similar to: Panics and freeze using age0

Hello, I am attempting to get by broadcom wifi card up and running, am sick of trying to get ndis working, and am attempting to use the bwi driver (originating in dragonflyBSD). I'm hoping others here have tried to do the same and have some pointers. I'm using 7.1-RELEASE (system/source are in-sync) and my card is a BCM94306MP. My dmesg is posted below. Bwi(4) is installed and it

Hi, I have a server (Dell PowerEdge SC1435, ServerWorks HT1000) on which I'd like to try installing FreeBSD. I've already failed to make 7.0 work on this box and was wondering if you have information about the behavior of the upcoming 7.1 on this hardware. I've been following the "HT1000 chipset errata saga" thread, and the commits by sos@ to CVS (around Jan 2008), but have

Hello everybody Unfortunately my problem still doesn't have any solution. But I have an interesting observation. The gateway freezes very quickly, if torrent client programs are running on workstations. I assume the cause of the problem consists in many number of TCP/IP connections that torrent client establishes. Any ideas? Maybe I can tune somehow a TCP/IP via kernel, sysctl or pf settings?

Hello all. I have a supermicro 16 bay box with a LSI 9211-8i card. We use it for temp data storage, and we wanted to try the l4z compression. After updating the source tree to r247839: and doing a make buildworld cycle all works fine. But at boot time we get some warnings. make_dev_physpath_alias: WARNING - Unable to alias gptid/281951f4-a996-11e1-83eb-00259061b51a to enc at

Hello Got strange problem with high system "%system load" and very slow user level programs (apache+php+mysql) behavior gstat shows 1.5-4% hard disk busy load but system shows about 20-30% load while user load is max 5%. vmstat shows from 2 to 35 process in "b" state. Now use 7.0-RELEASE-p5 , but the same problem was with 7.0-RELEASE. And have no idea what to do with this.

Hi, I was trying to rebuild world on a FreeBSD 10 test system, that I had just installed. ZFS root was setup. I let the installation program do all the ZFS setup and configuration. I put root on a 5 disk encrypted raidz array. Besides the installer configuring 5 times the amount of swap space I asked for (asked for 8gb, installer put 8gb on each drive, for 40gb in total.) everything was working

Hello! Has anyone gotten 4.9R to recognize the "ServerWorks CSB6" ATA controller on a Dell 600SC? How about installing 5.2R on a 600SC? 5.2R recognizes the said controller, but it corrupts data. -- eof

I just updated to RELENG_7 from 6.2 and I'm running into some really annoying issues with jerky mouse movement and skipping sound. This seems to be similar to: Re: SCHED_4BSD in RELENG_7 disturbs workflow This happens both with 4BSD and ULE. I seems to happen when I'm compiling ports and a new cc/bzip2/sh process fires off (I'm just watching top), I'll get the skip/freezeup.

Hello, freebsd-stable. Does somebody use some software RAID5 on FreeBSD in real production system? I want to build storage server for my home: RAW photos, multi-layer PhotoShop files and FLAC-encoded music consume a lot of space, and they should be availible both from desktop & notebook. Also, all photo-content is unique, so I need some insuranse from single HDD crash. I understand,

Hi, I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4. The problem is "-" appears on the screen and it never boots unless somebody hits the "Enter" key. Sometimes even PS2 keyboard doesn't respond during that time. Tried with USB keyboard, same problem. The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic (mpt-5.0.5.20.00 bios) LSI1030-IT

Hello, Before a couple of days ago I started /usr/local/sbin/cupsd manualy from console. When I press CTRL+C to interrupt a program, the system change runlevel and going to reboot. This was on FreeBSD V5.3, today I installed fresh new 5.4 but the problem is the same. cups-base-1.1.23.0_3 -- Todor Dragnev <todor.dragnev@gmail.com>

Hi, I have Orinoco 802.11b PC Card from Proxim. I plugged it to pcmcia slot, but It doesn't work - no blinking LEDs, no wi0 in ifconfig. I have 7.1-PRERELEASE, laptop Prestigio Nobile 157. On NetBSD seems working, but NetBSD is not friendly with me. if_wi driver included in kernel. ----- dmesg Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,

Hi all, I have had this problem since day 1 on my new server. It has run since November 15th 2008, and serve approx. 10 GB worth of web traffic per month for the main site and then some 40 domains with mail and small web pages. (hence - it's NOT that busy yet) I started with 7.1-RELEASE-pX since I didn't have problems straight off - but it didn't last long. After a few days of

I have a new system which includes a Plextor PX-740a DVD+-R/RW CD-R/RW drive attached to an Asus A8V-MX motherboard. When I try to use burncd to burn a cd, it writes all of the data, says "fixating CD, please wait.." and then reports burncd: ioctl(CDRIOCFIXATE): Input/output error Oddly enough, the CD seems to be usable. I can successfully burn the same file if I use cdrecord. The

Thanks for you reply. I have installed asciidoc with "pkg_add asciidoc" And it returns something: # asciidoc fgh asciidoc: FAILED: input file /root/nut/fgh missing # which asciidoc /usr/local/bin/asciidoc Maybe there is any way to skip building man pages. This is not the such main thing as a new devices support. I also could built the driver that I need # make riello_ser but I don't

Hello, My server is experiencing occasional kernel panics when under moderate load. I'm attaching a crash dump and the dmesg output. I'm not sure how to read the kernel backtrace but it looks like the Intel NIC (em0) caused the problem. Occasionally, I used to get a "em0: watchdog timeout -- resetting" error message, but I never had a kernel panic. The problem started last

Hello, I''m trying to compile Xen unstable on NetBSD, I''ve aplied the patches from http://cvsweb.netbsd.org/bsdweb.cgi/pkgsrc/sysutils/xentools41/patches/?only_with_tag=MAIN and copied the blk files from http://cvsweb.netbsd.org/bsdweb.cgi/pkgsrc/sysutils/xentools41/files/?only_with_tag=MAIN (I don''t know which of these patches have been applied to xen unstable, so

Here is what I did: # cd /root/nut/ # nut here it's checkouted repository # ./configure --with-user=_ups --with-group=_ups # cd drivers/ # make riello_ser # chgrp bin riello_ser # cp riello_ser /usr/local/bin # here I copied builder driver to folder where nut-package will store their files/drivers # pkg_add nut-2.6.5p1 # ls -la /dev/tty00 crw-rw---- 1 _ups _ups 8, 0 Jul 30

Hi, I am trying to get FreeBSD 4.7 to connect to a Maxtor 5000XT drive, but I get the following when connecting it -> Apr 26 09:19:43 chowder /kernel: fwohci0: node_id = 0xc000ffc1, CYCLEMASTER mode Apr 26 09:19:43 chowder /kernel: firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me) Apr 26 09:19:50 chowder /kernel: fwohci0: BUS reset Apr 26 09:19:50 chowder /kernel: fwohci0: node_id =

Hello, I have a server pfsense in bridge mode to function as transparent FW, the problem is that once I connect the pfsense between my router core and my core switch catalyst a few seconds begin to appear several messages like these: em2: watchdog timeout - resetting em2: watchdog timeout - resetting em2: watchdog timeout - resetting em2: watchdog timeout - resetting And the connection falls