similar to: ups.status don't switch to "OB LB"

[apparently the list didn't get the message, probably because it exceeds the 40kb threshold, so here it is in all its glory with my reply] On Mon, 3 Sep 2018 at 14:32, Gabriele TAORMINA <gabriele.taormina at legrand.com> wrote: > > Dear Daniele, > > > "I fixed a few issues, and pushed your changes (amended) to this > > temporary branch:

> sorry for the delay, I forgot to put the automatic response (I was on holiday), here's a description of what we made and the drivers we used to start from: No problem for the delay... I fixed a few issues, and pushed your changes (amended) to this temporary branch: https://github.com/zykh/nut/tree/issue-441+legrand Let me know if I misunderstood anything... > - usbhid-ups --> we

[forwarded without attachments, for real this time] > Begin forwarded message: > > From: Gabriele TAORMINA <gabriele.taormina at legrand.com <mailto:gabriele.taormina at legrand.com>> > Subject: Re: [Nut-upsdev] Adding drivers to NUT? > Date: August 27, 2018 at 6:03:55 AM EDT > To: Daniele Pezzini <hyouko at gmail.com <mailto:hyouko at gmail.com>> >

Dear Daniele, nice to meet you, I'm a collegue of Gabriele. The problem with "blazer_usb" driver ("blazer_ser" works correctly) is related to the following commands: - "F" and "I": when the KRAULER subdriver check these UPS answers it uses wrong constants to check the lenght of the received packets, so these commands are considered as "not

Hi, I'm setting up NUT on a raspberry pi 4, following the guide here: https://melgrubb.com/2016/12/11/rphs-v2-ups/ OS version: Raspian Buster NUT version: 2.7.4.8 Installed via: apt package install Device: Legrand Keor Multiplug connected via USB The problem I am experiencing is that *NOTIFYCMD* never runs. I can connect to the device via *upsc*, and I receive WALL messages when I connect

>I just went through the same issue. Take a look at my thread. >Double check that upsmon.conf:NOTIFYCMD /sbin/upssched is not still commented. Thanks for the response, can you link to it? I'm not finding it in the search. I'm not using /sbin/upssched, I have NOTIFYCMD set up as: NOTIFYCMD /home/pi/Documents/scripts/ups-log.py and it's not commented out. On Tue, Feb 11, 2020

I just went through the same issue. Take a look at my thread. Double check that upsmon.conf:NOTIFYCMD /sbin/upssched is not still commented. On Tue, Feb 11, 2020 at 7:00 AM <nut-upsuser-request at alioth-lists.debian.net> wrote: > Send Nut-upsuser mailing list submissions to > nut-upsuser at alioth-lists.debian.net > > To subscribe or unsubscribe via the World Wide

> When you run that command, does "some text" appear in the system log? When I run Documents/scripts/ups-log.py manually I do see the expected text echo'ed to the command line. It actually appends to a Google Sheet, not the internal log files. When I would expect to see it triggered by NOTIFYCMD, I don't see any text printed and nothing shows up at the google sheets. If

Hello folks, I have a question regarding a sweex product. Its bundled with UPSmart v 2.12. I installed nut accordingly to the user manual included in the software. A quick check of data/drivers.list revealed to me i should use the: "Sweex" "500/1000" "contact closure - shipped with UPSmart" "genericups upstype=7" driver this driver

Good morning, my name is Stefano Pongiluppi and I'm a Legrand marketing manager, specialized in UPS management systems. About two years ago, my ex colleague Gabriele Taormina, that was in touch with Daniele Pezzini, sent to you the drivers for Legrand UPS (a copy of them are in attachment), but I see that these drivers are not yet included in the Master branch of the NUT project. Could you

Dear Admin, I'm working for Legrand UPS and i would like to know the correct procedure to send you some drivers source files to be added in the NUT software, this to extend support also to our UPSs. Thanks in advance, waiting for a response! Best Regards, Gabriele Taormina UPS Strategic Business Unit Field Application Engineer Phone: +39 0522/207046 Fax: +39 0522/207005

I am using nut 2.2.2 and I have a CyberPower CP550SL. According to the drivers list, I should be using genericups with upstype set to 7, but when I try that and when I run upsc I get: driver.name: genericups driver.parameter.LB: 04 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ups driver.parameter.upstype: 7 driver.version: 2.2.2 driver.version.internal: 1.34 ups.mfr: CyberPower

I am using nut 2.2.2 and I have a CyberPower CP550SL. According to the drivers list, I should be using genericups with upstype set to 7, but when I try that and when I run upsc I get: driver.name: genericups driver.parameter.LB: 04 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ups driver.parameter.upstype: 7 driver.version: 2.2.2 driver.version.internal: 1.34 ups.mfr: CyberPower

Hi, i need to draw a plot with means of values, reading a table from datafile. Example of datafile: Days Weight 0 178.00 0 250.00 0 242.00 0 239.00 0 223.00 0 188.00 0 237.00 0 212.00 0 273.00 0 191.00 0 173.00 0 233.00 0 227.00 0 253.00 0 232.00 4 177.00 4 249.00 4 241.00 4 238.00 4 222.00 4 188.00 4 236.00 4 211.00 4 272.00 4 190.00 4 172.00 4 232.00 4 226.00 4 252.00 4 231.00 if i use

Dear Daniele, I have some news regarding the Driver: I applied the patch you sent me (https://github.com/zykh/nut/tree/issue-441) and it works correctly (obviously in Level 5 of Debug I see "missing CR...etc.."). As for now there are 2 modification I'd like to suggest you: - For Online Type UPSs the Megatec protocol describes that the battery voltage is provided in the form of V

Dear Daniele, thanks a lot for your support, i have some things that are not so clear for me: - I can send you the whole sources for our UPSs, do you need only Headers and C files or also other files (i suppose Driver list)? - Seen that we had some problems with the Blazer driver (the battery voltage calculation were not correct for our UPSs) we copied it and modified a bit while changing the

hello, i've got a problem with the notifycmd here is a part of my upsmon.conf : NOTIFYCMD /usr/local/ups/bin/nut_notify NOTIFYMSG ONLINE "UPS %s is getting line power" NOTIFYMSG ONBATT "UPS %s is on battery" NOTIFYMSG REPLBATT "The UPS %s battery is bad and needs to be replaced" NOTIFYMSG LOWBATT "UPS %s is being shutdown by the master" NOTIFYMSG FSD

Dear Daniele, i understand perfectly, i'd like to explain you why we choosed to clone the blazer_usb driver: some of our devices uses Voltronic Q1 protocol and we tried the Krauler Subdriver (it was the one with the right "commands", Q1, F, etc.), but the issues were 2: - first: the Krauler Subdriver expects a different number of bytes in answer because in debug i see "Short

Hi! Have a similar issue with one of our customers having HP R12000/3 UPS with AF430A card. Upsmon shows the UPS as Online, on Battery and Battery discharging at the same time: [root at smrsrvslv06 lib64]# upsc hpups at localhost ambient.temperature: 19.0 ambient.temperature.high: 0.00 ambient.temperature.low: 0.00 battery.charge: 94.00 battery.current: 0.00 battery.runtime: 4620.00

Hello, I would like to monitor my UPS Legrand Niky S from a Raspberry Pi3 but I have not found it in the compatibility list. Has anyone been able to monitor an UPS Legrand using NUT? Your help would be greatly appreciated. Thanks, Daniele