similar to: Zfs with storedge 6130

Hi I managed to get my Sun NAS filer to join my Samba domain (2.2.10). However, I cannot mount any of the shares from the NAS to a PC in the same domain, getting an error : 06/21/05 14:15:53 NetrSamLogon[BIOSS\janet]: SAMBA ACCESS_DENIED (Samba PDC) When I asked Sun about it they responded : "Further reseach has shown that a connection to SAMBA domain controller as is not supported by the

Hi, to shorten the story, I describe the situation. I have 4 disks in a zfs/svm config: c2t9d0 9G c2t10d0 9G c2t11d0 18G c2t12d0 18G c2t11d0 is devided in two: selecting c2t11d0 [disk formatted] /dev/dsk/c2t11d0s0 is in use by zpool storedge. Please see zpool(1M). /dev/dsk/c2t11d0s1 is part of SVM volume stripe:d11. Please see metaclear(1M). /dev/dsk/c2t11d0s2 is in use by zpool storedge. Please

On a V240 running s10u4 (no additional patches), I had a pool which looked like this: <pre> > # zpool status > pool: pool01 > state: ONLINE > scrub: none requested > config: > > NAME STATE READ WRITE CKSUM > pool01 ONLINE 0 0 0 > mirror

I am trying to use Xen with a Sun StorEdge 6130 disk array, but there are some IBM TotalStorage arrays that use the same RDAC driver, so hopefully someone has run across this. The driver will not compile with Xen and newer 2.6 sources/gcc4. At first there are some invalid lvalue assignments to clean up, and a few places where static declarations need to be removed, but I finally get to a point

how does one free segment(offset=77984887808 size=66560) on a pool that won''t import? looks like I found http://bugs.opensolaris.org/view_bug.do?bug_id=6580715 http://mail.opensolaris.org/pipermail/zfs-discuss/2007-September/042541.html when I luupgrade a ufs partition with a dvd-b62 that was bfu to b68 with a dvd of b74 it booted fine and I was doing the same thing that I had done on

So i''ve inherited this solaris 10 system with a sun storedge attached. pool: tol-pool state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM tol-pool ONLINE 0 0 0 raidz1 ONLINE 0 0 0 c1t8d0 ONLINE 0 0 0 c1t9d0 ONLINE 0 0 0

Hi sorry if this is the wrong place to post but I'm not sure where to go to and I'm a bit desperate. We just brought our Sunfire 6800 server and Storedge 9960 RAID array Solaris 8 back up after some maintenance and everything came back up 'clean' but I cannot get our SAMBA software to recognise any users or directories when logging in remotely from an apple or windows box.

Hi I have a Panasonic TDA600 conected with one E1 to the pstn and one PRI with my Asterisk using a Digium TE220B card. The Panasonic is master clock and Asterisk is slave, additionally the Panasonic takes the clock from the PSTN E1. This scheme works and I?m able to make and receive calls the problem is that some times the Asterisk lose the synchronism with the Panasonic and the log shows this

On 11/3/2017 1:31 AM, hw wrote: >> 2.5" SAS drives spinning at 10k and 15k RPM are the performance >> solution for online storage, like databases and so forth.?? also make >> more sense for large arrays of SSDs, as they don't even come in >> 3.5".??? With 2.5" you can pack more disks per U (24-25 2.5" per 2U >> face, vs 12 3.5" max per

Hello, I received the following question from a company I am working with: We are having issues with our early experiments with ZFS with volumes mounted from a 6130. Here is what we have and what we are seeing: T2000 (geronimo) on the fibre with a 6130. 6130 configured with UFS volumes mapped and mounted on several other hosts. it''s the only host using ZFS volume (only

Hi, I work on a support team for the Sun StorEdge 6920 and have a question about the use of the SCSI sync cache command in Solaris and ZFS. We have a bug in our 6920 software that exposes us to a memory leak when we receive the SCSI sync cache command: 6456312 - SCSI Synchronize Cache Command is flawed It will take some time for this bug fix to role out to the field so we need to understand

On 2/3/2015 10:00 AM, John R Pierce wrote: > On 2/2/2015 8:11 PM, Jatin Davey wrote: >> disk 252:1 | 0-0-0 | 9XG7TNQVST91000640NS CC03 | Online, Spun Up >> disk 252:2 | 0-0-1 | 9XG4M4X3ST91000640NS CC03 | Online, Spun Up >> disk 252:3 | 0-1-1 | 9XG4LY7JST91000640NS CC03 | Online, Spun Up >> disk 252:4 | 0-1-0 | 9XG51233ST91000640NS CC03 | Online, Spun Up >> End of

On 2/2/2015 8:11 PM, Jatin Davey wrote: > disk 252:1 | 0-0-0 | 9XG7TNQVST91000640NS CC03 | Online, Spun Up > disk 252:2 | 0-0-1 | 9XG4M4X3ST91000640NS CC03 | Online, Spun Up > disk 252:3 | 0-1-1 | 9XG4LY7JST91000640NS CC03 | Online, Spun Up > disk 252:4 | 0-1-0 | 9XG51233ST91000640NS CC03 | Online, Spun Up > End of Output ************************** > > Let me know if i need to

I?d like to report the ZFS related crash/bug described below. How do I go about reporting the crash and what additional information is needed? I?m using my own very simple test app that creates numerous directories and files of randomly generated data. I have run the test app on two machines, both 64 bit. OpenSolaris crashes a few minutes after starting my test app. The crash has occurred on

I have a question about what is going on at line 754 of SimpleRegisterCoalescing.cpp. The comment says we are updating the live intervals for subregisters. This happens when we coalesce to a physical register. Now, I read that as, "merge in the range information from the eliminated live interval to the subregister live interval," but that appears to not be what happens. In my case,

Hi Everyone - I have webvmail up and running, I can see the messages, forward them, pretty much everything but listen to them. Here is what I see in my logs: 192.168.0.1 - - [25/Feb/2005:08:15:40 -0800] "GET /vmail/vmail.cgi?action=audio&folder=INBOX&mailbox=2377&context=default &password=000012&msgid=0000&format=gsm&dontcasheme=4624.gsm HTTP/1.1" 200 9438

Hi everyone , I'am new using Linux and SAMBA, so I hope you can help me to solve this problem : I have installed a SAMBA Server, I have created users and I can log in to the server, nevertheless, everytime I access the server, I lose my local Windows profile (I use the "same user and password"). What should I do to access my SAMBA server without losing my local windows

On 11/2/2017 9:21 AM, hw wrote: > Richard Zimmerman wrote: >> hw wrote: >>> Next question: you want RAID, how much storage do you need? Will 4 >>> or 8 3.5" drives be enough (DO NOT GET crappy 2.5" drives - they're >>> *much* more expensive than the 3.5" drives, and >smaller disk space. >>> For the price of a 1TB 2.5", I

John R Pierce wrote: > On 11/2/2017 9:21 AM, hw wrote: >> Richard Zimmerman wrote: >>> hw wrote: >>>> Next question: you want RAID, how much storage do you need? Will 4 >>>> or 8 3.5" drives be enough (DO NOT GET crappy 2.5" drives - they're >>>> *much* more expensive than the 3.5" drives, and >smaller disk space.

Hi, I may have lost my first zpool, due to ... well, we''re not yet sure. The ''zpool import tank'' causes a panic -- one which I''m not even able to capture via savecore. I''m glad this happened when it did. At home I am in the process of moving all my data from a Linux NFS server to OpenSolaris. It''s something I''d been meaning to do