has 8 BRI ports, and for about 25% of the time there are 7 or 8 in use. So we want to replace it with an E1 card. Only issue is, replace it with what? The idea we have been playing with was to get a Digium E1 card (we already have bought lot of Quad E1 cards :-) and then just put it back to back against Asterisk server. And instead of

The REV I card shows up in the PCI table as: 02:05.0 Network controller: Tiger Jet Network Inc. Intel 537 (or 02:05.0 Class 0280: e159:0001) Subsystem: Unknown device b119:0001 But the REV E/F shows up as: 02:0d.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface (or 02:0d.0 Class 0780: e159:0001) Subsystem: Unknown device b100:0003 One

Under Solaris 10 on a 4 core Sun Ultra 40 with 20GB RAM, I am setting up a Sun StorageTek 2540 with 12 300GB 15K RPM SAS drives and connected via load-shared 4Gbit FC links. This week I have tried many different configurations, using firmware managed RAID, ZFS managed RAID, and with the controller cache enabled or disabled. My objective is to obtain the best single-file write performance.

hail, I have a 7-stable: [matheus@xxx /usr/home/matheus]$ uname -a FreeBSD xxx 7.0-STABLE FreeBSD 7.0-STABLE #2: Sun Jul 6 15:03:26 BRT 2008 root@lamneth:/usr/obj/usr/src/sys/xxx_7 i386 and there exists three geom things. gconcat status Name Status Components concat/concat0 UP ad4 ad5 gmirror status Name Status Components

Hey, I got a weird one for you guys, I am running vanilla 1.2.4 and have all incoming calls come in as SIP from teliax. Twice over the past week 2 callers who have called in around the same time end up talking to each other instead of going through the ivr or at some point during the IVR. One said, yeah i was talking to another patient and we had a convo. I have double checked the dialplan and

Hi, I've been experimenting with an IPv4 and IPv6 VoIP setup using SER. I'm using Asterisk for voicemail, etc. but as this only works for IPv4, I had to do a number of tricks to get it going for IPv6 phones. I was wondering whether there is any interest or plans in the pipeline to have Asterisk IPv6-enabled. Any info, especially by the developers out there, would be welcome. Thanks, --

https://bugzilla.mindrot.org/show_bug.cgi?id=2543 Bug ID: 2543 Summary: Tracking bug for OpenSSH 7.3 release Product: Portable OpenSSH Version: -current Hardware: Other OS: All Status: NEW Keywords: meta Severity: normal Priority: P1 Component: Miscellaneous

My new PC has an internal 16-in-1 card reader connected via USB 2.0. The device is the Techsolo TCR-1640 (http://www.techsolo.de/product/cardreader/tcr_1640/index.php). I boot from a compact flash inserted in it and I can mount and unmount the same CF once the system has booted and has mounted the root partition from my graid3 array. The problem arise when I replace the inserted CF with another

Hi: We have a machine running 6.2-R-p10 and squid 2.6.17, and upgrade it to 6.3R yesterday, but squid will hang and eat 100% cpu time after restart about 1 hour later, machine still alive, and no response from squid. downgrade to 6.2-R-p10, everything ok again.. here is some infomations: machine type: FreeBSD 6.3-RELEASE #0: Wed Jan 23 01:58:39 CST 2008 CPU: Intel(R) Xeon(TM) CPU 2.40GHz

Seems our current libarchive? That support FreeBSD's tar implementation has a bug where it can create archives it cant read back. This can be seen by simply creating an empty tar.gz file and then trying to expand or list it. In doing the above you get the following error: tar: Unrecognized archive format: Inappropriate file type or format N.B. gtar can list and expand the created file

https://bugzilla.mindrot.org/show_bug.cgi?id=2594 Bug ID: 2594 Summary: Tracking bug for OpenSSH 7.4 release Product: Portable OpenSSH Version: -current Hardware: Other OS: All Status: NEW Keywords: meta Severity: normal Priority: P1 Component: Miscellaneous

tree: https://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost.git vhost head: 2b91e7f7cb5a6f12a2f43b200cb2d65a218237ed commit: 2b91e7f7cb5a6f12a2f43b200cb2d65a218237ed [6/6] vhost: batching fetches config: x86_64-allmodconfig (attached as .config) compiler: gcc-7 (Debian 7.4.0-13) 7.4.0 reproduce: git checkout 2b91e7f7cb5a6f12a2f43b200cb2d65a218237ed # save the attached

tree: https://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost.git vhost head: 2b91e7f7cb5a6f12a2f43b200cb2d65a218237ed commit: 2b91e7f7cb5a6f12a2f43b200cb2d65a218237ed [6/6] vhost: batching fetches config: mips-allmodconfig (attached as .config) compiler: mips-linux-gcc (GCC) 7.4.0 reproduce: wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O