kadafax
2005-Oct-10 11:59 UTC
[CentOS] PE-2850 to AX100 via Qlogic Card (QLA200 HBA) on CentOS 4.1
Hi list, I have the choice to use RHEL4 or Centos4.x on a Dell PowerEdge2850 who is linked to an AX100 storage system. My question is: does the QLA200 (the pci fiber channel card) driver will work on CentOS 4.1 . For now the card is listed like this on CentOS 4.1: --- #lspci 09:04.0 Fibre Channel: QLogic Corp.: Unknown device 6312 (rev 03) --- What kind of modification must/can I do to the original RPM driver for it to work on CentOS? Am I stuck to use RHEL? Thanks for any advice.
Johnny Hughes
2005-Oct-10 12:02 UTC
[CentOS] PE-2850 to AX100 via Qlogic Card (QLA200 HBA) on CentOS 4.1
On Mon, 2005-10-10 at 13:59 +0200, kadafax wrote:> Hi list, > I have the choice to use RHEL4 or Centos4.x on a Dell PowerEdge2850 who > is linked to an AX100 storage system. My question is: does the QLA200 > (the pci fiber channel card) driver will work on CentOS 4.1 . For now > the card is listed like this on CentOS 4.1: > --- > #lspci > 09:04.0 Fibre Channel: QLogic Corp.: Unknown device 6312 (rev 03) > --- > What kind of modification must/can I do to the original RPM driver for > it to work on CentOS? Am I stuck to use RHEL? > Thanks for any advice. > > _______________________________________________The driver should work on both CentOS and RHEL ... was it written for a specific kernel? -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: <http://lists.centos.org/pipermail/centos/attachments/20051010/18db361b/attachment-0002.sig>
kadafax
2005-Oct-10 12:19 UTC
[CentOS] PE-2850 to AX100 via Qlogic Card (QLA200 HBA) on CentOS 4.1
Johnny Hughes wrote:> > >The driver should work on both CentOS and RHEL ... was it written for a >specific kernel? >--- # pwd /mnt/cdrom/files/common/files/linux # rpm -Uvh qla2x00-v7.00.01-3.i686.rpm Preparing... ########################################### [100%] error: %pre(qla2x00-v7.00.01-3.i686) scriptlet failed, exit status 255 error: install: %pre scriptlet failed (2), skipping qla2x00-v7.00.01-3 --- ok I am on a X86-64 arch, this may explain the above behavior ?