similar to: Hylafax without modems - SIP?

I've just had to replace my Hylafax server as the cooling fan in the rack case has died and could not be replaced. My box runs three fax modems, one for each of the original 3 fax machines that got skipped years ago. This means that I now have 3 lots of: USB to seral converter (new box doesn't have any COM ports. 9pin->25-pin serial cable Modem power supply phone line analogue port

I need to setup HylaFax which leads to my first question, anyone got an opinion on whether or not to use HylaFax or HylaFax+? Also, I have to setup a Digi serial port server for an external fax modem. Any reco''s on a robust unit that won''t need to be reset often? Thanks! jlc

Arch = x86_64 OS = CentOS-6.3 (FreePBX) Asterisk = 11.3.0 (FreePBX) Hylafax+ = 5.5.3 (epel) I am installing an Asterisk server with the intent of having it act as our fax server. The Asterisk system was installed using the current FreePBX distro which is reputedly based on CentOS-6.3. I have installed Hylafax+ from epel and I have built and packaged IAXModem-1.2.0 for CentOS-6 using mock and

Hi, I have problems with asterisk and hylafax+ iaxmodem. I can successfully send faxes to Panasonic KX-FT932 fax, but with Xerox WorkCentre M20i I have problems: No carrier. This is hylafax log, maybe you can suggest me where to find ... Oct 17 07:38:48.22: [22428]: SESSION BEGIN 000000041 180037052390906 Oct 17 07:38:48.22: [22428]: HylaFAX (tm) Version 4.4.2 Oct 17 07:38:48.22: [22428]: SEND

Can anybody point me in the right direction please? I'm having some issues getting iaxmodem and hylafax to talk to each other. I have no doubt that someone has had this type of issue before but I can't find anything useful in the archives or on Google. Under RH9, with chan_capi 7.1, Asterisk 1.2.24, with an AVI Fritz ISDN2e BRI card all working perfectly... I've downloaded and

My Centos 6.x use ghostscript.x86_64 8.70-15.el6_4.1 @updates for hylafax/avantfax from epel or rpmforge. I can't determine from which repository it come, yum list return: [root at fax ~]# yum list ghost* Loaded plugins: fastestmirror, priorities, refresh-packagekit, security Loading mirror speeds from cached hostfile * base: centos.digitalnova.at * epel: be.mirror.eurid.eu * extras:

I want to install Hylafax+, IAXmodem, and T38modem on my Trixbox 2.4 which is built on Centos 5.1 ("vmlinuz-2.6.18-53.1.4.el5"). Over at http://sourceforge.net/project/showfiles.php?group_id=148904 there are Hylafax+ rpms for: Fedora 7,8 Fedora Core 2,5,6 Redhat 7,9 I **think** Fedora Core 6? IAXmodem is only available in source at

I'm running into a strange issue with Asterisk + Iaxmodem + hylafax on the same machine. After rebooting the iaxmodems don't register to asterisk. Stoping and starting the relevant services gets it working, but what is the point of using init scripts if it does not work right? I already tried to adjust the init scripts in /etc/rc3.d so I have: S50asterisk s90iaxmodem S95hylafax So it

hi list , is having problems when sending a fax with hylafax and a card sangoma A200D, when he sends it arrives to the destination but it paginates appears in white this is my log Aug 20 16:11:08 voz FaxSend[6715]: MODEM Supports 40 ms, 20 ms/scanline Aug 20 16:11:08 voz FaxSend[6715]: MODEM Supports 40 ms/scanline Aug 20 16:11:08 voz FaxSend[6715]: MODEM WWW.SOFT-SWITCH.ORG spandsp/ Aug 20

I have all three running on the same box. I say OT because it appears asterisk is doing it's job just fine. It must be an IAXmodem or faxgetty (hylafax) problem When faxes work, they look great. I have ten IAXmodems setup with different ports and they register fine. I have ten faxgettys that startup fine. I start the IAXmodems and then faxgettys in inittab. They are setup as a roll

Hi, I have a question: In my company a have a 100% IP Telephony implemented (Cisco Phones, Routers, Switches, etc). We are connected to our operator by two E1 lines. The PBX is on operator side (a H.323 Gateway is configured on call manager). I study the possibility to implement a Hylafax server. In some sites I read that with the IAXmodem is possible to have virtual modems, with don't so

hi folks. i'm experimenting with iaxmodem + hylafax using DID to determine where to send the fax to it's final destination. however i have difficulties passing the DID information from iaxmodem to hylafax. in extensions.conf: exten => _XXXX,1,Dial(IAX2/iaxmodem0/${EXTEN}|20|r) exten => _XXXX,n,Dial(IAX2/iaxmodem1/${EXTEN}|20|r) exten => _XXXX,n,Busy exten => _XXXX,n,Hangup

Hi Guys Just wondering if you can help me and give me some pointers on what could be wrong in my setup. Everything seems to be installed. I have Asterisk 1.2.12.1 FreePBX 1.2.3 IAXModem 0.1.15 Chan_capi 0.7.0 The IAXmodem registers, faxgetty is starting in /var/log/messages but it just doesn't seem to pickup the call. In Chan_capi it says fax detected but no fax

Hi, I'm fighting with HylaFAX, Asterisk and T38Modem since some time, to get fax2mail and mail2fax working, my SIP-provider only supports T38 and thus using G711 with IAXModem is not an option. I have got running mail2fax with HylaFAX+ 5.5.0, Asterisk 1.4.20 and T38Modem 2.0.0 successfull, but I'm not able to upgrade to anything newer than Asterisk 1.4.24. I was able to break down this

Hi, we have a faxserver with Asterisk, IAXModem and Hylafax. Faxes come from a SIP trunk to Asterisk, then are forwarded throught 5 IAXModems managed with Hylafax. Hylafax users can also send faxes to these modems and Asterisk send them throught the SIP trunk. We also have a dedicated modem used only for sending faxes coming from an Hylafax dedicated user. Sometimes Hylafax reports that a modem

This is what you show CBeyond. You have some vouchers there from CBeyond that will allow me to get paid from them not you. Chuck Coleman President CCI Technologies/CC Call Center/CSI Technologies Director of Managed Services for Gurus2go Cell 510-439-6501 Confidential Email: This email and any files transmitted with it are confidential and intended solely for the use of the individual or

can anybody help me to choose the most reliable fax solution for * . after googling the net i found that there are at least two solutions for this, app_rxfax+spandsp and iaxmodem+hylafax. - what's the differences between these two? - which one's better? why? thanks

Hi, I'm trying to receive faxes using hylafax / iaxmodem but I just can't get it to work. We're using Sangoma E1 cards and have calls coming in over PSTN. I've tried turning hardware echo cancellation off but it makes no difference. This is what I get in /var/spool/hylafax/log: [root at faxhost log]# cat c000000003 Jan 14 12:44:43.39: [ 3403]: SESSION BEGIN 000000003 18005551212

I'm able to recieve fax with pure SpanDSP 0.0.2 + Asterisk successfully but I have problems with some fax machine so I wanted to try using HylaFax to recieve Fax instead of SpanDSP hoping that it'll solve my problem. I'm trying to connect Asterisk with SpanDSP using iaxmodem. My system looks like this: ISDN <---> Asterisk <---> IAXModem <---> Hylafax Asterisk

I'm just wondering here, in our community... Why not HylaFax for Fax solutions? I'm not saying bad about the big efforts on app_tx and app_rx with spandsp. But as me and many other asterisk users, we find out that Hylafax+IAXModem+Asterisk is very reliable. And from what i've been testing and reading, Hylafax is an extremely powerful: "HylaFAX is an enterprise-class system for