similar to: How do I configure additional serial ports?

I have been investigating pci pass-through for virtualized guests and the documentation I have found seems to me to lack a certain consistency in its example. This may be due to my not understanding what it is trying to inform me. What I wish to do is to configure a pci multi-port serial i/o card for use by a single virtual host. I start by running lspci -v on the host to identify the serial

Hi guys; I'm having a problem with a new pc that has an Realtec ethernet device. Don't know why the driver is not loading and is not detected during installation process. I tried to load r8169.ko unsuccessfully. It load but no device is detected. No dmesg or /var/log/message. ?Any help on how I can configure correctly this ethernet device? This are the data that I have: # lspci

CentOS-6.2 We have a dedicated CentOS-5.7 host used for fax reception and transmission that we wish to move to a CentOS-6.2 virtual guest instance. The CentOS-6.2 virtual host has a 4-port serial card installed. lspci -v tshows this this: 03:00.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 0 (Uart) (prog-if 06 [16950]) Subsystem: Oxford

Hi, I''ve set up a domU with video card access per the instructions at <http://www.nvnews.net/vbulletin/showthread.php?t=68703>; video is working quite nicely. However, I''m having some trouble getting the USB keyboard and mouse to work. I have a motherboard with onboard USB 2.0, and a USB 1.1 PCI card. The motherboard USB uses several PCI addresses. If I

We are in the process of migrating one of our embedded apps to use uart by default instead of sio in RELENG_7 in prep for the day when sio eventually disappears. Unfortunately, the application doesnt want to work with uart with puc backed devices, but still works with sio. Stranger still, the app works with the uart driver when uart attaches to the built in com port on the isa bus. However,

I''ve been trying for several days to get a xen dom0 booting as described on Boris Derzhavets blog. I have been able to boot Jeremy Fitzhardinge''s pv_ops kernel under xen, but my X server wouldn''t start so I''ve been trying to get Andrew Lyon''s rebased opensuse patches to work. I have asked for help in the freenode ##xen channel but they

I installed a 2 port serial PCI card on a system running CentOS 4.3, but I can't get the additional serial ports to work. The card I used is from StarTech (http://www.startech.com/Product/ItemDetail.aspx? productid=PCI2S550&c=US). When it is detected by kudzu, it shows up as a "NetMos Technologies PCI 9835 Multi I/O Controller". I've included the output of

So, I made a mistake a bought four systems with the Intel Core i3 processors, without doing my homework to make sure that these systems actually supported VTd. Turns out there''s plenty of information out there indicating that the Core i3 processors do *not* support VTd. I was counting on VTd for two applications: Graphics Passthrough and passing through a PCIe 4-port serial card. Of

Hi, I am having periodic sound clicks (2-3 per second) on all FXS of a TDM400P when the remote end is my VoIP provider. However: - recording the conversation on the asterisk, does not have the glitches, although I can hear them on a real phone. - My VoIP provider to my VoIP phones through the same asterisk is OK. - TDM to TDM through the same asterisk is OK. I tried with and without

Hi, I using asterisk 1.2.4 on a CentOS with Linux 2.6.9-22.0.2.ELsmp kernel. I've two x100p cards connected, only one card is reconigzed by asterisk. 02:01.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface 02:02.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet (rev 31) 02:03.0 Communication controller: Tiger Jet

Hi! I tried to pcipassthrough usb-controllers to domu to use it with a memory-stick. First xen complained that the driver needs write-access to its configuration space, so I added these to pci-quirks. Since it still didn''t work I also added the device to pci-permissive but I still get an errormessage with Oops (at the end of this email) when sticking in the memory-stick. I tried

Hi! I tried to pcipassthrough usb-controllers to domu to use it with a memory-stick. First xen complained that the driver needs write-access to its configuration space, so I added these to pci-quirks. Since it still didn''t work I also added the device to pci-permissive but I still get an errormessage with Oops (at the end of this email) when sticking in the memory-stick. I tried

guys, A bit off topic here, but since this issue already has a history here: serial connection to the SCD, the never ending story ... - the intel D945GSEJT mainboard (ICH7) has two serial ports with onboard connectors which require a ribon cable to the external DB9 connectors in the case. I tested 5 cables, but none works. whereas I'm not sure if it is a cable problem. this is what dmesg

Hello, I am having problems, getting my asterisk-domU to work properly. It consists of the following components: - Debian Etch under Xen-3.1 with a 2.6.18-kernel - Asterisk 1.2.24 - mISDN-1.1.5 I have 2 HFC-ISDN-cards, which I pass through to the Asterisk-DomU in permissive mode. This is working fine. The strange problem is, that the two HFC-ISDN-cards are not beeing initialized by the

PC: HP Vetra VL400 Mainbood: Intel815 BIOS: Phonix 4.0 release 6.0 OS: REDHAT 9.0 I installed the X100P in PCI slot 2 and disable the USB port, serial-port and parallel-port in BIOS. I can't found the X100P card in " cat interrupts" But I can found the card in the "cat ioports" use "lspci" I found the X100Pcard use the interrupts 11 too. Who can help me to solve

Thanks to the kind person(s) who worked on this. I am using PCI passthrough right now and it works. I hope support is added for VT domains too; That would be extremely useful. So far I have tried a NIC, USB, and PCI Video. The NIC works flawlessly. USB works as long as the devices are present at the time the domain is started. Hotplugging USB devices seems not to work. If I open

Hello list, After upgrading from BRIstuff 1y-b to 1y-e my ISDN card is suddently detected as 2 ports instead of 4. I still load the driver as "modprobe qozap ports=12" as I've always done. But now it only sees 2 ports. Output of "lspci -vvv" ------ cut -------- 02:01.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01) Subsystem:

Hi All, I hope I'm posting this to the appriopriate list, and that cross posting to two lists is OK. (If not, I'm sure I'll hear about it quickly :)) I'm running Asterisk on my (new) VIA EPIA-V motherboard. This seems to be the ideal platform for a home version of asterisk - its small, quiet, low power, and should have plenty of computing horsepower if only it would work!

Hello, I have problem with capi, I can't install it. I have putted all info what I did and what I get :). I think you can suggest me how to solve this problem.and thanking you in anticipation. I have ISDN Frtiz!Card PCI v2.1and I want to install it to my ubuntu box (kernel: 2.6.17-10-server). Using command "lspci -vv" , I can see that kernel finds this card: *02:0d.0 Network

Hi all! I'm new with telephony cards and DAHDI drivers. I have installed Asterisk NOW 3.0.0 and update to Asterisk 11.7.0, modules are update too. I'm following the installation guide of Atcom [1] for AX1600P analogic card, modules are loaded [root at pbx ~]# lsmod | grep -E "hisax|netjet|dahdi" netjet 14618 0 isdnhdlc 4523 1 netjet mISDNipac