similar to: modules.cgz

i'm running on vmware system and HP proliant DL360 G5 servers on wmware, on boot i have the following message: ----------------------------- Applying Intel Microcode update: don't know to make device "cpu/microcode" [OK] ----------------------------- and on a HP proliant DL360 G5 server , on boot i have too the following message: ----------------------------- Applying

It's possible to mount cdrom in rescue mode ? because with centos 4.4 in linux rescue mode, the device "cdrom" doesn't exist -- Denis MACHARD dmachard at fr.netcentrex.net denis.machard at enst-bretagne.fr -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi folks, I've just finished rsyncing/downloading/jigdoizing the entire i386/x86_64 CentOS 4.2 distribution. If anyone is interested go to http://mirror.tcs.ii.uj.edu.pl/jigdo/ You'll need to edit the .jigdo file by hand to change the server section [Servers] CentOS42=file:/opt/mirrors/centos/4.2/ to point to a local mirror (file, http or ftp), ie. to use kernel.org: [Servers]

Hi, I try to mount the file /boot/initrd-2.6.9-42.ELsmp but I have a error [root at localhost ~]# cp /boot/initrd-2.6.9-42.ELsmp.img /root/ [root at localhost ~]# mv initrd-2.6.9-42.ELsmp.img initrd-2.6.9-42.ELsmp.gz [root at localhost ~]# gunzip initrd-2.6.9-42.ELsmp.gz [root at localhost ~]# mount initrd-2.6.9-42.ELsmp /tmp -o loop [root at localhost ~]# mount: you must specify the

Hi, I have built a Red Hat 7.2 system kernel 2.4.7-10 using pxelinux from syslinux-2.09 I have then installed the latest Broadcom BCM5700 Linux Driver Version 7.1.22 as per the README.TXT:- rpm -ivh bcm5700-7.1.22-1.src.rpm cd /usr/src/redhat rpm -bb SPECS/bcm5700.spec rpm -ivh --force RPMS/i386/bcm5700-7.1.22-1.i386.rpm The system reboots fine and is using the new driver I now want to update my

I'm trying to setup a kickstart server that will use ftp. I created a user account and put the ISO images in /home/centos. I created a directory /home/centos/disc1 and mounted the first ISO image there. When I try to do the ftp install I keep getting an error "Unable to retrieve ftp://my.ftpserver.com//home/centos/disc1/CentOS/base/netstg2.img" I tried different versions of the

Greetings, We have purchased an IBM BladeCenter and I am in the process of testing Linux installation on these things (boot off SAN i.e. qla2300 driver, not using internal drives). My distro of choice is Debian, however, since I'm really not interested in trying to hand compile all the drivers, I decided to try CentOS (which I'm so far very impressed with). On boot, as with the

We have a cluster (212 nodes) that are on a gig-e network useing jumbo frames (mtu 6000) To reload a node we have to plug it into a regular 1500 mtu that is running off a differnt port on the head node to install. Is there a way to tell in the 'append' line of /pxelinux.cfg/default to have the bcm5700 module run wiht jumbo frames. this is our append right now append load_ramdisk=1

Hi Brock, I'm trying set full duplex on a server that is being pxeboot/provisioned via autoyast. We want to ensure the duplex is full DURING the autoyast provisioning itself. I've played the syslinux configs to specify the bcm5600 driver, but was having trouble with setting the network options. I've tryed appending them as well, but nothing on the internet seems to indicate that

My goal is to be able to install to the drive array on the 3Ware controller card. 3Ware does provide a RH WS 3 driver that I've tried to use; however, the RH Enterprise 3 WS driver doesn't work since that kernel is older than the CentOS-3.1 install kernel. I'm trying to create a centOS-3.1 installation driver disk for the 3ware 9500S card; however, I'm not having much luck.

I'm running RHEL/CentOS 3 (2.4.21-47.ELsmp) with Broadcom NIC and BASP bonding (bcm5700 v8.1.55) When network traffic is ~12MB/sec (== ~120K packets/sec) CPU system load is growing up to 50-60%%. Yes, I know, that small packets (~100 bytes/packet) are not optimal for network throughput, but in the short-middle term I cannot re-write our application. Are there any network driver / kernel

Hi... I have a strange problem with my Private NIC Channel, here is my environment details : 1. RHAS 2.1 with kernel 2.4.9-e.27 Enterprise 2. OCFS version : 2.4.9-e-enterprise-1.0.9-6 3. Oracle RDBMS : 9.2.0.4 RAC with 5 Nodes 4. Private NIC Channel: Broadcom BCM5700 My Private NIC channel is down intermittently, we just tracing the root of the problems by identify each product installed the

I'm new to the ISOLINUX development cycle, and I've tried a few times to come up with a solution. I'm trying to recompile isolinux.bin to look for the config files in a directory other than root, /boot/isolinux, or /isolinux. Ideally, this directory would be /lpc/isolinux. I've tried changing the plain text values in isolinux.asm to reflect these changes and recompiling using

I will install CentOS 4.3 and downloaded the driver disk from Dell for RedHat Enterprise Linux 4: Description: Dell PowerEdge RAID Controller 5 Device Driver for Red Hat Enterprise Linux 4.0, X86 & X86_64 I saw a few minutes ago that the driver disk is extracted within /tmp/ramfs/DD-01. Therfore I know that the network is working correct. I will try to extract the module and insmod/modprobe

I'm trying to add XFS and ReiserFS to CentOS, integrating with Kickstart. I think I'm fairly close. I've added xfs.ko and reiserfs.ko to modules.cgz in initrd. Several of my partitions now specify --fstype=xfs. I can see tty5 mkfs.xfs is creating the XFS file systems. The system currently installs completely via kickstart, but it does not mount the XFS file systems while in the

Greetings! I am currently building a PXE distro server for a company that I'm contracting for, but I'm having some problems. Here's the scoop: Some of the clients I want to install on are Angstrom blades with Intel e1000 NICs. Using the pxelinux.0 file on the FC6 distro, I can install FC6 just fine. However, FC4 bombs. The system pulls it's DHCP address just fine, and then

On 2014?03?07? 23:05, Ady wrote: > I understand that these remarks might seem not the main issue, but I > tend to think that once you are successful while using only "default" > > values and in a minimalistic case, you could add complexity > (different paths, multiple firmwares, additional kernels, multiple > cfg files...). Ady, Thanks. I will follow your advice to

Hi, to install current PC models (with new Intel NICs) via Kickstart/PXE, I wanted to add the newest e1000e-Treiber to initrd.img. With this modified image, the Kickstart kernel crashes with the following error messages: [...] md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 RAMDISK: incomplete write (20480 != 32768) 6062080

Hi all, I've got a Centos 5.1 kickstart that I must continue to use. How can I update the kick start image so that it recognizes Intel gigabit 82576 nic? BTW, I compiled the driver I need and have this igb.ko file. How do I incorporate that into my initrd.img file that I see on the kickstart CD that is probably my kickstart boot OS. Thank you very much in advance. aurf -

I would like to know why the version of openssh used in Centos4.4 is based on version 3.9p1 but not on a more recent version of openssh? The vulnerabilities found and corrected in the last version of openssh are also corrected in version 3.9? -------------- next part -------------- An HTML attachment was scrubbed... URL: