similar to: X-WIN32 local network

Hello, I have the following situation : Server with 2 nics 1 nics connected to the internet, 1 connected to the LAN I have OpenVPN running on the system and the following setting in the tunnels file : =================================== openvpn:2000 net 62.58.0.226 openvpn:2001 net 62.58.0.226 openvpn:2002 net 62.58.0.226 =================================== All tunnels ran for weeks

The 1.4.6 version of Shorewall makes additional demands on the shell. I have found that both the RH9.0 version of ash and the version of ash that has long been available from the Shorewall download sites are *not* suitable for use with Shorewall 1.4.6. The LEAF Bering version of ash on the other hand works fine. Attached is a small shell program that will allow you to test your shell for

Hello, I was helping a friend to extend his Shorewall firewall and noticed something strange in the syslog Shorewall:all2all:REJECT:IN= OUT=eth1 SRC=192.168.0.1 DST=192.168.0.2 LEN=39 TOS=0x00 PREC=0x00 TTL=64 ID=3021 DF PROTO=UDP SPT=44337 DPT=1503 LEN=19 Anybody got an idea what this can be? -- Groeten, Peter Device response received when none expected. - - Heb je een Dreambox 7000S ?

Hello, My workstation should synchronize its clock on my server but from some reason this is not allowed This is what I get in the log when the client tries to sync with NTP Oct 25 08:25:47 server kernel: Shorewall:all2all:REJECT:IN= OUT=eth1 SRC=192.168.0.5 DST=192.168.0.4 LEN=76 TOS=0x10 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=123 DPT=1031 LEN=56 My internal network is eth1 , external is

Hello, My server is on Mandrake 10.1 off. eth0 is WAN with static IP connected 512 DSL eth1 is LAN. I am using shorewall. I have NAT on eth0. I have squid running. I am not able to connect to MSN. What are the rules to allow MSN ? Thanks Varun

Hello, I recently setup Shorewall 2.0.9 on a RedHat 9 machine using the two interface quick start guide. ip addr show: 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 brd 127.255.255.255 scope host lo 2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100 link/ether 00:20:ed:76:dc:82 brd

For some reason, ip_conntrack_ftp & ip_nat_ftp aren''t loading automatically. If I load them manually with modprobe FTP works. Both ip_conntrack_ftp & ip_nat_ftp are listed in the modules file - I haven''t mucked with the order at all, so I assume it''s right. I''m using Mandrake 9.2 but, as recommended, I uninstalled the Mandrake version of shorewall and

http://shorewall.net/pub/shorewall/2.2-Beta/shorewall-2.2.0-RC1 ftp://shorewall.net/pub/shorewall/2.2-Beta/shorewall-2.2.0-RC1 Problems Corrected: 1. The syntax of the add and delete command has been clarified in the help summary produced by /sbin/shorewall. New Features: 1. TCP OpenVPN tunnels are now supported using the ''openvpn'' tunnel type. OpenVPN

hi, we use openvpn as for our vpn endpoints and we''ve got about 70-80 vpn connections which means we have tun0 - tun80 interface. i''d like to define one zone for all of our vpn connections how can I do that? actualy our local zone is 192.168.0.0/17 (not 16) and all of the vpn''s are in 192.168.128.0/17. our should i define somehow the local zone as 192.168.0.0/16? but in

Hello Tom and all, Quick question: Is it possible to operate an OpenVPN server from behind a firewall? Is it as simple as setting it up and placing: DNAT net loc:192.168.10.20 udp 5000 - ipaddress -- Paul Slinski -o) Network Administrator /\ Global IQX, Inc. _\_v Global IQX is the leader in integrated e-business automation solutions for the group life and health insurance

Hello, Today I restarted the firewall machine during an outage of the ADSL line overhere. At the boot Shorewall did not start but stopped during start. The problem was that the ADSL line was down so no DNS server available to resolve hostnames. I have a hostname in "blacklist" file and therefore shorewall did not start. Is this problem solvable without putting an IP address in the

Okay, no one had any idea concerning my Radmin question, which I still haven''t figured out. However, I am now trying to figure out an FXP problem. All of the needed details are listed below the description problem. Problem: I have a local windows XP pro computer running FlashFXP behind shorewall 2.0.9 (unpatched) with only two interfaces (ppp0 and eth1) as loc:192.168.1.5. The server

[image001.gif] Diploma's en titels zonder studie op basis van eerder verworven competenties Geachte heer of mevrouw, Graag willen wij u attenderen op onze unieke dienstverlening. Wellicht dat er voor u mogelijkheden zijn om zonder studie op basis van eerder verworven competenties via een External Programme in het bezit te komen van een academische Bachelor, Master

I'm a relative R novice, and sometimes the simple things trip me up. Suppose I have a <- c("apple", "pear") and I want a logical vector of whether each of these strings contains "ear" (in this case, F T). What is the idiom? Quizzically, Mark Lindeman

In my spec_helper, I want to load yaml file to a variable, and then be able to use that in my tests. spec_helper.rb: RSpec.configure do |config| end config = YAML::Load(......) some_spec.rb describe ''blah'' do it "should be...." do MyClass.new( config[''test''] ) end end How can I do this? -------------- next part -------------- An

Hi, I'm currently testing the XDMCP functionality of LightDM which seems to work flawless, however, there is one issue which I cannot resolve: The machine I am using for my setup is a dedicated machine running some VM's, these VM's don't have any graphics card associated and run headless and the only form of command is via a web interface or SSH. LightDM seems to use the

Hello, I have the go ahead to fix documentation. For starters I will clean all extraneous crap from the markup. Then fix any errors and typos. If anyone sees any gramatical errors or typos or needed clarifications or expansions or whatever, please post them here. Or additional FAQ entries, etc, all will be considered. I hope to keep most of this conversation on the shorewall-devel list. Any

Good Morning Mike, I''m finding that when I load a document, XXE is blindly removing all "superfluous" white space from "programlisting" elements. This of course is leading to a real mess (check out the FAQ on the web site :-( ). What can I do to avoid this? -Tom -- Tom Eastep \ Nothing is foolproof to a sufficiently talented fool Shoreline, \

How would i allow xwindows and xdmcp through would it be ACCEPT net -> fw all 117 and ACCEPT net -> fw all 6000:6100 ? and for that matter how would i stop x traffic from leaving the fw machine? REJECT fw -> net all 6000:6100 ?

Everyone, Progress was slow today. I started out well, but then I ran into Documentation.htm. Progress slowed considerably, as I analyzed the document structure. I''m up to /etc/shorewall/hosts Configuration. I hope to finish Documentation.xml by tomorrow evening. Converted documents: 6to4.xml CorpNetwork.xml FAQ.xml Please post feedback, if you see any problems with the converted