similar to: Unable to use nut-2.7.4 with Eaton 5E1500I USB

On 06/19/2017 05:33 PM, Charles Lepple wrote: > On Jun 19, 2017, at 4:27 AM, Manuel Wolfshant wrote: >> 1.014501 [D2] Unable to get HID descriptor (Pipe error) >> 1.014511 [D3] HID descriptor length (method 1) -1 > So at this point in the logs, the kernel USB HID driver is detached from the UPS HID interface (until the UPS USB cable is unplugged and reattached). If

On 06/20/2017 02:27 AM, Charles Lepple wrote: > On Jun 19, 2017, at 10:45 AM, Manuel Wolfshant wrote: >> #lsusb -vvv -d 0463:ffff >> >> Bus 002 Device 012: ID 0463:ffff MGE UPS Systems UPS > ... >> HID Device Descriptor: >> bLength 9 >> bDescriptorType 33 >> bcdHID 1.10

On Jun 19, 2017, at 7:56 PM, Manuel Wolfshant wrote: > > On 06/20/2017 02:27 AM, Charles Lepple wrote: >> On Jun 19, 2017, at 10:45 AM, Manuel Wolfshant wrote: >> >>> #lsusb -vvv -d 0463:ffff >>> >>> Bus 002 Device 012: ID 0463:ffff MGE UPS Systems UPS >>> >> ... >> >>> HID Device Descriptor: >>>

Hi Manuel 2017-06-07 14:40 GMT+02:00 Charles Lepple <clepple at gmail.com>: > On Jun 7, 2017, at 5:47 AM, Manuel Wolfshant <wolfy at nobugconsulting.ro> > wrote: > > > > If that matters, the OS is a fully updated CentOS 6.9 and this > (latest stable ) version of nut was packaged by me. The problem appears on > any of the USB ports ( well, I tried the 2 in

On Jun 19, 2017, at 10:45 AM, Manuel Wolfshant wrote: > > #lsusb -vvv -d 0463:ffff > > Bus 002 Device 012: ID 0463:ffff MGE UPS Systems UPS ... > HID Device Descriptor: > bLength 9 > bDescriptorType 33 > bcdHID 1.10 > bCountryCode 33 US > bNumDescriptors 1 >

I was unable to setup |nut| on a server for the UPS Eaton 5E with USB connection. All results what did I get was that driver is not running and UPS is not recognized. What kind of driver is suitable for me and what kind of settings? Unit is Eaton 5E. result of |$ lsusb -v| |Bus 004 Device 007: ID 0463:ffff MGE UPS Systems UPS Device Descriptor: bLength 18 bDescriptorType

Hi NUT Users, One of my APC UPS is having battery issue and apparently we cannot change battery in that UPS. (not super green?) I have purchased an EATON UPS and added the ref in ups.conf When restarting the driver, I got this error > 0.030612 [D2] Checking device 2 of 10 (0463/FFFF) > 0.287659 [D2] - VendorID: 0463 > 0.287853 [D2] - ProductID: ffff >

I recently purchased a UPS from http://www.microcenter.com/product/470131/5E_1,100W_2,200VA_6-Outlet_UPS It's sold as an Eaton 5E 1,100W 2,200VA 6-Outlet UPS SKU: 147140 Mfr Part #: 5E2200USB-LA UPC: 743172064875 "The Eaton 5E is an essential line interactive UPS that provides cost effective and reliable power protection against power outages and bad power quality. Thanks to its small

On 06/19/2017 11:02 AM, Manuel Wolfshant wrote: > Thank a lot ! > Now, conclusions after attempting builds ( with no docs included since > attempting to enable them triggers the errors related to missing or > too old tools mentioned by me in an earlier message ) > - building against libsub 1.0 triggers the following 2 errors : > nutdrv_qx-nutdrv_qx.o: In function

It seems that the UPS I bought is actually served by the blazer_usb driver. USB ids 06da:0003 (lsusb DB thinks it's a "Phoenixtec Power Co., Ltd 1300VA UPS", but this has apparantly been re-used by Eaton 5E2200USB-LA) It's sold as an Eaton 5E 1,100W 2,200VA 6-Outlet UPS SKU: 147140 Mfr Part #: 5E2200USB-LA UPC: 743172064875

2017-06-13 17:49 GMT+02:00 Manuel Wolfshant <wolfy at nobugconsulting.ro>: > On 06/13/2017 05:48 PM, Arnaud Quette wrote: > > Hi Manuel > > > Hi Arno > > Hi Manuel > > > 2017-06-07 14:40 GMT+02:00 Charles Lepple <clepple at gmail.com>: > >> On Jun 7, 2017, at 5:47 AM, Manuel Wolfshant <wolfy at nobugconsulting.ro> >> wrote:

Following the instructions a following site I can not get nut to work with my UPS. http://bernaerts.dyndns.org/linux/75-debian/335-debian-wheezy-install-monitor-eaton-ups Hope that you can find out what is wrong by the provided info in the email Best Regards, Magnus Karlsson # lsusb -s 001:005 -v Bus 001 Device 005: ID 06da:0002 Phoenixtec Power Co., Ltd UPS Device Descriptor: bLength

On Oct 25, 2016, at 8:08 PM, Michael Evans wrote: > > It seems that the UPS I bought is actually served by the blazer_usb driver. > > USB ids 06da:0003 (lsusb DB thinks it's a "Phoenixtec Power Co., Ltd 1300VA UPS", but this has apparantly been re-used by Eaton 5E2200USB-LA) > > It's sold as an Eaton 5E 1,100W 2,200VA 6-Outlet UPS > > SKU: 147140 Mfr

Hi, are this UPS supported by any other driver than "richcomm_usb". The device works with richcomm_usb, but only signals online, offline etc. Not voltage, batterylevels etc. Bus 006 Device 009: ID 0925:1234 Lakeview Research Bus 006 Device 009: ID 0925:1234 Lakeview Research Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10

Hi Manuel, 2017-06-14 15:16 GMT+02:00 Manuel Wolfshant <wolfy at nobugconsulting.ro>: > Hello > > > > On 06/14/2017 03:32 PM, Arnaud Quette wrote: > > > > On Jun 7, 2017, at 5:47 AM, Manuel Wolfshant <wolfy at nobugconsulting.ro> > wrote: > >> > >>> > If that matters, the OS is a fully updated CentOS 6.9 and this >>>

This is part UPS and part nut question. I had a (intentional) power outage. The UPS/nut properly shut the system down when battery was down to 20%. It ran for only 18 minutes rather than the expected 40 (see later). After it charged to 37% I removed power from the UPS. After 4-5 minutes the system shut down. However, when I restored power to the UPS the machine powered up immediately (no delay).

Hello, after an update I've got troubles with nut. It is not able to connect via usb to our UPS anymore. I dont know wether it is the nut update or the kernelupdate or both. In any case, it is difficult to get new rpms for CentOS. So if someone has an Idea, what I can try to solve this Problem: please help. Atached are relevant information. Best wishes, Hubert Krause My versions:

Hello list, ? ?Cannot make Evolution 850 to be recognized, maybe the problem is "Warning: incomplete endpoint descriptor" in lsusb? Details are as follows. NUT installed by download of debian package. Any ideas/suggestions are highly welcome, thanks in advance! --ValenteM = ? ?= ? ? = ? ? = Ubuntu server 12.04.1 LTS (GNU/Linux 3.2.0-35-generic x86_64) sudo dpkg -i

On Jun 19, 2017, at 4:02 AM, Manuel Wolfshant wrote: > On 06/18/2017 05:42 PM, Charles Lepple wrote: >> On Jun 16, 2017, at 6:12 AM, Manuel Wolfshant wrote: >>> >>> running autogen.sh was triggered automatically. but even if I do it explicitly, I still get: >>> + autoreconf -i

Linux-2.4.28 libusb-0.1.8 nut-2.6.5 [+most recent drivers from GIT] - from tarball EATON 3S700DIN [mfr.date 09/28/14] ---------------------------------- ISSUES: I) Too many kernel logs: --- In /var/log/kernel.log usbdevfs: usb_submit_urb returned -28 In /var/log/daemon.log: usbhid-ups[744]: libusb_get_interrupt: No error usbhid-ups[744]: libusb_get_interrupt: error submitting URB: No space left