similar to: Fowarding through networks

on i have a small question we have a linux box with a windows 2003 server well we natted all the ports and mail is working remote desktop is working web is working the only thing that does not work is vpn how can i foward vpn traffic to this server i checked the site and searched for foward vpn and got nothen can somone please enlight me where to start Marshal McInnis Tech / Web

breakdown of what iam doing ok i have access to 6 ips and i want to run all of them through my firewall ifconfig eth0 209.159.32.162 netmask 255.255.255.0 up ifconfig eth0:1 209.159.32.163 netmask 255.255.255.0 up that sets up the network card to have 2 address well in shorewall i tried to add eth0:1 to my interfaces well it says that Determining Zones... Zones: inet inet2 loc cust vpn1

We have a Mediatrix 1102 hooked into the network. Both of the attached analog phones and all of their features work, but in the CLI we keep getting "-- Got SIP response 481 "Transaction Does Not Exist" back from XXX.XXX.XXX.XXX " (Where XXX is the IP address of the Mediatrix ) every few minutes. I have changed most of the settings in the sip.conf multiple times and have done

For outgoing calls made on our PRI circuit we are setting the Caller ID using the format Exten => _9XXXXXXX,1,SetCallerID(1601XXXXXXX) The monitor shows that the CallerID is being set to the specified number, but yet when the call is received on the user end the ID is always the base number of our DID. For example we have 8600-8650 as DID's but the callerid is always 8600 regardless of

I''m running fedora core 2 with 2.6.7 kernel when I have /proc/sys/net/ipv6/conf/all/forwarding Set on Listening Deamon''s will not respond to Sync requests. if I turn it off which breaks routing of course. then the Deamons can make connections. Is this suppost to be normal behavior when the box is routeing IPv6? This only happens with ipv6 connections.

I did not really spend too much time on looking at call forwarding and wonder if someone could help me. It seems that for setting call forwarding on the Polycom phone itself, only "forward all calls" will work. The other call forward function like "forward if no-answer for n rings" or "forward if busy" does not work at all on the phone. If that is the case, it

I run a Virtual Machine that uses SSH to remote forward Windows File Sharing securely across the net. I need to forward several servers and I map them to different high numbered ports on the SSH server (virtual machine), 10139,10140,10141. The virtual machine is connected to a bridge xenbr0 on the host system that also acts as a router - the server and a single interface on the host machine are

i ask here after give up reading and following all the documentation.. i got 3 nic eth0:222.222.222.222 netmask:255.255.255.252 gateway:222.222.222.221 eth1:10.10.10.254 netmask:255.255.255.0 gateway:blank eth2:10.10.11.254 netmask:255.255.255.0 gateway: blank i''m running redhat9, and shorewall2.2.2 eth0 connected to dsl modem ( static ip ) eth1 connected to d-link router ( for

shorewall only hangs my named server everything eles works except named and thats why my email dont work when i have shorewall started it dont give me any messages when i try it is named tcp or udp? --------------------------------------------------------------------------------

Hello, I would like to set a specify default gateway for my VMs. However I’m not succeeding Here after is the isolated lan, where I added the statement <route address='10.0.0.0' prefix='8' gateway='10.10.0.7’/> where my aim is to route to the 10.10.0.7 What should I do , to make it works ? Thanks <network> <name>prd-private-lan</name>

Hi, I want to have several IP''s for my connection and each IP will have it''s own hostname. Now I want to serve a web server and mail server for each hostname/IP_addr pair on the same box in the internal LAN using one apache and one postfix daemon. If I do one SNAT and several DNATs then only the hostname which I SNAT the server to would work. Is the only way to do it

I have two/three PPTP servers on my network and each one of them are on their own subnet and I want to be able to send traffic to each and everyone. My rules file entry is as follows DNAT net loc:1.1.1.1 tcp 1723 DNAT net loc:1.1.1.1 47 and DNAT net loc:2.2.2.2 tcp 1723 DNAT net loc:2.2.2.2 47 however all the traffic only goes to 1.1.1.1 because its the first DNAT entry. I tried the

Sorry for the long descritpion of the problem, I''d like to know If I misunderstand something or if I meet an intrinsic limit of my setup. 217.58.51.162 HDSL eth1 - SRV_XP: 192.168.254.10 eth0: 192.168.254.1 -----+------------------+------- 81.121.243.250 ADSL eth3 - I want to allow incoming pptp request (port 1723) to be forwarded to srv_xp

Hello, I''m trying to setup DNAT to forward to a PPTP Server behind Shorewall. I setup the PPTP rules per your documentation with tcp port 1723 and Protocol 47 DNAT to my PPTP Server in the local zone. Looking at the logs it is dropping the connection going to port 1723. It is also dropping UDP port 1701, don''t know if it is of any significance. I looked at FAQ 1a and b and the

Hi all, I have a VPN setup but it only works once in a while. It seems my firewall (shorewall 3.0.8) is blocking protocol 47. Here is what I have: eth0: internet eth2: dmz - my pptp server My entry In the rules file: pptp/ACCEPT fw dmz:192.168.253.2 My pptp macro ############################################################################### #ACTION SOURCE

hey my rsyncd will work well for a while then i will start to get this error rsync error: timeout in data send/receive (code 30) at io.c(153) check the error logs and just have this in there it is on a local box so i know its not a network problem -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

Hi all, I´m running a server that frecuently needs to open a pptp session with a remote server outside my Company. This server is running behind a Shorewall firewall and I don´t find information in Shorewall web page because there is no information in the link http://www.shorewall.net/PPTP.htm#ClientsBehind Nowadays I can connect this server with the remote one but te session is closed after

Dear Friends, I am new to Linux and Wine. I have just d/l wine and trying to configure it. I would like to know that after loading wine on Linux can i get windows like start button and menu ? I want to install Interbase Client on wine. It has normal windows style setup program i.e. setup.exe file. Can somebody tell me how to use setup programs with wine and later use them ? Thanks R. S.

Hello, You will find in attachment the layout of my current physical configuration. For now, the Cable ISP is not used. Since it is a dynamic ISP, my mailserver is rejected and my domain name registers on blacklists like ORDB and al. I want it to be used as a default gateway except for my mail server that would be seen as coming from my "honest" ADSL ISP. Here is

Hi all, I wonder if someone can help me with this: The setup is as follows: 192.168.1.254 - wireless ADSL modem, with DHCP pool on 192.168.100 - 192.168.200 192.168.1.250 - Linux firewall RED interface 192.168.2.250 - Linux firewall GREEN interface. There are some normal LAN clients behind the Linux firewall's GREEN interface, which can all access each other's shared services and also