similar to: sio => uart: one port is gone

We are in the process of migrating one of our embedded apps to use uart by default instead of sio in RELENG_7 in prep for the day when sio eventually disappears. Unfortunately, the application doesnt want to work with uart with puc backed devices, but still works with sio. Stranger still, the app works with the uart driver when uart attaches to the built in com port on the isa bus. However,

Hi, I have a server (Dell PowerEdge SC1435, ServerWorks HT1000) on which I'd like to try installing FreeBSD. I've already failed to make 7.0 work on this box and was wondering if you have information about the behavior of the upcoming 7.1 on this hardware. I've been following the "HT1000 chipset errata saga" thread, and the commits by sos@ to CVS (around Jan 2008), but have

Hi, I'm having issues connecting Garmin GPS 18 to COM1 on 9.1, I get nothing but silence. Identical setup works absolutely fine with Linux. I've got PPS wire connected to DCD, but that seems to make no difference on Linux, so I presume it shouldn't affect fbsd either. On Linux, I get: $ uname -a Linux ubuntu 3.8.0-19-generic #29-Ubuntu SMP Wed Apr 17 18:16:28 UTC 2013 x86_64 x86_64

I have an amd64 7.1 install on a SuperMicro C2SBA+ and I see the following in dmesg.. sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: configured irq 3 not

Hello, I am attempting to get by broadcom wifi card up and running, am sick of trying to get ndis working, and am attempting to use the bwi driver (originating in dragonflyBSD). I'm hoping others here have tried to do the same and have some pointers. I'm using 7.1-RELEASE (system/source are in-sync) and my card is a BCM94306MP. My dmesg is posted below. Bwi(4) is installed and it

Hi all, I have some problems with my gvinum setup after the system panic'ed. Afterwards the system fails finding the plexes to the subdisks (or at least that is what I can understand after having searched the gvinum source code for the error string in the DMESG log..) The machine is an IBM Netfinity 5000 and the internal HW self tests does not find any errors in the hw. Luckily my root is

Hello everybody Unfortunately my problem still doesn't have any solution. But I have an interesting observation. The gateway freezes very quickly, if torrent client programs are running on workstations. I assume the cause of the problem consists in many number of TCP/IP connections that torrent client establishes. Any ideas? Maybe I can tune somehow a TCP/IP via kernel, sysctl or pf settings?

Hello! Has anyone gotten 4.9R to recognize the "ServerWorks CSB6" ATA controller on a Dell 600SC? How about installing 5.2R on a 600SC? 5.2R recognizes the said controller, but it corrupts data. -- eof

Hello, Before a couple of days ago I started /usr/local/sbin/cupsd manualy from console. When I press CTRL+C to interrupt a program, the system change runlevel and going to reboot. This was on FreeBSD V5.3, today I installed fresh new 5.4 but the problem is the same. cups-base-1.1.23.0_3 -- Todor Dragnev <todor.dragnev@gmail.com>

Hi all, A recent thread inspired me to try getting a proper serial console working on a Supermicro X9SCL motherboard with IPMI. However I find that while I see loader messages and the getty I enabled after boot I don't get any kernel messages which does somewhat limit the utility.. The BMC creates COM3 (/dev/cuau2) which works with getty. I modified /boot/loader.conf like so..

Hello Got strange problem with high system "%system load" and very slow user level programs (apache+php+mysql) behavior gstat shows 1.5-4% hard disk busy load but system shows about 20-30% load while user load is max 5%. vmstat shows from 2 to 35 process in "b" state. Now use 7.0-RELEASE-p5 , but the same problem was with 7.0-RELEASE. And have no idea what to do with this.

Hi, I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4. The problem is "-" appears on the screen and it never boots unless somebody hits the "Enter" key. Sometimes even PS2 keyboard doesn't respond during that time. Tried with USB keyboard, same problem. The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic (mpt-5.0.5.20.00 bios) LSI1030-IT

I have a new system which includes a Plextor PX-740a DVD+-R/RW CD-R/RW drive attached to an Asus A8V-MX motherboard. When I try to use burncd to burn a cd, it writes all of the data, says "fixating CD, please wait.." and then reports burncd: ioctl(CDRIOCFIXATE): Input/output error Oddly enough, the CD seems to be usable. I can successfully burn the same file if I use cdrecord. The

I can't seem to get my serial terminal to work with my new system. I had a serial terminal connected to my old system that worked great and copied /boot.config, /boot/loader.conf and /etc/ttys settings over from it. The new system has a Gigabyte GA970A-UD3 board with just a serial header on the board. I bought a serial connector backplate in an electronics store and connected it to the

I'm running FreeBSD 7.1-PRERELEASE over Asus P5Q motherboard. Such board comes with an nic requiring age0 driver. When the nic is under load, such trasferring big amount of data over gigabit connection (let's say some gigabyte backups), the computer hangs, sometimes with panic, sometimes freezing. Before that i was using an Intel nic with em0 driver and 7.0-Stable#2.. and that

Hello, I am having a problem with a new server running FreeBSD 4.9-PRERELEASE. Once every two days or so, it reboots itself.. there is no exact time of the day it reboots.. It rebooted itself at 4:25 PM EDT on 9/25, and 3:05 AM EDT on 9/29 (today). I thought it's the bad memory or some sort, so I've been running memtest today and memtest reports no sign of trouble with the memory...

Hi, I currently encounter spin lock 0xc0c83ba8 (sio) held by 0xc6337460 (tid 100005) too long panic: spin lock held too long cpuid=3 on hp server with two dual-core intel xeon (3.8GHz) and 3GB RAM. System is 7.1-PRELEASE last fetched 29.11.2008, 17:58 UTC. This happens with VSCom Card that was previously in use in a 5.3-STABLE system (also hp server, but older hardware) without problems. The

Hi, Can someone please help me with this? I have just upgraded from 4.7 to 4.8-STABLE and this is what I am getting when I try a tape backup. Please CC as I am not in the list. It was working well before the upgrade (dump -0ua -f - / | gzip -c -9 | dd of=/dev/nsa0). Thank you, Lefteris Tsintjelis Jul 3 22:55:18 ene /kernel:

Hi, Did anyone else experience this? With 9.1-BETA1 the boot process freezes, among the last lines with verbose boot are acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times after this, dead. What is supposed to happen in the next stage? This laptop worked fine with 9-STABLE to at least february. //per

On 4/8/06, Dmitry Morozovsky <marck@rinet.ru> wrote: > On Fri, 7 Apr 2006, Mars G. Miro wrote: > > MGM> Greetz! > MGM> > MGM> I have an HP DL145 that I'm having problems with when connecting via > MGM> serial console. I think it's acpi-related. This is on 6.1-BETA4/amd64 > MGM> (5.X is the same also) > > [snip] > > It seems it's