similar to: Questions about Eaton 5E 1, 100W 2, 200VA 6-Outlet UPS

On Oct 25, 2016, at 8:08 PM, Michael Evans wrote: > > It seems that the UPS I bought is actually served by the blazer_usb driver. > > USB ids 06da:0003 (lsusb DB thinks it's a "Phoenixtec Power Co., Ltd 1300VA UPS", but this has apparantly been re-used by Eaton 5E2200USB-LA) > > It's sold as an Eaton 5E 1,100W 2,200VA 6-Outlet UPS > > SKU: 147140 Mfr

It seems that the UPS I bought is actually served by the blazer_usb driver. USB ids 06da:0003 (lsusb DB thinks it's a "Phoenixtec Power Co., Ltd 1300VA UPS", but this has apparantly been re-used by Eaton 5E2200USB-LA) It's sold as an Eaton 5E 1,100W 2,200VA 6-Outlet UPS SKU: 147140 Mfr Part #: 5E2200USB-LA UPC: 743172064875

Roman, I don't think I already asked, but could you post the output of lsusb -v -d 06da:0003 Just to be sure that we're not exceeding some buffer limitations of the device. Best regards, Arjen -- Please keep list traffic on the list

> On Oct 31, 2016, at 10:15 PM, Michael Evans <mjevans1983 at gmail.com> wrote: > > Are there any other tests I can perform or ways that I can help gather data to get the longer tests supported? > The "test.battery.start" command takes a parameter in seconds (defaults to 600): https://github.com/networkupstools/nut/blob/v2.7.4/drivers/nutdrv_qx_blazer-common.c#L286

I'm totally new to this, so heres hoping i can give you the info you need ... I have a new Trust usb UPS hooked up to my iMac (running Lion) The UPS shows up in the system report with the following info: Product ID: 0x0003 Vendor ID: 0x06da (Phoenixtec Power Co., Ltd.) Version: 5.01 Speed: Up to 1.5 Mb/sec Manufacturer: CTN Location ID: 0xfa144400 / 10 Current Available (mA):

I'm totally new to this, so heres hoping i can give you the info you need ... I have a new Trust usb UPS hooked up to my iMac (running Lion) The UPS shows up in the system report with the following info: Product ID: 0x0003 Vendor ID: 0x06da (Phoenixtec Power Co., Ltd.) Version: 5.01 Speed: Up to 1.5 Mb/sec Manufacturer: CTN Location ID: 0xfa144400 / 10 Current Available (mA):

I have an UPS, that claims to be IPPon Back Power Pro 700. I'm trying to connect it using USB. lsusb -v says: Bus 1 Device 3: ID 06da:0003 Phoenixtec Power Co., Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0

Hello, I have a Yunto e a Zanto ups connected with usb with id 06da:0002 and 06da:0601. I have seen that people had some success using megatec driver. But now megatec is replaced by blazer-usb and I am not able to use my upses under nut. Can you help me? Thanks! Mario

So, I have this Mustek Powermust 600USB (no serial port) here temporarily. It seems to be a hid device. The output from "lsusb -v" and "newhidups -DDDDD" (with "generic" and "vendorid=06da") are (respectively): ----------------------------------------------------------------------------------------------- Bus 001 Device 002: ID 06da:0003 Phoenixtec Power

I can't seem to get the longer battery tests to actually run: test.battery.start test.battery.start.deep Both appear to leave the battery voltage at line-power levels; while the quick test does have a notable voltage delta. Are there any other tests I can perform or ways that I can help gather data to get the longer tests supported? I borrowed a 60W light bulb (instead of one of the

On Wed, 9 Oct 2013 10:44:27 +0000 (UTC) Thorsten Glaser <tg at mirbsd.de> wrote: > Anil Singhar dixit: > > >Manual testing as provided within the package has been done with all > >tests passing. This includes the units tests available under > >usr/klibc/tests, usr/utils, usr/dash and usr/gzip. For dash and > >gzip, only sanity testing has been done. > >

I recently took over maintenance of a linux computer which is drawing power from a "Maruson Power Net 1500" UPS. However, there is currently no monitoring or control of the UPS by this (or any other) computer. Can nut control this device? There are serial, usb, and EPO connectors on the back of the unit. (There may be a manual but I'm going to have to hunt for it.) Thanks, David

Hello i tried to connect my netys 2000 pr ups to ubuntu 11.10 and i have a problem connecting it. After readin a few post i realized to dianosse the connection. I need help resolving the connextion issue So here is the response to??/lib/nut/usbhid-ups -u root -DDDDD -a netys: Network UPS Tools - Generic HID driver 0.35 (2.6.1) USB communication driver 0.31 ? ?0.000000 ? ? send_to_all: SETINFO

Following the instructions a following site I can not get nut to work with my UPS. http://bernaerts.dyndns.org/linux/75-debian/335-debian-wheezy-install-monitor-eaton-ups Hope that you can find out what is wrong by the provided info in the email Best Regards, Magnus Karlsson # lsusb -s 001:005 -v Bus 001 Device 005: ID 06da:0002 Phoenixtec Power Co., Ltd UPS Device Descriptor: bLength

Hello: I have a UPS model MXE II MAXIM brand online, 3500VA 2100W. Connects to the PC by a USB 2.0 port. I wanted to use nut, but this brand is not on the list of nut drivers. lsusb returns: ... Bus 003 Device 003: ID 06DA: 0201 Phoenixtec Power Co., Ltd ... I did not find this manufacturer in the driver list. Anyone know if you can have compatibility with other make and model of UPS. With

Wrap the command around an heredoc only if setarch needs to be used; otherwise the heredoc will not be run at all. Fix commit d875346ad441d4762455ea1b41d57ad6174d9b63. --- customize/customize_run.ml | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/customize/customize_run.ml b/customize/customize_run.ml index 2283272..9d97522 100644 ---

Hi BACKGROUND INFO:I have a new Eaton 5E 1100i USB UPS which their website claims is supported on Linux. They don't provide software for it for Linux, only for Windows.Referring links: https://www.eaton.com/za/en-gb/catalog/backup-power-ups-surge-it-power-distribution/Eaton_5E_UPS.html https://www.eaton.com/za/en-gb/skuPage.5E1100IUSB.specifications.html It was manufactured in May 2020

Hi nut-upsdev, I have just got OMRON BX35F. Only object files and usage information is included. Where should I start to help you to get it supported? Any interest in supporting it at all?

Could someone point me to documentation that provides a succinct and accurate description of the difference between interpolation using #{}, single quotes, and double quotes ? I imagine there''s a set of precedence rules that govern behavior if/when they''re mixed. I''d like to get clear on this. Thanks, Bill -------------- next part -------------- An HTML attachment was

Hi, Sometime ago [ June 2018 ] I posted a message about getting trying to get NUT to work with a Power Shield Defender 1200VA UPS. This model appears in the HCL at https://networkupstools.org/stable-hcl.html That UPS reported the following when queried using 'lsusb' on an iMac running macOS [ 10.15 ] Bus 001 Device 008: ID 0665:5161 Cypress Semiconductor USB to Serial Device Descriptor: