similar to: problem with nut APC BackUPS RS 1500 (white)

Hello, i have this strange problem with APC BackUPS RS 1500 ? older one model, white one under windows in powerchute is device OK, working everything ok selftest ok, just ordinary ups. under CentOS 7 minimal (CentOS-7-x86_64-Minimal-1708.iso) kernel version 3.10.0-693.el7.x68_64 driver version 2.7.2 i have this strange probem: nut driver didnt start automatically with error, after i enter in

maybe i have solved this issue, i unplugged APC BackUPS from USB 2.0 and PLUGGED INTO USB 3.0 and now it works prefectly at first time without any side effects, strange, this shoud be working since USB 1.0 so ups driver is configured OK, this config works ok for backups, this looks like there is no problem with detection of UPS but with USB driver or something around so simply if somebody has

I am having this problem where out of the blue my mouse and UPS will stop functiong. Once this even occurs I will find multiple messages like: Jan 15 10:40:32 nureyev kernel: drivers/usb/input/hid-core.c: control queue full Jan 15 10:40:42 nureyev kernel: drivers/usb/input/hid-core.c: control queue full iin /var/log/messages. The only way I can get the mouse and UPS back is to ssh into the

Hi Friends, I have an Excalibur 4GB USB Pen Drive Model Number EXC4. I think it is getting detected by the Centos but I am not sure about the mount point or the device point it is taking /dev/s?? Logs from /var/log/messages. Mar 11 11:30:06 l_l_box kernel: usb 1-1: USB disconnect, address 3 Mar 11 11:30:22 l_l_box kernel: usb 1-1: new high speed USB device using address 4 Mar 11 11:30:22

Howdy nut-users :) Got a problem with nut detecting my UPS. Here's my scenario. Base platform is a HP ML350 G6. UPS is an APC Smart-UPS 1000. Base OS is VMware ESXi 5.0 with all current patches. I've created a virtual machine using the VMWare supplied VMA. USB passthrough is configured to pass the UPS through to the VMA. So I essentially have a SLES 11 (x86_64) server with a USB

I have a MGE Evolution 3000 connected via USB to a linux server (HP Proliant G3). The server is running kernel 2.4.30 and nut-2.0.3. But before nut trying to connect to the UPS, I guess HID doesn't work as long as I get a message like this in dmesg: -------------------------------------------------- usb.c: new device strings: Mfr=4, Product=136, SerialNumber=50 usb.c: USB device number 2

Hi. Is the subject UPS model supported? I believe so, but I don't have a unit to test with. Any comments on this model? I'm trying to advise a colleague. Thank you, as always. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=051d ProdID=0003 Rev= 1.06 S: Manufacturer=American Power

--zhXaljGHf11kAtnf Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable I'm trying to set up a TrippLite Internet Office 750 just like this guy: http://lists.alioth.debian.org/pipermail/nut-upsuser/2005-June/000007.html Here's the output of a few interesting commands stuart@tyro:~+ dpkg-query -l nut nut-usb| tail -n2| awk

I can't seem to get an external DVD drive to show up on an CentOS 7 server. Wondering if it's just missing a driver or if I'm missing something fundamental. It's an external USB device that works fine on my Fedora 21 Laptop, but I never get a /dev/ entry (EG: /dev/sr0) on the server. What can I do to make this thing work? [root at norman ~]# tail -f /var/log/messages; #

i can't seem to get newhidups to detect my UPS.. i'm using nut-2.0.3 (tried both the rpm from fc5-updates and compiling my own) here is the entry for the UPS in /proc/bus/usb/devices T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0764 ProdID=0501 Rev= 0.01 S: Manufacturer=CPS S: Product=UPS

OS name and version, *CentOS release 6.10 (Final) Linux 2.6.32-754.3.5.el6.centos.plus.x86_64 #1 SMP Wed Aug 15 02:28:38 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux* exact NUT version Name : nut Arch : x86_64 Version : 2.6.5 Release : 2.el6 Size : 4.2 M Repo : installed >From repo : epel Summary : Network UPS Tools URL :

Hello, I have an UPS Hunnox HNX-650 (http://www.hunnox.com/), but it's not quite running yet with NUT. Any hints? Thanks... Some info: * lsusb: Bus 005 Device 003: ID 0001:0000 Fry's Electronics * usb-devices: T: Bus=05 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0001 ProdID=0000 Rev=01.00 S:

- UPS MGE Premium Ellipse Premium 1200 - SuSE Linux 10.0 OSS, kernel 2.6.13 smp - gcc version 4.0.2 20050901 (prerelease), glibc-2.3.5-40 - mgeups-psp-3.0.0-3, nut-2.0.2-4 - Dell Dimension 8400 with dual core Intel Xeon. 3.0GHz. lsusb shows: Bus 002 Device 003: ID 0463:ffff MGE UPS Systems UPS less /proc/bus/usb/devices shows for bus 2 device 3: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=

Hi, I'm trying to get a Powerware 3105 UPS working on SuSE 10.0. I have compiled nut from the current Subversion repository. This UPS uses the bcmxcp_usb driver. I cannot get the driver to find the ups on the USB bus. The error message I get is:- -------------- bcmxcp_usb -u nut -DDDDD -a pw3105 -------------------- Network UPS Tools - BCMXCP UPS driver 0.10 (2.1.0) debug level is

Hi, I have plug in this USB network device: > Bus 001 Device 002: ID 2001:1a02 D-Link Corp. > T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=2001 ProdID=1a02 Rev= 0.01 > S: Manufacturer=D-Link > S: Product=DUB-E100 > S: SerialNumber=E5ECEB > C:* #Ifs= 1 Cfg#= 1

Hi, I have a Liebert POWERSURE PSP connected via USB. Cleanly built and installed from source nut-2.4.3.tar.gz using kernel 2.6.30.5 #cat /proc/bus/usb T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=10af ProdID=0003 Rev= 0.00 S: Manufacturer=Liebert S: Product=Liebert PSP 350 FW: 02 S:

... T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=06da ProdID=0002 Rev= 1.00 S: Manufacturer=Powerware S: Product=Powerware UPS C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 60mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=usbfs E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=20ms ... Should the kernel

Hi, I always had problems that my Smart-UPS 1500 had "hickups" with nut: Connection would get lost, just to get restored seconds later again. This resulted in annoying log entried and console messages but wasn't too critical. For a few days, nut doesn't detect my UPS at all any more. I get the console messages: Broadcast message from nut at server (somewhere) (Tue Oct 29

Hi, I always had problems that my Smart-UPS 1500 had "hickups" with nut: Connection would get lost, just to get restored seconds later again. This resulted in annoying log entried and console messages but wasn't too critical. For a few days, nut doesn't detect my UPS at all any more. I get the console messages: Broadcast message from nut at server (somewhere) (Tue Oct 29

Hi, I'm new to NUT. I've installed Fedora 8 and NUt along with it. I'm now having a go at getting my Unitek Alpha 1200sx UPS to work and shutdown the box automatically. I know this isn't officially supported but I'm trying my luck... I've seen that other Unitek UPSs use the 'megatec' driver however I'm unsure whether this will do the trick. My UPS comes with a