similar to: (no subject)

(a) Mark (mhr) suggested I buy a bare bones box, when I reported the problem with the mainboard in this Dell Dimension 2400 box. Possibly I can have the mainboard repaired (and the PSU, if it is also having problems), and if so, I will give this one to my Stepson and go the bare bones box route and have a more powerful box for myself. I looked at two (2) very low end Desktop mainboards in the

Hello, I am bussy building a xen cluster. When selecting mainboards for this cluster i came only up with core 2 duo mainboards with onboard gigabit ethernet cards with the realtek RTL8111B chipset. I have tested a mainboard and could not find a way to compile the driver sourcecode from the realtek site because of a missing /lib/modules/2.6.16-xen/Build directory. Can anyone help me out? I am

Hello list, I've been using PXE Boot for quite some time now and it has been working without any problems. I'm using a Biostar M7VIZ mainboard with a VIA KM400 chipset, and VIA-Rhine VT6102 NIC. Yesterday I upgrade the Kernel on my net-boot machine from 2.4.24 to 2.6.12. When I power on the machine it boots up normally. However, when I reboot the machine, the mainboards PXE-ROM only

Hi! I wanted to post this to Xen WIKI, but I have no write rights there. I have talked to AsRock support, and they said, that: - all Z87, H87, Q87 and B85 asrock mainboards support vt-d, - you have to check if vt-d is supported by the CPU, - there are no information on vt-d support in future haswell mainboard chipsets, like H81. I''m willing to test it, when I get hands on

Hello, I''m searching a vt-d capable system for one customer. I need to setup a new server which need to host one linux and one windows system. The windows system need to have access to one analog modem and thus I need vt-d to assign pci- adresses to the windows guest to bring some usb-ports into windows. I''m correct? Now I''m searching a small 19" rack server

Hi! Facing a strange problem about not being able to access the floppy drive after booting from a rescue-floppy with 2.2.x kernel on an asus p4te mainboard, i searched the net and found a bug in the bootsector of the 2.2.x kernels. Before control is redirected to the kernel, the floppy drive is shut down in a way, that freezes the FD-Controller on recent mainboards (like the ASUS P4T-E). The

Hello, I have some interesting issue with Intel VT CPU and XEN 3.0.2: I''m running XEN 3.0.2 on a MSI Fuzzy 945GM2 Mainboard (http://www.msi.com.tw/program/products/ic/ic_detail.php?prod_no=4) with a Intel Core 2 Duo Mobile CPU (T5500). When booting the mainboard BIOS says it found a EM64T CPU, which is AFAIK the code for a Intel CPU with Virtualisation Technologie. But whether Linux

Dear R-developers, the following may seem a weird question for R-devel – I try anyway, because it does seem to be related to usage of R and R's way of interacting with the hardware. When running R (2.4.0) on my new dual core Windows XP system (Intel Core 2 Duo E6600, Mainboard ASUS P5B, BeQuiet Power Unit), I observe various types of sounds (not related to fans) when running at full

Good day to you Im a casual Xen user and am also using I/O Virtualization. I had always trouble getting DMAR tables (and IOMMU) recognized with Asus Mainboards, despite the fact that I always used this boards a lot. Since the Nehalem Intel architecture, I looked into Intel Mainboards due the fact that this seems to work out with Xen, Linux and VT-d. My request is, that someone who tried Asus

Am 16.01.2014 08:17, schrieb Thomas Schmitt: > Another candidate image would be > http://cdimage.debian.org/debian-cd/current/i386/iso-cd/debian-7.3.0-i386-netinst.iso > which would have the advantage of not containing EFI/GPT stuff, that > might introduce more confusion. (I could not figure out whether your > mad board claims to be capable of EFI.) The board first appeared mid

Hi! ( I am sending this also to vorbis@xiph.org, because Peters homepage at http://www.blorp.com/~peter/ is ... dead, and I am not sure what his email address is ) I have a ( more than probably corrupt ) ogg/vorbis file that makes winamp lock up. If I drag&drop the file on winamp, the position slider will start flashing at the leftmost position and winamp does not respond to any user input

> > >This particular mainboard might be using different BIOS values than > >others, and there are several other alternative explanations for all > >these issues. Your last few tests suggest that we are on a good track > >now. > > I have just a couple of questions. First, who exactly is Mr. Syslinux? > Who is the primary developer/maintainer? Second, may I

Hi, I have a machine under heavy network traffic. Kernel is Centos kernel 2.6.18 SMP 32 bit. Ethernets are 05:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01) 05:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01) 06:01.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet

FWIW: I order a lot of Dells. My boss is cheap. That being said, I *like* Dell, it's a very well designed box. It's been said many times that Dell does not innovate, instead they copy and improve and I firmly agree with the "improve" part - they are a dream to work on. Some things to watch out for with Dell: 1. They typically tack on a shipping charge of $139 Cdn (yes they

Johan accidentally wrote me personally with the following email, which I thought would be better intended for the syslinux list. Replies to *Johan* please. :) -d ----- Original Message ----- From: "Johan Win?s" <johan.winas at isg.se> To: <david at weekly.org> Sent: Thursday, January 16, 2003 2:33 AM Subject: syslinux with flash discs? > Hi.. > > Just tried out

Hi, I just installed CentOS 4.4 x86_64 on our new 2 x Dual Core Opteron Server. First the system was unstable, but I after turning of Power-now it runs stable (anyone else experienced this?). However the following line in dmesg puzzles me: tg3: eth0: No interrupt was generated using MSI, switching to INTx mode. Please report this failure to the PCI maintainer and include system chipset

In message <BLU0-SMTP48EE10402F4B5AE9EC1E078BBB0 at phx.gbl>, Ady <ady-sf at hotmail.com> wrote: >Not all USB ports are the same. For instance, in some mainboards the >USB ports at the front of the computer case might be not recommended >for booting purposes. At least for these tests, I would suggest to >use always the same USB port where you have already seen success.

> > In message <BLU0-SMTP1383C5798F6C577E5FFF368BA40 at phx.gbl>, > Ady <ady-sf at hotmail.com> wrote: > > >> With respect to all of the actually important stuff however, I may have > >> missed it all, but I don't recall having read or seen an explanation of > >> what Ady & everybody else finally figured out about all this... > >

https://bugs.freedesktop.org/show_bug.cgi?id=50374 Bug #: 50374 Summary: nouveau fails to obtain EDID from NV11 (nforce IGP) Classification: Unclassified Product: xorg Version: unspecified Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component:

I am trying, without success, to compile a custom locale for the utf-8 character set. I have issued this command: localedef --no-archive -f UTF-8 -i /usr/share/i18n/locales/en_CA at yyyy-mmm-dd en_CA at yyyy-mmm-dd.utf8 which produces the requisite files without reporting an error but which none-the-less insists on using the iso-8859-1 charset: LC_ALL=en_CA at yyyy-mm-dd locale charmap