similar to: qlogic qle2462 hba and freebsd stable on a dl360 g5

Hello, I'm trying to install FreeBSD 9.1 amd64 on an IBM x3550 M3 server. Installation went smoothly, RAID controller and network cards were successfully recognised. But, after the installation, the server fails to boot from disk. There were some posts, about two years ago, in this list implying that the problem lies in UEFI but I couldn't find any clear solution. Any suggestions would

Hello everybody, we recently got three Dell PowerEdge servers equipped with Qlogic QLE2462 cards (dual FC 4Gbps ports) and an EMC CLARiiON CX3-40 SAN. The servers with the FC cards were successfully and extensively tested with an older SUN StorEdge T3 SAN. However, when we connect them to the CX3-40, create and mount a new partition and then do something as simple as "tar -C /san -xf

I have been updating my FreeBSD systems for many years by updating and building from source. For the FreeBSD 9.2 cycle, I decided to use freebsd-update for binary update instead. I use Sendmail + Cyrus-SASL and the freebsd-update process only installed a 'bare bones' binary. How do I compile just Sendmail from source so that it uses my /etc/make.conf for the smtp_auth components?

Hi there, I have one server acting as a iscsi target running windows storage server r2 sp2 and the other server is running centos as an initiator. They are connected to a switch over a 1Gbit ethernet connection. the target is a Dell NF600 and the server running centos is a Poweredge R900. We want to move this configuration to a FC based installation using a Dell QLE2462 HBA (this is the hba we can

Hello All, Has anyone tried using a HP DL360 G5 with the Advanced iSCSI license? Cheers Tim _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hello. Recently I've ran into problems with HP Proliant booting off the network with menu.c32. Configuration -- several identical servers: HP Proliant DL360 G5 HP Bios P58 12/26/2006 Bootblock 09/18/2006 HP SmartArray E200i Controller (128MB, v1.20) Broadcom NetXtreme II Ethernet Boot Agent v2.8.5 When localboot is chosen from menu.c32 menu I get standard "PXE-M0F Exiting ...",

Any tips on solving the following performance conundrum: Asterisk 1.8.12.2 running on HP DL360 G5 and G7s tcpdump running to capture UDP 5060/SIP signaling to .pcap files All calls are ultimately B2BUA client -> asterisk -> PSTN Media stays on Asterisk at all times AGI script has exit handler that connects and updates an external database upon BYE from either side. I know that if exit

Hello Arno, Can apply the patch directly or should I recompile nut? Best regards, Panagiotis On 3/4/2015 5:06 ??, Arnaud Quette wrote: > Hello Panagiotis > > 2015-04-03 14:28 GMT+02:00 Panagiotis Kritikakos > <panagiotis.kritikakos at nikitec.gr > <mailto:panagiotis.kritikakos at nikitec.gr>>: > > Hello Arno, > > Question: have you also

Hi list, I have the choice to use RHEL4 or Centos4.x on a Dell PowerEdge2850 who is linked to an AX100 storage system. My question is: does the QLA200 (the pci fiber channel card) driver will work on CentOS 4.1 . For now the card is listed like this on CentOS 4.1: --- #lspci 09:04.0 Fibre Channel: QLogic Corp.: Unknown device 6312 (rev 03) --- What kind of modification must/can I do to the

Is it just me, or freebsd-update isn't yet shipping the openssl updates? I'm trying (on an SMP machine) to fetch them, but there seem to be none available. I'd like to confirm that sleep deprivation isn't the culprit here, so I've checked in /usr/local/freebsd-update/work/ and the subdirectory with the highest number contains the SA-06:21 files. Anyone seen that clue bat

Hello Arno, > Question: have you also tested oldmge-shut? > Otherwise, that might be interesting to do so and send back the > results of these tests... Yes, I've tried this as well with worse results unfortunately. This driver seems to be even more unstable. When it gets able to set communication with the UPS (which is not always the case), it usually lost it again after a while.

Hello all, OS name: FreeNAS 9.3 NUT version: 2.7.2 NUT installed method: Bundled with FreenNAS 9.3 Device: EATON 5SC 1000 (http://powerquality.eaton.com/Products-services/Backup-Power-UPS/5SC.aspx?cx=5&wtredirect=www.eaton.com/5SC&GUID=B81251A4-F34E-4373-94B3-B4FB3D0CBCA8) Problem description: This was originally reported as bug to FreeNAS

The machine in question is a DL360 G3 R03 Xeon DP 3060-512/533 (part number: 322471-421). It's the first HP-branded model we've had so far (previously all Compaq branded). It has 1Gb of memory and a couple of drives on the on-board SCSI controller (setup for mirroring in the SCSI bios). No SMP is setup right now (doesn't get far enough to do anything with it!). In any case, this

Hi, I got few servers (IBM HS20,HS21 blades, IBM xSeries 3650 & others) connected to a dual fabric san throught Qlogic HBA's (23xx, 24xx). Multipathing is done with device-mapper-multipath. On CentOS 4.x i can scan for new scsi devices without any problems, get them up with multipathing & use them without any problems. However, after i started installing CentOS 5.1 (did not

Hello Guys, I use Xen Server 3.4.3 version, with kernel xen 2.6.18.194. Recently we change any server for HP DL360 G7 with HP Smart Array P410i Controller, but when i install the Xen and reboot machine, the machine does not back because kernel panic happen. I checked the grub conf and see than after install xen server, the line "kernel /xen.gz-2.6.18-194.el5" has change to "kernel

Hi all, Just a couple of quick questions. I have a HP DL360 G4 (dual 3.0Ghzprocessors). The processors are EM64T. I am using a TE411P in the system. 1. Should I run the a x86_64 Linux (CentOS) or just go with the plain old 32 bit version? 2. This being a dual processor system, should I turn on or off hyper thrreading? Thanks..... -------------- next part -------------- An HTML attachment was

Hello Arno, Thanks for the quick reply. FreeNAS is FreeBSD-based. Yes, I could test a patch. As I have mentioned, this behavior is not seen at every single reboot but after most reboots. Also, some times, the connectivity can be lost without even rebooting. That is not very often can have happened a few times. Best regards, Panagiotis On 2/4/2015 5:44 ??, Arnaud Quette wrote: > Hello

greetings does the list at this url cover *all* options or are there some hidden or newer ones by chance? http://www.centos.org/docs/4/html/rhel-ig-x8664-multi-en-4/ap-bootopts.html i am playing with CentOS 4 on some Compaq dual PIII hardware. The first unit is an 1850R with dual 500Mhz. If you need more info please let me know. it is a basic unit with raid controller and a Gig of DRAM etc.

Hi *, I'm running into a problem configuring bonding on an HP DL 360 G4p, running 4.3 + tg3 driver version 3.43f. I'm connecting eth0 and eth1 to a Cisco 2948 (CatOS 8.1(3)) and receiving flapping notices. The ethernet address is that of the primary interface. I have tried several different modes, including balance-rr (0), active-backup (1), and balance-alb (6). All have the

I have been trying to install CentOS 4.3 on an HP DL360 G3 (with dual Xeon 3.2 GHz, a Smart Array 5i, and two 36 GB disks doing RAID 1 mirroring). I''m doing all defaults (including the disk and LVM setup) and using the "Minimal" checkbox at the bottom of the Custom machine type package selection screen, so it''s a very "vanilla" install. It zips through the