similar to: NUT UPS Slave Not Shutting Down

Hello NUT Team! I continue playing with NUT for Windows and USBHID-UPS driver I've got from Frederic to fix "Data Stale" problem. It seems there is something wrong when Network UPS Tools service is starting with disconnected USB cable. UPSMON is writing "Data Stale" to output and continue do it infinitely, even the cable is connected back. Here is a short log: Network

Hi, I have UPS Socomec ITYS 3000 with Netvision card. OS is Centos 6.5 64-bit. NUT installed with yum,. nut-2.6.5-2.el6.x86_64 nut-client-2.6.5-2.el6.x86_64 Why is ups.status empty? Here is upsc output: upsc myups at localhost battery.charge: 97.00 battery.runtime: -60.00 battery.voltage: -0.10 device.mfr: Net Vision v6.01 (SN 0101414290) device.model: ITYS 3 kVA device.serial: 3I14450043

I have a Raspberry PI that I have connected to a Deltec UPS via serial (upscode2 driver). I had an older version of Rasbian running. The nut configuration worked fine but I had mail issues I couldn't resolve when gmail changed how it handled MTAs. Plus it was running an old version of Deb that is no longer supported. It was broken enough I could not upgrade to a never version so I started from

Hi debian jessie, nut 2.7.2-4 APC Smart-UPS 1500 connected through USB, running nut driver usbhid-ups This UPS powers my switches, internet connection and my monitor server that monitors this and my other UPSes + runs smokeping and nagios. But recently a powerloss seemed to have shutdown my monitor PC immediately, so it did not shut down the other servers cleanly. Power seem to be lost

Hello First things first, thanks for great work with NUT. For years I used Informer compact 3kVA UPS http://www.informups.com/informer_compact.html with nut/megatec serial driver, but it stopped working when I switched to blazer_ser with 2.6.0 upgrade. I'm using 2.6.0 on gentoo. Blazer_ser seems to connect with UPS, but upsmon reports driver not connected. uname -a Linux localhost

Hi, I’ve posted my question on Superuser.com but not had any replies in 2 weeks, so I guess no-one there knows anything about NUT. https://superuser.com/questions/1441153/how-to-shutdown-macos-mac-osx-from-network-ups-tools-client-nut <https://superuser.com/questions/1441153/how-to-shutdown-macos-mac-osx-from-network-ups-tools-client-nut> I’m looking for help in shutting down my iMac on

Hello NUT Team! I am testing the early shutdowns in NUT 2.6.5-1 package for Windows (Windows 7 x64). My configuration files: upsmon.conf RUN_AS_USER upsmon MONITOR upsa at 192.168.10.200 1 upsmon pass master MINSUPPLIES 1 SHUTDOWNCMD "/sbin/shutdown -h +0" NOTIFYCMD "upssched.exe" POLLFREQ 5 POLLFREQALERT 5 HOSTSYNC 15 DEADTIME 15 POWERDOWNFLAG

Hello! I try use NUT on some servers. When i use this package on x64 Windows 2003 servers, upsmon hangs on with error: Faulting application upsmon.exe, version 0.0.0.0, faulting module upsmon.exe, version 0.0.0.0, fault address 0x0000458f. I try use another server, on 32-bit all is ok. Problem only on x64 platform (maybe in libusb)? And no different - upsmon master or slave. C:\Program Files

Here is patch 1 of 2. Roger diff -rup nut-2.7.4.orig/clients/upsmon.c nut-2.7.4.dev/clients/upsmon.c --- nut-2.7.4.orig/clients/upsmon.c 2015-12-29 13:08:34.000000000 +0100 +++ nut-2.7.4.dev/clients/upsmon.c 2016-07-01 09:46:21.567766415 +0200 @@ -525,6 +525,18 @@ static int get_var(utype_t *ups, const c numq = 2; } + /* Subcommands for polling SIGUSR1, SIGUSR2 RP */ + if (strcmp(var,

Hi Charles, Thanks for your help. Seems to be mostly ok except am getting error access denied. See below. I see from searching this is a common error but so far I can't find a fix. This is how I configured things before make and install. created group nut nut:x:103: created system user ups with group nut. ups:x:123:103::/home/ups:/bin/bash Create statepath directory. sudo mkdir -p

Hello We have an Socomec Sicon Netys PR3000 UPS equipped with NetVision Web/SNMP adaptor. I try to monitor the ups using snmp-ups driver and netvision mibs set. The snmp-ups driver starts correctly and connects to the UPS, upsd confirms it, but upsmon constantly shows "No communication" error I think the cause is the SNMP adapter reports the UPS status as "ECO mode"

Hi All, I'm trying to shutdown my UPS using NUT driver version upsdrvctl -V Network UPS Tools - UPS driver controller* 1.01-906.* My UPS details are the following : battery.charge: 100 battery.charge.low: 5 battery.charge.warning: 50 battery.runtime: 22980 battery.runtime.low: 120 battery.type: PbAc battery.voltage: 26.8 battery.voltage.nominal: 24.0 *device.mfr: American Power Conversion*

Hello! I tried NUT 2.6.5-1 (Windows port) with my APC Back UPS ES. It seems I have configured NUT properly, nut-scanner found my UPS: [nutdev1] driver = "usbhid-ups" port = "auto" vendorid = "051D" productid = "0002" product = "Back-UPS ES 525 FW:851.t3.I USB FW:t3" serial = "8B0745R23575

One disadvantage of handling it through a script is that is will not be done by default. Most users probably don't know about the problem of burning batteries, as it is not very common. A potential problem with Eric Wilde's patch is that it is not general enough; some UPS models have an boolean OVERHEAT flag although they don't report the actual temperature. So the UPSOVERTEMP

Hello list members, I am running NUT 2.0.1 on an OpenBSD 3.8 system, using the OpenBSD port for net-snmp-5.1.2p2. The UPS is connected via an AP9606 Web/SNMP card with current firmware, and the LAN. All goes well for a long time, usually more than one month. Then the system starts spitting messages about losing communications with the UPS. A second message about reconnecting follows immediately.

I use the NUT RPM package for CentOS 6.7, which is version 2.6.5-2. I am testing implementation of NUT features with APC and Tripp-Lite USB UPS interfaces. Things are going reasonably well. However, I'm seeing many more messages than I would like in /var/log/messages when I boot the system without the UPS connected. I have configured NOCOMMWARNTIME 3600, which takes care to only broadcast

greetings, has anyone had luck with the UPS portion of the shipping gem? i get nil''s returned for price, wondering what i''m missing. to avoid all confusion i included the account/login in the instantiation (sub with real values). @ups = Shipping::UPS.new :ups_account => ''7B4F74E3075AEEFF'', :ups_user => ''username'', :ups_password

Hello, I want to create php rate script and I'm using Deadagi. But I allways get billsec 0 , or nothing. Can you help me to solve this problem... My extension.conf: exten => _123,1,DeadAgi(rate.php) exten => _123,2,hangup And my simple test php script rate.php #!/usr/local/bin/php -q <?php include_once (dirname(__FILE__)."/phpagi.php"); $AGI = new AGI();

?Hello, There is a new intermediate Windows binaries release available at : http://www.networkupstools.org/package/windows/NUT-Installer-2.6.5-3.msi This fixes a regression about stopping the NUT service. Feedback is highly appreciated. Regards, Fred -- Eaton Opensource Team - http://opensource.eaton.com ----------------------------- -----------------------------