similar to: MAC Validation and related problem that is killing me...

Hi, I have a network with 4 NIC, one external, DMZ, and two internal, B & C. It has been setup correctlly and working now. The problem I have now, is any client workstation running on network B, MSWindows 2K / XP / NT cannot connect to the primary domain controller which is in network C. The clients cannot even see the network domain in the explorere window. I believe the problem is

I went to the wiki and searched for both wireless and wifi and did not find anything related to wireless cards in CentOS. I think it would be stellar to have something similar to the laptops page but for wifi chipsets. I would propose it have three categories: FOSS chipsets Native driver but not FOSS chipsets (ie atheros via madwifi) NDIS Wrapper FSF has compiled somewhat of a list at

I see that ABPTech are now offering this SIP Wifi phone. Does anyone have an experience with it? I've considered the Pulver/Zyxel wifi phone but would really rather have something that can handle WEP or WPA. I run an 802.11g wlan with 256 bit WPA encryption. This Hitachi phone looks very much like a cell phone, which could be ideal. Michael -- Michael Graves

Hi! I would like to have feedback on wireless (wifi / 802.11b) IP phone to use with Asterisk PBX. Can you sugest model, The best and also the worst to use. Thanks, eric.

Hi, I have a IBM ThinkPat T30 a Cisco Aironet wireless internal in the laptop 802.11b only. It works great with open Acess points, but when i try to connect to encripted ones. I got the dialog box asking for the passphrase 128 bit, I enter it and after that i receive the dialog box again! Maybe my card do not support WEP or I am doing something wrong? Here is part of what i can see on

Hi, I am investigating getting a wifi VoIP phone because its may be a better option than an ATA and a cordless phone.. Does anyone have any experience with the whats out there?? Do they support things like WPA etc?? I have heard the battery life can be a problem.. Is this the case? Thanks..

Have decided to give up on the embedded Broadcom 4312 wireless device in my son's Dell laptop. I get WEP open authentication to work, but nothing else. I was about to dump the bcm43xx kernel module and the bcm43xx-microcode5.fw firmware and work with the newer b43 module and associated firmware. However, he claims that at school, he has always had intermittent problems with wireless under

Hi folks! Based upon your experience on the field what wifi sip phone would you reccomend ? A customer asked for a wireless * install and I'm looking for advice, tnx Alessio Focardi [[*] - Interconnessioni Italy -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060628/05b2fb30/attachment.htm

Hi List, Hope everyone is recovering from the festive season :) (ok we still have new years i guess!) Anyways, I was wondering if anyone has had any successful dealings with WiFi phones and operation with '*' at all? I've been keeping my eye on the LinkSys WIP330 ( http://preview.tinyurl.com/nccxn ) and wondered your collective thoughts? Would I be correct in thinking that (as

Hi, I have a laptop DELL M90 with an Intel PRO/Wireless 3945ABG card. I'm using centOS 5.1 kernel 2.6.18-53 i386. I installed ndiswrapper v 1.52 I installed the driver http://ftp.us.dell.com/network/R164255.EXE The wireless-tools is v 28.2 When I trying to connect to my wireless access point with encryption key disabled everything work fine !!!! When I enabled the encryption key on my

Does anybody have any experience with the ZyXEL Prestige 2000W? I am having problems with the line tear down when I call another extension. If nobody picks up at the other end when I hangup the 2000W, the other extension continues to ring. Is there any way to hangup a SIP call if there is no more traffic? Asterisk seems to think that there is still a connection open. This is pretty annoying

I'm about to start working with WiFi phones on my Asterisk installations. Can anyone tell me if they are using WiFi phones on wireless network that is extended with WDS and how well the phone handles jumping from access point to access point while on a call? Do any WiFi phones support WPA encryption or are they all still under the impression they are only being used on public hot spots?

Hi all, Im preparing a quote for a 5 Star hotel, planning to have around 100 SIP Wifi phones for PBX operations running on 100 AccessPoints. Network is running in ARUBA Networks - AP70 access points. The initial recommendation is to go for Hitachi Wifiphones, but i would like to know from the group the recommendations. Im planning to put up Asterisk as the PBX, Please advice me the do's and

Hi! I''ve been searching the net for information about this topic, but I can''t find anything relevant to my problem or I don''t understand the answer completely. Please enlighten me... :-) I''m trying to replace a Cisco PIX firewall with a Linux Shorewall box. Today the users behind the Cisco FW is on a NAT-network and in the same network there are a couple of

Well I think we all need to look at something like this first. We will be one of the first people in Europe who will be selling this. If anyone is interested do drop me an email. Picture of the phone can be found here. http://cyber-telecom.net/wifi-gsm.jpg GSM / VoIP Over WiFi Dual-Mode Phone CYBER-TELECOM released the world first commercial GSM/VoIP Over WiFi dual-mode smart phone, in

Hi, I followed the instructions in the section "Squid (transparent) Running on the Firewall" on http://www.shorewall.net/Shorewall_Squid_Usage.html to setup Squid transparently on a Linux gateway. My net is as follows: loc subnet --- fw Linux Gateway --- ADSL router 192.168.1.0/24 192.168.1.92 (eth1) WAN.WAN.WAN.2 (gw = WAN.WAN.WAN.WAN (eth0) 192.168.1.92) (gw =

Hello everyone. I know it's a little bit off-topic, but I was just wondering... Has anyone ever had any experience with asterisk, a wi-fi meshed lan (with more than one access point) and wi-fi sip phones? I made some tests but I'm not really satisfied.... Wi-fi phones are a curse (as far as I know even Nokia eSeries -I personally own an e70 model- have their flaws): - random sip

Hi all, Finally, I have installed openvswitch from source to two CentOS hosts: one 6.x and other 7.x. I will do some tests using openvswitch bridges to my KVM machines. One of these tests is to add a wlan0 adapter from comandline but only when this wlan0 is associated with a ssid without assign an IP. Is this posible? Do I nees to add some ebtables like, for example, Debian's wiki

My company has, very generously, donated a space on their rack and a server for me to use for development of a more up to date Shorewall webmin interface. Based on the advice here, I''ve also signed up for a sourceforge account, and will register the project later today. I would like to solicit the help of a few people on here who are willing to help move this project along. There were

Paul- I have a ZyXel Prestige 2000W. It seemed to be junk at first, (not saving settings, flaky network connectivity, etc.) But upgrading it to the latest firmware seemed to fix the issues. The only complaint I have with it currently is weak encryption. (64 or 128-bit WEP) YMMV. Brian > >Message: 1 >Date: Thu, 13 Jan 2005 10:34:45 -0700 >From: Paul Fielding