similar to: Dummy-ups cycles between online and onbatt every 5 minutes. (Nut 2.8.0)

I've built NUT 2.8.0 from source. When the nut-monitor runs: fopen upsmon.pid fails. I'm running as root, upsmon has root:root permissions as well as the other daemons and .conf files. I've tried configuring with and without --prefixpath --prefixaltpath. Is there something I am missing? Please see attached. Dan -------------- next part -------------- An HTML attachment was

NUT 2.8.01 When I pull the USB cable from the UPS, I get two notifications of the nocomm-timer expired. The first notification is in the proper sequence, the second notification occurs after 'commok' occurs. Seems somehow that upssched-cmd is getting a second nocomm-timer expired delayed. Dan -------------- next part -------------- An HTML attachment was scrubbed... URL:

I've not been able to connect to my ups using NUT 2.7.4 or NUT 2.8.0. 2.7.4 was installed as a package, 2.8.O was compiled from source. I've messed with permissons, everything is root:root and has the approprate read/execute permissons. I've tried two differnt UPS(es) APC & CyperPower. I'm running PI OS (Raspbian) on a Raspberry Pi3 model B. The port 3493 is open (UFW). I can

Hi, I have been running nut successfully for a long time with my Debian 11 server. I upgraded my server to Debian 12 today, which upgraded nut also from 2.7.4-13 to 2.8.0-7. I noticed that after upgrade there was a upssched process running and taking 100% cpu time. I checked if there were any changes to configuration file formats with nut upgrade and only differences I noticed were a terminology

Hi, I ran the strace command while upssched was 100% CPU hungry. This is what I got: 1686633611.702798 read(7, "", 1) = 0 <0.000004> 1686633611.702816 read(7, "", 1) = 0 <0.000004> 1686633611.702834 pselect6(11, [7 10], NULL, NULL, {tv_sec=1, tv_nsec=0}, NULL) = 1 (in [7], left {tv_sec=0, tv_nsec=999998800}) <0.000006> 1686633611.702862 read(7,

Hi, I ran the strace command while upssched was 100% CPU hungry. This is what I got: 1686633611.702798 read(7, "", 1) = 0 <0.000004> 1686633611.702816 read(7, "", 1) = 0 <0.000004> 1686633611.702834 pselect6(11, [7 10], NULL, NULL, {tv_sec=1, tv_nsec=0}, NULL) = 1 (in [7], left {tv_sec=0, tv_nsec=999998800}) <0.000006> 1686633611.702862 read(7,

Hi list, I use ssh a lot and I often need to connect to hosts whose host key has changed. If a host key of the remote host changes ssh terminates and the user has to manually delete the offending host key from known_hosts. I had to do this so many times that I no longer like the idea ;-) I would really like ssh to ask me if the new host key is OK and if I want to add it to known_hosts. I talked

The attached patch implements a feature that would make my interaction with ssh somewhat more secure. When connecting to a host whose key is not in the known_hosts file, this patch makes ssh tell the user about any other hosts in the known_hosts file that have the same key. For example, if I have host A in my known_hosts file, and try to connect to host B which is an alias for A, ssh will tell

On Tue, 27 Oct 2015, George Anchev wrote: > Yes, that was the power off test. However the upssched-cmd script gave > absolutely no signs of activity. Even it's logger lines don't show up in > journalctl. No any permission error messages - nothing. Only the 2 > messages from upsmon - on battery and then on line power. > > Here is the nut-report: >

Hello guys Yesterday i started do configure my Mustek Powermust650 with nut using the megatec_usb driver. Everything works fine except for the mailing when something happens. My upsmon looks like this: MONITOR powermust650 at localhost 1 local controller master MINSUPPLIES 1 SHUTDOWNCMD "/sbin/shutdown -h +0" NOTIFYCMD /root/upsmailer POLLFREQ 10 POLLFREQALERT 5 HOSTSYNC 15

Charles, This is how I have the upsmon.conf set up. ?The only time I get a message is if the?NUT Monitor gui is running. ?I open LXterminal, pull the wall plug, and I get no messagesin the terminal. ?MONITOR Asium_p700 at localhost 1 upsmon jsamcr master?MINSUPPLIES 1?SHUTDOWNCMD "/sbin/shutdown -h +0"?NOTIFYCMD /sbin/upssched?POLLFREQ 5?POLLFREQALERT 5?HOSTSYNC 15?DEADTIME

Hi, I have problem with upssched on windows. Upssched is not executed. I have 2 scripts, 1 for notification in upsmon and second for scheduling in upssched. Monitoring is working fine, script write to log. I'm using binary windows installer 2.6.5-6 from NUT. Here are my configs: --- nut.conf MODE=netclient --- upsmon.conf MONITOR ups_1000 at 192.168.3.95 1 <user> <password> slave

On 19.02.24 14:48, Dan Grostick via Nut-upsuser wrote: >Msmtp is not sending messages when invoked from upssched-cmd. >I can manually invoke it from the command line. where is its config file? >There is a 's' instead of an 'x' in the ls -l. Might this be some sort of >permission problem? Should not be the case. >upsmon.conf has run user as root. msmtp may use

There's supposedly another way with a custom upsmon.conf: NOTIFYMSG type message upsmon comes with a set of stock messages for various events. You can change them if you like. NOTIFYMSG ONLINE "UPS %s is getting line power" NOTIFYMSG ONBATT "Someone pulled the plug on %s" Note that %s is replaced with the identifier of the UPS in question. The message must be one

Hello, I set up a FreeBSD 8.2 system with nut 2.6.1 and a Powerware 5115 connected by RS-232. I expected this setup to shut down before running out of battery power, but I either missed some important configuration or something else went wrong: The syslog says: Jan 9 05:03:42 b1 upsmon[67752]: UPS upsb1 at localhost on battery Jan 9 05:04:42 b1 upsmon[67752]: UPS upsb1 at localhost on line

Hi folks, I'm having an issue with getting nut-server to start at boot on a freshly installed Fedora 40 desktop. Seems once the machine is up, I can manually start with systemctl start nut-server and everythings fine. dnf info nut Last metadata expiration check: 2:08:11 ago on Sat 27 Jul 2024 03:48:13 PM EDT. Installed Packages Name : nut Version : 2.8.2 Release : 1.fc40

MASTER SYSTEM nut.conf MODE=netserver ups.conf [TOPAPC] driver = usbhid-ups port = auto pollonly serial = "IS1309002707" desc = "TOPAPC" [MIDAPC] driver = usbhid-ups port = auto pollonly serial = "IS1309001233" desc = "MIDAPC" [BOTAPC] driver = usbhid-ups port = auto

On Fri, 9 Jun 2017, Robbie van der Walle wrote: > # NOTIFYMSG - change messages sent by upsmon when certain events occur > # > # You can change the default messages to something else if you like. > # > # NOTIFYMSG <notify type> "message" > # > # NOTIFYMSG ONLINE "UPS %s on line power" > # NOTIFYMSG ONBATT "UPS %s on battery" > #

Hi Everyone, I recently bought a Tripp-Lite SMART1500LCD for my Linux Mint 19.3 machine, connected via a USB cable. I installed Nut 2.7.4 from the Mint package repository via sudo apt update && sudo apt install nut. Everything works great: NUT issues low battery warning when it reaches the set low battery point and then issues shutdown commands...computer shuts down..then the UPS shuts