similar to: [HCL] Cyber Power Systems CP1500AVRLCDa supported by usbhid-ups

[updated] OpenBSD 6.1/amd64 NUT 2.7.4p0 (from OpenBSD package) Results of upsc: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 2902 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 26.9 battery.voltage.nominal: 24 device.mfr: CPS device.model: CP1500AVRLCDa device.serial: CTHGN200xxxx device.type: ups driver.name:

Mike, Thanks for the info. I have enough to add an entry to the DDL, but I have a few more questions inline. On May 14, 2017, at 1:21 PM, Mike wrote: > > [updated] > > OpenBSD 6.1/amd64 > NUT 2.7.4p0 (from OpenBSD package) > > > Results of upsc: > > battery.charge: 100 > battery.charge.low: 10 > battery.charge.warning: 20 > battery.mfr.date: CPS Let

On May 22, 2017, at 11:13 AM, Mike <the.lists at mgm51.com> wrote: > > On 5/21/2017 10:39 AM, Charles Lepple wrote: >> >> Let me know if you're interested in figuring out if the battery.mfr.date value is stored somewhere else. > > Of course. The UPS is in production (ie., powering the servers in my > house), so it may be a few days before I can ~play~.

On 6/4/2017 4:46 PM, Charles Lepple wrote: [snip] >> 4) when I went down to 95 volts, the "AVR" kicked in to boost the >> voltage without going to battery. This was indicated by a "click" from >> the UPS and an indication on the UPS display. > > In non-explore mode, does the driver report the AVR status? (No need to set things back up if you have

On 5/21/2017 10:39 AM, Charles Lepple wrote: > Mike, > > Thanks for the info. I have enough to add an entry to the DDL, but I have a few more questions inline. > > On May 14, 2017, at 1:21 PM, Mike wrote: >> >> [updated] >> >> OpenBSD 6.1/amd64 >> NUT 2.7.4p0 (from OpenBSD package) >> >> >> Results of upsc: >> >>

On Jun 5, 2017, at 11:21 AM, Mike <the.lists at mgm51.com> wrote: > > Result of the command, where "n" is incremented in a loop: > > # usbconfig -u 1 -a 2 dump_string n > STRING_0x00 = 0x04, 0x03, 0x09, 0x04 > STRING_0x01 = <CP1500AVRLCDa> > STRING_0x02 = <CTHGN200xxxx> > STRING_0x03 = <CPS> > STRING_0x04 = <PbAcid> >

On Jun 3, 2017, at 2:21 PM, Mike <the.lists at mgm51.com> wrote: > > On 5/30/2017 10:47 PM, Charles Lepple wrote: >> On May 22, 2017, at 11:13 AM, Mike <the.lists at mgm51.com> wrote: >>> >>> On 5/21/2017 10:39 AM, Charles Lepple wrote: > [snip] > >> Even though the CPS sub-driver has been written already, I would like to take a look at the

Cyber Power Systems AVRG750U https://www.cyberpowersystems.com/product/ups/avrg750u/ upsc output: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 15360 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 24.0 battery.voltage.nominal: 24 device.mfr: CPS device.model: AVRG750U device.serial: <REDACTED> device.type: ups

On 5/30/2017 10:47 PM, Charles Lepple wrote: > On May 22, 2017, at 11:13 AM, Mike <the.lists at mgm51.com> wrote: >> >> On 5/21/2017 10:39 AM, Charles Lepple wrote: [snip] > Even though the CPS sub-driver has been written already, I would like to take a look at the raw "explore" mode output: > >

I didn't want to sign up for the nut-devs list or create a git account just to provide this information, so I hope posting this info here is OK... I just bought a Cyber Power Systems EC750G UPS for use as a spare. Here are some info for it: ========================= upsc output: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime:

Cyber Power Systems CP600LCD https://www.cyberpowersystems.com/product/ups/cp600lcd/ upsc output: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 2220 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 13.5 battery.voltage.nominal: 12 device.mfr: CPS device.model: UPS CP600 device.type: ups driver.name: usbhid-ups

CyberPower Battery Backup with Surge Protection, model LE825G Appears to function properly with the driver listed on the HCL for the Cyber Power Systems ups 2 685AVR USB (usbhid-ups). Tested with shutdown mode "UPS Goes On Battery" with a 5 second timer and the system successfully shutdown as expected. upsc output: upsc ups battery.charge: 100 battery.charge.low: 10

Cyber Power UPS Model LX1500GU *upsc output:* root at freenas:~ # upsc ups at localhost battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 5670 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 24.0 battery.voltage.nominal: 24 device.mfr: CPS device.model: LX1500GU device.serial: QAKGP2000252 device.type: ups driver.name:

On 12/8/2016 10:37 PM, Charles Lepple wrote: > On Dec 8, 2016, at 1:34 PM, Mike wrote: >> >> I didn't want to sign up for the nut-devs list or create a git account >> just to provide this information, so I hope posting this info here is OK... > > Not a problem. (Both lists go into the same mailbox on my end.) The important part is the "HCL" subject so I

On Dec 9, 2016, at 11:14 AM, Mike <the.lists at mgm51.com> wrote: > > On 12/8/2016 10:37 PM, Charles Lepple wrote: >> On Dec 8, 2016, at 1:34 PM, Mike wrote: >>> The result of the command >>> >>> upscmd -u user -p password myups load.off.delay 300 >>> >>> is an immediate power-off, no delay. >> >> Hmm. Certainly

Cyberpower CPS850avrlcd https://www.cyberpowersystems.com/product/ups/cp850avrlcd/ shutdown sequence: UNTESTED upsc output: _____  sudo upsc cp-ups battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 1230 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 13.5 battery.voltage.nominal: 12 device.mfr: CPS device.model: UPS

CyberPower Value 1500ELCD-RU root at ubuntu:/home/oper# upsc myups at localhost battery.charge: 87 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 5220 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 16.5 battery.voltage.nominal: 24 device.mfr: CPS device.model: Value1500E device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq:

[shutdown sequence] I have tested and verified the shutdown sequence works. [manufacturor] https://www.cyberpowersystems.com/product/ups/ec350g/ mbeisser at nas:~$ upsc ups Init SSL without certificate database battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 1575 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 9.3

On Dec 8, 2016, at 1:34 PM, Mike wrote: > > I didn't want to sign up for the nut-devs list or create a git account > just to provide this information, so I hope posting this info here is OK... Not a problem. (Both lists go into the same mailbox on my end.) The important part is the "HCL" subject so I can find it later. For anyone else who runs across this: you don't

CyberPower OR700LCDRM1U (http://www.cyberpowersystems.com/products/ups-systems/smart-app-ups/rackmount-lcd/OR700LCDRM1U.html) upsc output: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 6000 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 14.5 battery.voltage.nominal: 12 device.mfr: CPS device.model: UPS OR700