similar to: Newer APC Back-UPS spurious events

Hello, I am not able to get NUT working with a APC SC1500. The ups has only a serial port and came with a 940-0272a serial to usb cable. The cable has a fake Prolific chip in it, so only works by downgrading the driver to version 3.2. I tested a 940-0024C cable without success as well. The ups works with powerchute and apcupsd with the 940-0272a cable. Have not tested it with the other one. OS:

Arnaud, I was finally able to get back to this issue and would recommend adding these items to the FAQ #37 about recalibrating the UPS: 1a. It's important that the UPS be at 100% charge before starting the procedure; starting at lower will not work at all, not just produce inaccurate numbers. ? ? ? [I started the procedure when the UPS was at 91% charge. After that it would never report

I need a little help on this problem, please? I include my /etc/apcupsd/apcupsd.conf file is attached. port 3551 udp/tcp has been added to the (running) firewall. My APC is recognized as: APC Back-UPS 450 FW:844.Kld.D USB FW:Kld This from the hardware browser. PS says: root 2419 0.0 0.0 4196 584 ? Ss Mar23 0:09 /sbin/apcupsd -f /etc/apcupsd/apcupsd.conf Is group 2419 the

Hello. We've got an APC Symmetra with a network management card. We'd like to run Powerchute Network Shutdown on some of our older Linux servers, but no dice. I'm wondering if anyone has found a way to make NUT work with the network mangement card (it's a TCP connection, not SNMP or cable), or knows of any alternate PCNS clients Also, I was wondering if anyone on the list has

On Dec 16, 2014, at 9:45 AM, Frantz de Germain <frantz at info.univ-angers.fr> wrote: > Bye the way I just realize that I can't retrieve the ups.load, among other > thing :-( To the best of my knowledge, Microlink is not supported by any third-party tools (including NUT), but some variables are exposed via standard USB HID. Apparently, ups.load is not one of them. Your UPS might

Le Tue, 16 Dec 2014 20:38:50 -0500 Charles Lepple <clepple at gmail.com> ?crivait: > On Dec 16, 2014, at 9:45 AM, Frantz de Germain <frantz at info.univ-angers.fr> wrote: > > > Bye the way I just realize that I can't retrieve the ups.load, among other > > thing :-( > > To the best of my knowledge, Microlink is not supported by any third-party tools

Hi, I run os x yosemite and found out about NUT tonight. I messed around with fink and macports but get stuck very soon. I dont know how to install anything that doesnt have a .dmg or .pkg installer. Does anyone have a step by step (written in "for dummies" format on how to get this all to work? Just looking for a PowerChute alternative that actually lets me control and monitor my

d tbsky <tbskyd at gmail.com> > > Laurent Taieb via Nut-upsuser > > > > Hello mailing List. > > > > I manage 2 UPS via NUT, an APC Smart-UPS_1500 and an EATON 5S 1500. > > > > I can get load information on the EATON but not on the APC. > > > > Actually upsc doesn?t give much information on the APC. > > > > Does someone know

Thanks d tbsky, Actually, my nut server is connected via usb. APC looks to be a very common UPS brand. I wonder whether there is another version of the usbhid server or another server for this UPS ? Laurent ?Le 25/05/2024 07:00, ? d tbsky ? <tbskyd at gmail.com <mailto:tbskyd at gmail.com>> a ?crit : d tbsky <tbskyd at gmail.com <mailto:tbskyd at gmail.com>> > >

Hi all, Thought I'd forward this on, as the apcsmart driver doesn't appear to have any support for this (admittedly obscure) setting and it doesn't seem to be listed at http://www.networkupstools.org/protocols/apcsmart.html. Hope someone finds it useful. Later, Russ -- Russell Odom http://www.gloomytrousers.co.uk/ Fast, cheap, good: pick two. -------- Original Message --------

'lo, UPS model: APC Back-UPS BR 800 (supplied by Dell) My USB connection: Bus 001 Device 002: ID 051d:0002 American Power Conversion Back-UPS Pro 500/1000/1500 # upsc desk@localhost|grep load ups.load: 0.0 This UPS has 2 pc's and some minor other gear connected, yet the load stays at 0.0 when checking with nut. driver.version: 2.0.5 driver.version.data: APC/CyberPower HID 0.9

I have a network with two older systems protected by APC UPSs. Both systems run OS/2 and will continue to do so. Both systems have APC PowerChute Plus 4.2.3 installed and I can use that software to monitor and control both systems. I am also now running several linux systems, in fact I spend almost all my time on the linux systems and these OS/2 systems are servers running in the

Hi Roger, Thank you for your advise. I tried driver = apcupsd port = auto But unfortunately I get the same error message ?Failed to execute command ?upsc 'ups' 2>&1': Error: Driver not connected" As I am not very good in using OMV, maybe there is something else I should do? Thanks Best regards mikael festa The Studio, Cornfields, Portsmouth Road, Ripley, Surrey GU23

Hello, i have this strange problem with APC BackUPS RS 1500 ? older one model, white one under windows in powerchute is device OK, working everything ok selftest ok, just ordinary ups. under CentOS 7 minimal (CentOS-7-x86_64-Minimal-1708.iso) kernel version 3.10.0-693.el7.x68_64 driver version 2.7.2 i have this strange probem: nut driver didnt start automatically with error, after i enter in

Hello, i have this strange problem with APC BackUPS RS 1500 ? older one model, white one under windows in powerchute is device OK, working everything ok selftest ok, just ordinary ups. under CentOS 7 minimal (CentOS-7-x86_64-Minimal-1708.iso) kernel version 3.10.0-693.el7.x68_64 driver version 2.7.2 i have this strange probem: nut driver didnt start automatically with error, after i enter in

Listmates, After wrangling with the voltage value on the CyberPower 1000AVRLCD and now having 2 of them working, I though it would be a simple matter to move my APC BP650 from apcupsd to nut so that all 3 servers would be monitored on the same web interface. The APC is attached to an older box running openSuSE 11.0 with nut-2.2.2-66.1. (nut-classic). The APC BP650 uses a serial connection

Hello Ted, 2013/9/11 Ted Mittelstaedt <tedm at mittelstaedt.us> > Hi All, > > About a month ago APC announced they were including MODBUS protocol > support in their new APC UPSes. The technical note on this is here: > > http://www.apcmedia.com/**salestools/MPAO-98KJ7F/MPAO-**98KJ7F_R0_EN.pdf<http://www.apcmedia.com/salestools/MPAO-98KJ7F/MPAO-98KJ7F_R0_EN.pdf>

Hi all, First of all, I would like to thank everyone who was involved in the development of NUT. Although it took me some time to set it up, now it appears to be working very well. Thanks for the good software! This is my success report for an APC Back-UPS RS 800: khali at mahadeva:~> upsc rs800 battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 2001/09/25

Folks, I've asked this question on the FreeNAS forum but there are no ideas there as it looks like it's a NUT issue. Original question: https://forums.freenas.org/index.php?threads/apc-ups-reporting-wrong-input-voltage.60888/ the nut driver is reporting the wrong input voltage. I am in the UK, 230V but it's reporting circa 108. If I connect it to the laptop and run powerchute it

Hi, ?Thank you for your prompt response! The problem I had with my BX950MI unit was that it was frequently reporting off-line, on batt and often not responding to requests from apcupsd (apcaccess) and then going back online again. However, the warranty replacement was prompted by a failed battery, apparently leaking acid, after around ten months use.? As a matter of interest, I had a