similar to: usbhid-ups: Failed to open device, skipping. (Permission denied)

Charles Lepple writes: > On Sun, Apr 2, 2017 at 2:59 AM, Sam Varshavchik <mrsam at courier-mta.com> > wrote: > > Having trouble configuring nut 2.7.4 on Fedora 25, with a new Tripp Lite > > UPS. > > > > I'm running XFCE, and XFCE's Power Manager sees the UPS just fine. lsusb > > gives: > > > > Bus 006 Device 002: ID 09ae:3016 Tripp

On Sun, Apr 2, 2017 at 2:59 AM, Sam Varshavchik <mrsam at courier-mta.com> wrote: > Having trouble configuring nut 2.7.4 on Fedora 25, with a new Tripp Lite > UPS. > > I'm running XFCE, and XFCE's Power Manager sees the UPS just fine. lsusb > gives: > > Bus 006 Device 002: ID 09ae:3016 Tripp Lite I'm still catching up on mail, so apologies if this was

On Aug 28, 2014, at 6:49 PM, Barry Skrypnyk <barry at skrypnyks.com> wrote: > I have searched the archives and googled this problem with usbhid-ups. I would really appreciate any help anyone could offer to solve the problem. > > System: Ubuntu 14.04.1 Trusty Tahr Which kernel version are you using? > Installed nut from Ubuntu repositories ? nut 2.7.1 > > Ups.conf file

I have searched the archives and googled this problem with usbhid-ups. I would really appreciate any help anyone could offer to solve the problem. System: Ubuntu 14.04.1 Trusty Tahr Installed nut from Ubuntu repositories - nut 2.7.1 Ups.conf file maxretry = 3 # user = nut [TrippLite] driver = usbhid-ups port = auto productid = 3016 desc = "Tripp Lite UPS,

http://bugs.freedesktop.org/show_bug.cgi?id=11441 Summary: Minor display corruption Product: xorg Version: 7.1 Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org ReportedBy: mrsam

See comments below. > -----Original Message----- > From: Charles Lepple [mailto:clepple at gmail.com] > Sent: Friday, August 29, 2014 5:35 AM > To: barry at skrypnyks.com > Cc: nut-upsuser at lists.alioth.debian.org > Subject: Re: [Nut-upsuser] Smart1500lcdt will not connect with usbhid-ups > > On Aug 28, 2014, at 6:49 PM, Barry Skrypnyk <barry at skrypnyks.com>

On Aug 29, 2014, at 2:02 PM, Barry Skrypnyk <barry at skrypnyks.com> wrote: > See comments below. > >> -----Original Message----- >> From: Charles Lepple [mailto:clepple at gmail.com] >> Sent: Friday, August 29, 2014 5:35 AM >> To: barry at skrypnyks.com >> Cc: nut-upsuser at lists.alioth.debian.org >> Subject: Re: [Nut-upsuser] Smart1500lcdt will

Tripp Lite SMART1300LCDT # upsc ups battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 30 battery.runtime: 2951 battery.type: PbAC battery.voltage: 0.0 battery.voltage.nominal: 24.0 device.mfr: Tripp Lite device.model: TRIPP LITE UPS device.serial: 2250AVLSM872100251 device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2

Greetings all, Anyone have a clue on this behavior (see below) on this behavior with FreeNAS-8.3.0-RELEASE-x64 (r12701M) on a TrippLite 1500LCD UPS? NUT version is 2.6.5 Using the following profile: Tripp-Lite ups 2 Smart1500LCD USB (usbhid-ups) I get the following: Dec 10 21:40:12 nas6 kernel: uhid0: <Tripp Lite TRIPP LITE UPS, class 0/0, rev 1.10/0.02, addr 2> on usbus1 Dec 10 21:40:12

I talked to Tripp Lite Technical support. Their policy is that they only support Fedora and SUSE. There is no one there that could help with Ubuntu or NUT issues. The only answer they could give me was to port the rpm files to Ubuntu and use them. This is way beyond my experience level. I will go to the local electronics store and buy a cheap USB 2 hub to see if that works. I will post the

Barry, I have had success with NUT on Debian and an EATON 5E2000IUSB-AU 5E 2000VA/1200W UPS With 3 x OUTLETS which I believe is good value. I would believe the the EATON ?5E 1500VA/900W UPS With 3 x OUTLETS would work just as well. The 1500VA also uses the same batteries as the 2000VA so I would believe it would run its raited load longer than 2000VA. My eight drive RAID driver uses less that

On Aug 7, 2013, at 10:43 AM, Matthew Lenz wrote: > Tripp Lite SMART1300LCDT > > # upsc ups [...] > battery.voltage: 0.0 > battery.voltage.nominal: 24.0 [...] > input.frequency: 5990.0 > input.transfer.high: 150.0 > input.transfer.low: 92.0 > input.voltage: 0.0 > input.voltage.nominal: 120 > output.current: 100.00 > output.frequency: 5990.0 >

# ldd /lib64/nut/usbhid-ups linux-vdso.so.1 (0x00007ffdfe3e3000) libusb-0.1.so.4 => /lib64/libusb-0.1.so.4 (0x00007f98526e6000) <-- from libusbp-compat-0.1.5-r2 libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f98524ca000) libc.so.6 => /lib64/libc.so.6 (0x00007f985212f000) libusb-1.0.so.0 => /lib64/libusb-1.0.so.0 (0x00007f9851f17000) <--

Hi List, I recently picked up a Tripp Lite SMART1500LCDT while they were on sale to pair with my home server, and have tried getting it set up with NUT, since it seems to be supported. I can get the whole NUT stack up and running, but the driver seems to only stay up for a couple minutes before crashing out. I've uploaded the level 6 debug output of the driver (with my serial number

On 9/10/2017 6:41 PM, Sam Varshavchik wrote: > Dutchman01 writes: > >> Hello all, >> >> ? >> >> I request a new NUT release as current dates back to March 9, 2016: NUT 2.7.4 >> >> The fact stays that not all distro?s use latest snapshots/commits from github >> dev tree. >> >> ? >> >> So please do release a new up to

Hi Everyone, I'm having trouble getting TrippLite SMX1500LCDT to work on FreeBSD 11.2, nut 2.7.4 installed from FreeBSD port. The debug output is rather big when I'm starting usbhid-ups initially, Please find that attached (gzipped to comply with message size limit). Subsequently, until I unplug and replug the USB cable, I'm geting a shorter debug output, like this: Network UPS

Here is what I get: # usbconfig -u 1 -a 3 dump_curr_config_desc ugen1.3: <Tripp Lite TRIPP LITE UPS> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA) Configuration index 0 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x0022 bNumInterfaces = 0x0001 bConfigurationValue = 0x0001 iConfiguration = 0x0000 <no string> bmAttributes =

I'm in the process of trying to get NUT to manage an APC SmartUPS. Monitoring of the UPS is working fine: $ upsc nutdev1 at localhost Init SSL without certificate database ambient.1.humidity.alarm.high: 60.00 ambient.1.humidity.alarm.low: 30.00 ambient.1.temperature.alarm.high: 40.00 ambient.1.temperature.alarm.low: 10.00 battery.charge: 94.00 battery.charge.restart: 0 battery.current: 0.00

> What does that revision number correspond to in FreeBSD release numbers? (e.g. 9.3, 10.0) FreeBSD 10.2-RELEASE #0 r286738M the last person probably wasn't able to give the ./configure probably because most people uses the precompiled iso to install NAS4Free.? if you need the ./configure I might have to look for their source on GitHub or something. /usr/local/libexec/nut/usbhid-ups -a

Here are all the usbconfig outputs you have requested. I have left a message with the Dev for NAS4Free to give up the ./configure for NUT portion.? I am hoping they will... usbconfig -u 0 -a 5 dump_device_desc? datanas: ~# usbconfig -u 0 -a 5 dump_device_desc ugen0.5: <TRIPP LITE UPS Tripp Lite> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA)? bLength = 0x0012 ? bDescriptorType =