similar to: Eaton PW9130 1500VA-T with netxml-ups driver

There is a problem with the installation and running NUT under AIX. There is IBM server with AIX 7.1 and IBM 11000VA LCD 5U Rack UPS (Eaton) with network management card. This configuration uses driver netxml-ups. NUT installed with neon and netxml-ups. When triyng to start driver netxml-ups has the following output: Could not load program ./netxml-ups: Symbol resolution failed for

Hi all, some time ago I bought at discount price a NMC for managing a few computers using the programmable outlets features available on my MGE Evolution, unuseful otherwise (ATM). However, expecially for my server machine, I don't like very much the NSM client provided by MGE/Eaton and I'd rather use only NUT from my distribution. So, looking at the netxml-ups driver, I started adding

On Jul 17, 2013, at 11:27 AM, Matt Ivie wrote: > I'm really just looking for a UPS that might run a couple of small > servers and other small devices(routers or switches). Good call on including the network gear in the power budget. NUT isn't much use to the slave systems if the network connection between master and slave goes down. > If I could get > 15-30 minutes of

hi, does samba 3.0.14 supports terminal server profiles? If not, is it planned? Regards, Alex -- ***************************************************** Alexander F?disch - Central IT Department- Max Planck Institute for Evolutionary Anthropology Deutscher Platz 6 D-04103 Leipzig Germany Email: foedisch@eva.mpg.de Phone: (+49) 0341 3550-168 Fax: (+49) 0341 3550-119

Hi, I want to use the module VFS_FAKE_PERMS for roaming profiles. When I use the option "writeable = yes" (see config [1]) the user profiles are write back the server (but they shouldn't, right?). If I delete the writeable-option (see [2]) windows brings an error when logging off: "Windows cannot update your roaming profile. Possible causes of this error include network

Hello, does this bug still exists: http://web.archiveorange.com/archive/v/IPyW4fzzpEetiWKnJyfJ ? It seems that I have the same problem, although "store dos attributes" is set (Samba 3.6.18; GPFS 3.5.0-11). Here my share definition: [shared] comment = <comment> path = <path> available = yes

Citeren Arjen de Korte <adkorte-guest op alioth.debian.org>: > Author: adkorte-guest > Date: Wed Nov 11 10:44:46 2009 > New Revision: 2102 > > Log: > Properties changed > > Modified: [...] > trunk/drivers/netxml-ups.c Oops, this accidentally slipped in as well. This update changed the behavior of the netxml-ups driver to allow a NSM-client only mode. In

On Wed, 2013-07-17 at 23:33 -0400, Charles Lepple wrote: > On Jul 17, 2013, at 11:27 AM, Matt Ivie wrote: > > > I'm really just looking for a UPS that might run a couple of small > > servers and other small devices(routers or switches). > > Good call on including the network gear in the power budget. NUT isn't much use to the slave systems if the network

Matt Ivie wrote, On 7/31/2013 8:14 AM: > On Wed, 2013-07-17 at 23:33 -0400, Charles Lepple wrote: >> On Jul 17, 2013, at 11:27 AM, Matt Ivie wrote: >> >>> I'm really just looking for a UPS that might run a couple of small >>> servers and other small devices(routers or switches). >> Good call on including the network gear in the power budget. NUT isn't

Hello, we try to use Network UPS tools to monitor a network connected Eaton 93PS UPS. It basically works but we get frequent "Data is stale - check driver" warnings with a "data is no longer stale" shortly after in the log. We tried both snmp-ups and netxml-ups driver and both raise the same error. If have captured the communication between nut and UPS but all

I can''t figure out how to get the collection_select to correctly identify and select the appropriate option in the drop down to begin with. i have checked that charge.offense_level contains the correct value to begin with (a number between 1 and 10) but the view still defaults to the first option and not the one contained in the charge.offense_level. what am i doing wrong? any

Recent work on the netxml-ups driver made me realize that it would be very useful to be able to dynamically add/remove file descriptors we want to monitor for activity (instead of just a single extrafd). We'll probably also need this, in order to support asynchronous I/O in libusb-1.0. The latter would be a huge improvement over the existing libusb-0.1 (compatibility) interface

Hello all, Thanks to early feedbacks from Dmitry Ogorodnikov, we have made a new Windows package of NUT with previously missing DLLs allowing to run netxml-ups and snmp-ups drivers as well as nut-scanner tool. You can find it at : http://www.networkupstools.org/source/2.6/NUT-Installer-2.6.3-3.msi Please send feedback to the list. Regards, Fred -- Eaton Opensource Team -

Jim Klimov via Nut-upsuser <nut-upsuser at alioth-lists.debian.net> writes: > Upsmon as such has no need for XML (libneon et al); that would be > nut-scanner and the Eaton NetXML protocol driver. Sure, but it is normal for packaging systems to build the entire project, so that whatever someone wants is available, and thus depend on the union of the dependencies. That's what

Further analysis it looks like the status string matches the q1 subdriver but a lowercase "f" is sent to request it instead of "Q1\r". What do you think? ---------- Forwarded message ---------- From: "Matthew Wire" <devel at mrwire.co.uk> Date: 30 Aug 2016 22:51 Subject: powercool 1500VA USB UPS To: <nut-upsuser at lists.alioth.debian.org> Cc: I have

I have recently purchased a powercool 1500VA UPS (this one: https://www.cclonline.com/product/106782/PC-1500VA/UPS-Battery-Backup/Powercool-Smart-UPS-1500VA-3-x-UK-Plug-3-x-IEC-RJ45-x-2-USB-LCD-Display/UPS0171/?gclid=Cj0KEQjw3ZS-BRD1xu3qw8uS2s4BEiQA2bcfMwMPzsshzLqNK3E8NoAKQ6PPWRW589_zkYZ5YZDInb4aAuqK8P8HAQ ). It comes with software for windows/linux called UPSmart1.5 which connects and monitors

Hi Arjen, there is a small glitch with r1376: upsd.c: In function ?mainloop": upsd.c:857: warning: too few argument for the format 2008/3/18, Arjen de Korte <adkorte-guest at alioth.debian.org>: > Author: adkorte-guest > Date: Tue Mar 18 19:59:15 2008 > New Revision: 1376 > ... > + if (ret == 0) { > + upsdebugx(2, "%s: no data

I also operate an HP T1500 G3 which it's an Eaton made UPS. Connected on usb i get frequent communication errors and data aquisition stopped. Mine has a serial connection, also. Operating via serial has no trouble. Maybe it's something related to usb setting in bios, i.e. Legacy mode, speed setting, etc. However on serial mode looks like the eaton or hoe power protector software does not

Packaging issues would be brought up with the distro... I have recently worked with Homebrew on a Mac VM for the CI farm, but otherwise have no clue about the ecosystem. Last saw/touched a physical Mac in school, 1994 or so :D Upsmon as such has no need for XML (libneon et al); that would be nut-scanner and the Eaton NetXML protocol driver. On Wed, Aug 21, 2024, 18:59 Heath Smith via Nut-upsuser

Well, NUT does "since forever" have reference docs on packaging into 8 or so entities each with its dependency tree, so heavy stuff can be pulled in on a need-to-have basis. As anything, it can be improved and updated, but it is there and many systems follow it. Those who missed the memo... the onus is on them. The `nut-scanner` tool (and its lib) design using run-time `dlopen()` of