similar to: Centos for entry level server : Motherboard?

Hi there colleagues, atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f mem 0xefcb3000-0xefcb3fff irq 23 at device 5.2 on pci0 atacontrol detach ata7 - insert ATA disk (ad14) atacontrol attach ata7 pinics with Fatal trap 12: page fault while in kernel mode (kgdb) bt #0 doadump () at pcpu.h:196 #1 0xc0533227

What about the Asus M2N-SLI Deluxe motherboard? It has 7 SATA ports, supports ECC memory, socket AM2, generally looks very attractive for my home storage server. Except that it, and the nvidia nForce 570-SLI it''s built on, don''t seem to be on the HCL. I''m hoping that''s just "yet", not reported yet. Anybody run Solaris on it? Or at least on any

Hi List I have a Promise SATA 300 TX ( NOT raid ) that do have RHEL4 driver, but this driver doesn?t work with CentOS4 Why? What can I do to get a driver that works? SATAII150/SATA300 TX series RHEL4 32-bit Driver http://www.promise.com/support/download/download2_eng.asp?productID=139&cate gory=all&os=100# This one should be for the correct 2.6 kernel, but it's

Alrighty. I'm having a hell of a time and I need help. I'll try to give as much information as possible. ---------- HARDWARE ---------- MB: Supermicro PDSBM-LN2+ Intel 946GZ ICH7R + Intel? 82573 Memory: Crucial 512Mb, 1Gb, 2Gb modules matched to above MB. Processors: Intel Celeron 420 Conroe-L, 1.6GHz 512KB 64-bit Intel Core 2 Duo E6320, 1.86Ghz 4Mb 64-bit Intel Pentium E2140

Hello fellow listers... I'd like to get some recommendations on a good SATA controller for use with CentOS 5.x. It should be PCI, bootable, have 4 SATA ports, have native support (no crap proprietary or manually compiled drivers), and possibly hot swap support. Any ideas? There are plenty of PCI-X and PCIe controllers that I think would work but the use for this card is in a smaller 1U

While I wait for the Xen 3.0 Test CD to download, has anyone has luck using an Asus M2N32-SLI Deluxe motherboard (NVIDIA nForce 590 SLI MCP chipset)? The CPU is an AMD Athlon64 X2 3800+ AM2 w/ 2GB DDR2 533. The motherboard mostly works under Gentoo using kernel 2.6.18 with the "noapic" kernel boot option in my grub.conf file. The only major issue with the Gentoo kernel

I am having problems with silent data corruption on (some) drives connected to an MCP55 SATA controller. I have two servers, both running RELENG_7_0/amd64. One has the 570 Ultra chipset, the other has 570 SLI. Both chipsets have the MCP55 SATA controller. The server with 570 Ultra chipset has a bunch of older 250GB SATA-150 drives hooked up to the MCP55 controller and it is working just fine.

Greetings all- I need to purchase a PCIe SATA or SAS controller(non-raid) for a Supermicro 2U system. It should be directly bootable. Any recommendations? The system will be running CentOS 5.4 as an LTSP system. Thanks! --Tim

Good morning, I'm having a bit of an issue getting a 3CR990B-TXM NIC detected and usable. Just wondering if anyone knows of any issues with this NIC chipset and/or with the motherboard chipset. The motherboard is a Biostar GeForce 6100 AM2 using an nVidia nForce 410 chipset and nVidia GeForce 6100 vide chipset. I've tried FreeBSD 6.1, 6.2, 6-STABLE (from Wed), and 7-CURRENT (from

From: "Bryan J. Smith <b.j.smith at ieee.org>" <thebs413 at earthlink.net> > I wrote a pre-sale evaluation back in January 2005 here: > http://lists.leap-cf.org/pipermail/leaplist/2005-January/000532.html > ... Tyan S2895 -- nForce Pro 2200+2050 Just know that the pre-sale evaluation was of the nForce4, and didn't take the nForce Pro 2200 and 2200+2050

I've tested both 6.3 and 7.0-RC2, amd64 architecture, and have found the occurrence of an interrupt storm using an ASUS A8N-SLI Premium (nForce 4) motherboard with an AMD Opteron 175. Relevant dmesg output: atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA

In addition to bug 70972 (Modesetting failure at 1280x800), there may be another bug affecting the NVIDIA GeForce 7150M/nForce 630M. I think that this is a separate issue from the above. When using KDE or Ubuntu Unity with nouveau on this GPU, there were artifacts and missing UI elements. I think that this is probably more likely to be a rendering issue rather than a display issue. I am not sure

Hi, Segate has released the ST3750640AS 750 GB sata drive. I would like to take two of these and plug in to a the Nvidia Nforce 4 Sata I/F an run Zfs on . ( I have installed SXCR build 40 on a shuttle SNP25 PC last weekend with some install problems I reported in the install-discussionlist ) I there any limitations anywhere in the path to the drive that would

I am using centos 5 x86_64 AMD64 X2 4200+. I am current on yum update. My machine has two ethernet cards. e1000 (eth0) and forcedeth (eth1) [root at fsdsigns2 ~]# more /etc/modprobe.conf alias eth0 e1000 alias eth1 forcedeth sometimes on boot the forcedeth driver thinks it is eth0: [root at fsdsigns2 ~]# dmesg | grep eth forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.

I had to replace the motherboard on one of my CentOS 4 systems and am now getting a kernel panic. When I try to boot up, I get this: Volume group "VolGroup00" not found ERROR: /bin/lvm exited abnormally! (pid 448) mount: error 6 mounting ext3 mount: error 2 mounting none switchroot: mount failed: 22 umount /initrd/dev failed: 2 Kernel panic - not

Hello I'm using mfcr2 support (unicall) in asterisk 1.4. Everything is working fine, asterisk can answer calls. But after some random period of time mfcr2 module stuck. When I make a call to my * box I can hear only signal of getting caller ID ("tritirirti" - like jumping on :) ) and connection is terminated by my telecom operator. When everything I ok after few seconds of this

I am fairly sure that I had gotten this to work before, and I know that the Centos4-live disk worked OK, but now (maybe since I upgraded BIOS) I get this sequence after booting the live cd: Creating /var in RAM ... Done Found Centos-live.sqfs but couldn't mount it: Linking /usr to /centos-live/usr /linuxrc: 1208: [: not found Freeing unused kernel memory: 296K freed Write protecting the

Hi. I am in the Brazil. I have a problem on Unicall for Asterisk 1.4. I am working with E1 with 30 channels. Message when it receives calls: chan_unicall.c:2603 handle_uc_event:unicall/1 protocol error.cause 32772. My files: /etc/zaptel.conf: span=1,1,0,cas,hdb3 cas=1-15:1101 cas=17-31:1101 loadzone = br defaultzone = br fxoks = 32-55 /etc/asterisk/unicall.conf: [Channels] language=br

I can only conclude that Samba is an elaborate hoax and here's why. 1) Setup is more complex than Sendmail (it set the standard for complexity) 2) Even the simplest smb.conf causes trouble 3) You can pass ALL the tests in the DIAGNOSIS procedure, AND Samba will still not let you SHARE FILES or SHARE PRINTERS between Windows and Unix but you WILL be able to BROWSE YOUR SHARES (Just pretend

Has anyone installed Linux (CentOS or other) on a Tyan K8SE (S2892) motherboard? I'd really like to hear your experiences -- with this board or Nvidia's nForce Pro chipset in general. I'm looking to build a new server using this board but would like to find some other experiences first. I've googled myself blue but haven't found any reviews or postings regarding this