similar to: Anybody Configure Shorewall w/ Sangoma WANPipe T1?

LD [M] /root/wanpipe/patches/kdrivers/wanec/wanec.o Building modules, stage 2. MODPOST *** Warning: "register_wanec_iface" [/root/wanpipe/patches/kdrivers/wanec/wanec.ko] undefined! *** Warning: "unregister_wanec_iface" [/root/wanpipe/patches/kdrivers/wanec/wanec.ko] undefined! CC /root/wanpipe/patches/kdrivers/wanec/wanec.mod.o LD [M]

Does anyone have any experience ith configureing the sangoma A102 card for testing using a e1 cross cable i've configured and installed the cards properly even the lights on the card are green which proves that my cross cable is properly built too. my problem is with asterisk which gives me these errors PRI got event: HDLC Abort (6)on Primary D-channel of span 1 PRI got event: HDLC Bad FCS

Hi all, I have tried to install Wanpipe 7.0.20 in a fresh-installed Debian 8.5 (Jessie) server, but when I reach to the point where I have to enter the Linux Headers directory *(installed in default with ?apt-get install linux-headers-$(uname -r)?)*, I get an error, the package refuses to compile and installation aborts. If I try the same process with Debian 7 (Wheezy), installation works just

Trying to install wanpipe 3.5.18. No errors during compile. But when I reach the point where wanpipe and dahdi_cfg is started, I encountered an error. Starting WAN Router... Loading WAN drivers: wanpipe done. Starting up device: wanpipe1 wanconfig: WAN device wanpipe1 driver load failed !! : ioctl(wanpipe1,ROUTER_SETUP) failed: : 22 - Invalid

I'm trying to get my Sangoma B600 working with Asterisk 1.6.1 and DAHDI 2.2. I've tried running ./Setup dahdi (and with --64-bit_4GB flag, running amd64) and the compile fails with this for many versions of the driver (incl. 3.3.16, 3.3.16.22, and 3.4.1): Building modules, stage 2. MODPOST 1 modules CC /usr/src/wanpipe-3.3.16/patches/kdrivers/wanec/wanec.mod.o LD [M]

I'm trying to install wanpipe on my new 2.6.21-2-amd64 core 2 duo machine (Debian's amd64 works with EMT64 too) to run Asterisk. I'm getting compilation errors when trying to install the wanpipe utilities. We are intending to use a Sangoma A102 card for ISDN30 in the UK. I've tried both the current stable 2.3.4-10 release and the new wanpipe-3.1.3 beta release of wanpipe. The

Hi, I migrated from asterisk 1.6 to 11.3. The Server has a Sangoma A104 quadPri card installed. OS is a fresh installed Ubuntu 12.04 64bit libpri, dahdi etc. all latest releases.. Sangoma says... driver is compatible with ANY asterisk version... I tried driver 3.5.8... Setup ended with error. I tried (latest) driver 7.0.1 Setup went through, Asterisk is showing dahdi channels... all fine....

Thanks for replying. It's there, /usr/src/zaptel and it's valid. The script checks for its existence before compiling. The only thing that's unusual about this zaptel is that it is patched to support KB2 echo can. Gavin: Thanks, already cc'd Sangoma support. Hope they are working today! -----Original Message----- From: Eric "ManxPower" Wieling

Sangoma support did something and the driver is there. Rebooting now with the new card. Hold me, I'm scared. -----Original Message----- From: Colin Anderson [mailto:ColinA@landmarkmasterbuilder.com] Sent: Friday, December 22, 2006 10:09 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [asterisk-users] Sangoma Wanpipe 2.3.4-3 compilation fails un der FC2

My Sangoma Experience in Asterisk: Followup 2005-05-06 original review can be found at: http://astguiclient.sourceforge.net/Sangoma_experience.txt It's now been a month since I finished my last round of tests with the Sangoma A104u board in Asterisk. I have had a lot of conversations with the guys at Sangoma about how my system runs so that they could set up their test systems to try to

Newest wanpipe (3.3.16) beta drivers do not compile against dahdi-linux 2.2.0-rc2 which is what you get when you get dahdi-linux-current.tar.gz Anyone have a workaround or patch? Error below ==================== Building modules, stage 2. MODPOST CC /usr/src/wanpipe-3.3.16/patches/kdrivers/wanec/wanec.mod.o LD [M] /usr/src/wanpipe-3.3.16/patches/kdrivers/wanec/wanec.ko make[1]:

Hi everybody! I'm triying to install a Sangoma A200-R FXO card on a Debian Linux 5 (Lenny), 2.6.26 kernel. To install wanpipe driver I type: WANPIPE_FOLDER# ./Setup install Everything seems to be ok. There are no broken dependencies and the hardware is well detected, even zaptel is recompiled with no errors, but at the time to compile wanpipe I'm getting this error message:

Hi list. some info: zaptel 1.4.0 wanpipe 2.3.4-2 kernel 2.6.19.1 Debian I'm trying to build wanpipe on my server, but I got a error that it can't find config.h.. I found a post on an other unrelated mailing list which stated that includes/linux/config.h has been removed from 2.6.19. It also suggested replacing all references to config.h with autoconf.h make -C

Hello All; Wanpipe is working only with sangoma cards so it does not work with digium cards? Also, who is better: to have echo canceler built in with the hardware or using olsec? Regards Bilal

Hey! I am installing Sangoma A102D wanpipe driver and i got following error. what is this ? why dir isn't there ? wanpipe-3.5.16 # make dahdi DAHDI_DIR=/usr/src/dahdi wanpipe-3.5.16 # make install ....Send .... .... Installing Wanpipe Firmware update utility in /etc/wanpipe/util/wan_aftup install -D wan_aftup /usr/sbin/wan_aftup install -d /etc/wanpipe/util/wan_aftup/scripts install:

Hi all, as good? I try to install asterisk-1.2.14, zaptel-1.2.12,libpri-1.2.4,addons-1.2.5 , sounds-1.2.1 and wanpipe-2.3.4-3 and hwec-utils-beta4-2.3.4 But it is not compiling drivers of the Sangoma, why udev's for board in "/dev/zap"(1-31, channel,ctl,pseudo,timer) is not created. But when I install a board TE110P Digium, udev's is created and asterisk functions perfectly. : )

Hello, there has been a post to this list somewhere arount april which said that it is possible to use a Sangoma BRI A500 card with zaptel and asterisk bristuff. That is, without sangoma_brid and sangoma_mgd daemons and without woomera channels. Could anybody give me a short hint how to configure this? I tried wanpipe-driver + zaptel + asterisk-bristuffed, but I couldn't get zaptel to

Hi, I'm trying to install asterisk(v1.2.22) with FreepBX(v2.2.3) with a 4-Port FXO Sangoma card A200. I'm using Fedora 7 (x86_64) kernel version 2.6.22.1-27.fc7, but i'm having these errors: $ ztcfg -vvvv Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS

Hey Guy, I have ubuntu 10.04 64bit and compiled dahdi / wanpipe 3.5.19 /asterisk-1.8.x I didn't understand what is the relation between wanpipe and dahdi ? do i need to start wanrouter service ? I am getting weird errors and my system got kernel panic many time when i restart dahdi service. any idea ? what is the startup sequence of all these service ? root at example:/etc/asterisk#

Hi I wanted to get some expert advice on this. I have an ordinary hardware SAN from Promise Tech that presents the LUNs via iSCSI. I would like to use that if possible with my VMware environment where I run several Solaris / OpenSolaris virtual machines. My question is regarding the virtual disks. 1. Should I create individual iSCSI LUNs and present those to the VMware ESXi host as iSCSI storage,