similar to: Problem with CentOS 5.1/xen/RTL8110

Hello: I'm having issues with my CentOS 5.1/Xen installation. If I run the xen-bridge, I seem to get flaky ethernet. By flaky I mean everything seems fine from the host machine, but if I attempt to contact the host machine from another remote machine (eg. my laptop which is on the same subnet as the xen machine, separated by 10 ft of cable and a router) I either get extremely high ping

I'd like to add a page for the Realtek r1000 NIC driver for the RTL8110SC (and others) chipset. This driver is not included in the kernel. I've previously posted to the general mail list: http://lists.centos.org/pipermail/centos/2007-February/075383.html I'm guessing this would go in the HardwareList section. Otherwise a page titled 'Realtek r1000 Driver' would work. my

Executive Summary: Realtek has an r1000 driver for the rtl8110sc NIC at http://www.realtek.com.tw/downloads I've posted this in the forums but it looks like all the action for CentOS really happens here on the mailing list. Plus I hope this might help some other lost soul since google failed to connect this motherboard to *any* mention of the r1000. I thought I found a great little

Bill, your CentOS 5 RTL8110 page should probably be updated. I've confirmed that there's a newer r8169 driver in the kernel that works with the RTL8110. RealTek's web site now carries the new r8169 instead of the r1000. The newer driver fixed a problem I was having on one host so we should probably recommend it over the older r1000. I've updated my CentOS 4 page. Kirk Bocek

Remote box SNV93 (xVM kernel) 192.168.1.54 (NIC RTL8169) Attempts of ssh connection from CentOS 5.1 DomU 192.168.1.37 at SNV93 Dom0 (NIC RTL8110SC) # ssh user1@192.168.1.54 hangs .. TCPDUMP running on remote box (192.168.1.54) # tcdump -s 1600 -vv One entry generates for each ssh connection attempt. First:- 17:12:43.058821 IP (tos 0x0, ttl 64, id 19771, offset 0, flags [DF], proto TCP (6),

Hi, After updating from 7.0-RELEASE to STABLE (around 15/08) my NIC refuses to handle large file transfers. pciconf -lv re0@pci0:4:0:0: class=0x020000 card=0x001a6409 chip=0x816910ec rev=0x10 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8110SB Single-Chip Gigabit LOM Ethernet Controller' class = network subclass = ethernet Log

Could I get write access to http://wiki.centos.org/HardwareList/CentOS5/RealTek/r1000? There's a couple of things I'd like to copy over from my CentOS4 R1000 page. Wiki Name: kirkbocek Thanks, Kirk Bocek

So I am trying to get back to finding the error in gmax, and I have to reinstall it because of the new machine and all. So I tried just putting it in after downloading it from TurboSquid. It complained about MSI having a major error, and quit, leaving me with a partial install. I got a panel suggesting this might be a problem with wine. So I used winetricks to install msi2. Failed again:

What is the difference between these two fragments (taken from two different tblgen record dumps)? dag OutOperandList = (outs GPR:$rd); dag OutOperandList = (outs R2); The first is from the RISCV backend record dump. There will be a substitution at some point for $rd. In the second, I'm specifying R2, no substitution necessary. If I specify GPR64:R2 or i64:R2 in my Instruction def,

UBUNTU 10.10 x86_64 with wine 1.3.10 I called winecfg, got the gui and set the decor to win7. Clicked on Apply and started moving through the tabs to check. When I clicked on the graphics tab I got this page fault. Here is my complete console log. john at john-GA-MA78LM-S2H:~$ mv .wine .wine.prod john at john-GA-MA78LM-S2H:~$ wine winecfg wine: created the configuration directory

Hi - I have a machine which was originally built with Centos 5.0 including xen. It has all the current updates and here are some questions: The current problem is: 1) If I boot the non-xen kernel - it runs fine. If I boot the xen kernel - it boots - but has no network connectivity - and I get the following errors continuously in the messages log: Time/date: C5 Kernel: vif0.0: received packet

Hi, I would like to do a network install using PIXES boot, however the ethernet device was not supported by centos installation (RTL8110SC). How do i add this module into the initrd? I know i can use: mkinitrd --with=r8169 `uname -r`, but i did not know what is the standard modules included in the installation initrd of Centos. Thanks! --beast

Hi, my btrfs "hangs" when doing a balance operation. I''m using a 3.7.1 kernel from opensuse: linux-opzz 3.7.1-2.10-m4 #11 SMP PREEMPT Fri Jan 11 18:04:04 CET 2013 x86_64 x86_64 x86_64 GNU/Linux and Btrfs v0.19+ I did a scrub which completed without errors. Then I tried "btrfs filesystem balance /" which work fine for the first 23 of 46 chunks, then ist stopped

Hi everyone, My PC don't have an integrated WLAN card, so I bought an USB WIFI device which use the MediaTek MT7601U chip(image 'dongle.jpg'). ------------------------------------------------------------------------------------------------------ My PC specification- OS = CentOS 7.8.2003. Processor = AMD Ryzen 5 1600. Mother-Board = GA-Gigabyte A320M-S2H

Hello I've just been hit by one of the chipsets described at http://wiki.centos.org/HardwareList/RealTekRTL8111b. Because a) it does not work with the stock driver included in Centos 5.1 and b) I am very lazy and I do not like manually compiling modules each time a new kernel is installed (not to mention that I never forget anything, except for the important things which always go

john at john-GA-MA78LM-S2H:~$ winetricks Executing wine /home/john/.cache/winetricks/jet40sp8_9xnt.exe fixme:setupapi:extract_cabinet_file awful hack: extracting cabinet "C:\\users\\john\\Temp\\IXP001.TMP\\Jetsetup.CAB" err:ole:TLB_ReadTypeLib Loading of typelib L"C:\\Program files\\Common files\\Microsoft shared\\dao\\dao2535.tlb" failed with [u][b]error 2[/b][/u] Install of

Howdy, It appears that CentOS 5.2's support for the RTL8111B/C chip is incomplete. The wiki has some blanket statements regarding this support: http://wiki.centos.org/AdditionalResources/HardwareList/CentOS5/RealTek/r1000 http://wiki.centos.org/AdditionalResources/HardwareList/RealTekRTL8111b I could dive in an make the changes *I* think need to happen but I'd like to talk to people

On Tue, 2007-09-04 at 23:32 +0100, Karanbir Singh wrote: > Hi, > > Phil Schaffner wrote: > > Karanbir provided driver disk images and indicated that kmod drivers > > would be in CentOS-5 Extras, but apparently these never materialized. > > The only src.rpm I could turn up was the last link above, and I did get > > CentOS-5 x86_64 kmod-style drivers to build from

> /lib32/libdbus-1.so > /lib32/libdbus-1.so.3 > /lib32/libdbus-1.so.3.5.2 So 10.10 has version 3.5.2 which is installed as /lib32/libdbus-1.so.3.5.2 and - in addition - linked as /lib32/libdbus-1.so.3 and /lib32/libdbus-1.so > > Code: > root at john-GA-MA78LM-S2H:/usr/lib32# ls libdbus* > libdbus-glib-1.so libdbus-glib-1.so.2 libdbus-glib-1.so.2.1.0 > > > Ahem

Hello, I've installed Asterisk and Asterisk GUI 2.0. The GUI says "No Analog Card found" and /etc/asterisk/ztscan.conf is empty. I see the following message from asterisk, <snip> -- Executing [executecommand at asterisk_guitools:1] System("Local/executecommand at asterisk_guitools-a145,2", "uptime >