similar to: Force SATA1 on AOC-SAT2-MV8

Hi all, I''m getting a very strange problem with a recent OpenSolaris b134 install. System is: Supermicro X5DP8-G2 BIOS 1.6a 2x Supermicro AOC-SAT2-MV8 1.0b 11 Seagate Barracuda 1TB ES.2 ST31000340NS drives If I have any of the 11 1TB Seagate drives plugged into the controller, the AOC-SAT2-MV8 BIOS appears to detect them just fine, but I get the following problems: 1. Grub takes a

I''ve been trying to get either smartctl or sg3_utils to report properly. They both have the same low-level problems which leads me to suspect either I''m doing something wrong OR there is a problem in the marvell88sx / sd / SATA etc framework. I can access drive name/serial number of all drives on the SAT2 card and the temperature is returned from the IE log page on my two

Bouncing a thread from the device drivers list: http://opensolaris.org/jive/thread.jspa?messageID=357176 Does anybody know if OpenSolaris will support this new Supermicro card, based on the Marvell 88SE6480 chipset? It''s a true PCI Express 8 port JBOD SAS/SATA controller with pricing apparently around $125. If it works with OpenSolaris it sounds pretty much perfect. --------------

On Wed, Jul 9, 2008 at 1:12 PM, Tim <tim at tcsac.net> wrote: > Perfect. Which means good ol'' supermicro would come through :) WOHOO! > > AOC-USAS-L8i > > http://www.supermicro.com/products/accessories/addon/AOC-USAS-L8i.cfm Is this card new? I''m not finding it at the usual places like Newegg, etc. It looks like the LSI SAS3081E-R, but probably at 1/2 the

My test setup of 8 x 2G virtual disks under Virtual Box on top of Mac OS X is running nicely! I haven''t lost a *single* byte of data. ;) A. -- Adam Sherman CTO, Versature Corp. Tel: +1.877.498.3772 x113

I posted a thread here... http://forums.opensolaris.com/thread.jspa?threadID=596 I am trying to finish building a system and I kind of need to pick working NIC and onboard SATA chipsets (video is not a big deal - I can get a silent PCIe card for that, I already know one which works great) I need 8 onboard SATA. I would prefer Intel CPU. At least one gigabit port. That''s about it. I

Hi all, Space is starting to get a bit tight here, so I''m looking at adding a couple of TB to my home server. I''m considering external USB or FireWire attached drive enclosures. Cost is a real issue, but I also want the data to be managed by ZFS--so enclosures without a JBOD option have been disgarded (i.e., I don''t want to use any internal HW RAID controllers). One

Hi all, Sorry for the offtopic question. I hope though that others on this list or reading the archive find the answers useful too. It seems the Adaptec 1405 4port SAS HBA I bought only works with RHEL and SuSE through a closed source driver, and thus is quite useless :-( I was stupid enought to think "Works with RHEL and SuSE" meant "Certified for RHEL and SuSE, but driver in

Hi, I'm having a grief with Seagate FreeAgent Pro drive connected to CentOS 4 box via USB. The problem is that drive is factory configured to take a nap (spin down) after some 15-20 minutes of inactivity, and there doesn't seem to be a way to disable it. Since it's USB connected, hdparm can't be used on it. Getting the drive out of the case is not an option either, since it

Hi guys, I have a quick question, I am playing around with ZFS and here''s what I did. I created a storage pool with several drives. I unplugged 3 out of 5 drives from the array, currently: NAME STATE READ WRITE CKSUM gpool UNAVAIL 0 0 0 insufficient replicas raidz1 UNAVAIL 0 0 0 insufficient replicas c8t2d0 UNAVAIL 0 0

Hello, is there someone who knows if I can use AOC for billing in Asterisk? I mean: let's say I have an external SIP device that produces AOC data. This device connects me to the telco network. Can Asterisk, if connected via SIP with this device, collect AOC data and put it in the CDR records? If not, which is the right way to use AOC for billing? Thanks a lot Stefano Corsi -- Stefano

> Hello everyone, > > I am trying to find out whether AOC (any of the 3 types) is currently supported by Asterisk and for which hardware combination. > > Does anyone know if? AOC info can be used in the CDR when the interface to the outside world is ISDN BRI (not pri) and the internal counterpart is an analog extension (dahdi, i guess)? What about sip or iax? > > I have found

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I'd like to know what is the current situation with regard to AOC-E, when Asterisk is inserted between the telco and an existing PBX, using E1 / EuroISDN. Can Asterisk pass the AOC-E information received from the telco to the PBX, so that billing system still works? The system would be for a hotel, so breaking billing system is not possible.

hi all, I'm trying to send text messages to Snom 300 to show the credit remaining during the call... Sending a MESSAGE directly to the phone via udp i'm able to update the text on the display... but not during the conversation. I read about AOC, but i can't find any documentation about Asterisk + SIP + AOC Have you any experience, docs or workaround to suggest? Thx Ale

I am helping a friend who is build a storage server for his company and I have advocated for Solaris and ZFS. But now we are having trouble to find any good SATA controller for 12+ disks, there are Areca cards, but they seems very flaky (24 port support, but hangs with more than 12 in JBOD mode, hangs on disk failures etc). The AOC-SAT2-MV8,AOC-USAS-L8i have been mentioned, but it had

Hi, i can see AOC messages on the asterisk console. Can i sendtext() them to the caller or put them in cdr? Regards, Andreas. _________________________________________________________________ Need a new job? Check out XtraMSN Careers http://xtramsn.co.nz/careers

My Asterisk PBX is connected to 2 ISDN lines by a PATTON gateway, in the Patton specification is written that can manage the AOC message. I would like record the AOC value on the mysql's CDR table, so to record the call costs. Is there some one who has manage this issues and can give me help to configure the patton and Asterisk? Many thanks in advance

Hi all, As a disclaimer, I'm new to this list and very green administering CentOS. I run it on my test servers and do very basic networking and server administration (most users, permissions, and web app stuff). I have a backup server that I am using rsync to collect important in-process file for our digital library from both Windows and Linux servers, as well as a specific applications

Hi list I am running out of space on my notebook. So wanna buy additional and external storage. I don't wanna do a DIY-work, so searching for pre-built external hard disks. I wish to buy Seagate FreeAgent Pro [0]. Does it work under CentOS 5? Would you recommend me even better products? I am searching for good performance, noise-less, smart standard support and no useless features like

Does Asterisk support Advice of Charge? I was told that my Telco sends me billing signalization that way, and I wonder can I use it? -- Tomislav Parcina ime.prezime@email.t-com.hr