Displaying 8 results from an estimated 8 matches similar to: "need help for shutdown (windows)"
2014 Nov 05
1
blazer_usb disconnects
I'm running Ubuntu 14.04.1 with nut 2.7.1-1ubuntu1, using a
Powerwalker/INNO TECH ups.
It used to working fine, but lately blazer_usb just executes a few commands
and then terminates with a "Got disconnected by another driver" message.
Any suggestions?
Example output from blazer_usb with loads of debug:
# /lib/nut/blazer_usb -DDDDDDDDDDDDDDDDDDDDDD -a nasups
Network UPS Tools -
2011 Sep 28
0
[BUG] nut 2.4.3+: UPS EP-1K: Firmware fault: USB-Interface crashes with nut.org monitoring if driver polling time <15 sec
@fsp
Please forward to development, manufacturing and quality management department:
Model EP1000(PPF6000/100), 431107300095, 4711140480534, Art-Nr. 8296861, 70539, 14Z00000, 35-0200116-01G
@nut-users
http://www.networkupstools.org/ 2.4.3 debian stable, 2.6.2 upstream, linux 2.6.38-debian-bpo
# /usr/local/src/nut-2.6.2/drivers/blazer_usb -u root -DDDDD -a ups
Network UPS Tools - Megatec/Q1
2013 Nov 22
1
nutdrv_qx does not support UPS, blazer_ups does
Hello All,
I tested our new UPS yesterday. I noticed that while the blazer_ups
drivers support this device, the newer nutdrv_qx does not. I suppose
that this should not be the case, as nutdrv_qx will replace blazer_ups(?).
Versions:
I installed Nut on Ubuntu 13.10 (64 bit) from the standard package
(2.6.4-2.3ubuntu2), and I also installed from the source tarball
(2.7.1), into a different
2011 May 01
2
nut problem on boot/restart
hi!
When I turn on my pc everything works fine, but if I restart fails (I'm not sure if this is true at 100%)?(then, i can do 'sudo /etc/init.d/nut restart' and it works)
But what is certain is that sometimes when start up the pc it works and sometimes fails, can be a problem with the start time (i have a fast ssd) and the initialization of the driver and the usb port?
thanks!
syslog:
2017 Jun 10
2
Help with Elite 800VA usb UPS
>
> hmm, apparently the UPS doesn't close the replies to our queries with
> the expected CR and we (I) did not consider that case in nutdrv_qx --
> noted:
> https://github.com/networkupstools/nut/issues/441
>
> But blazer_usb, being less strict on the terminating CR of Q1 replies,
> should work with your device.
>
> > root at artu:~# upsc Elit at artu
> >
2009 Mar 17
2
blazer_usb - short reply
Hello!
I'm trying to use nut with a Ippon Smart Winner 3000 UPS
(http://shop.key.ru/photo/items/45535.jpg) which looks like a
custom-labeled OEM model of the megatec branch.
I tried both the megatec_usb and the blazer_usb drivers for it, with a
obvious config section:
[ippon]
driver = blazer_usb
port = auto
vendorid = 06da
productid = 0003
desc = "Ippon Smart Winner 3000"
If I
2010 Dec 29
2
Again me :)
Dears,
I finally resolve my problem, I just make symbolic link:
[test at box var/run/]# ln -s -T /var/state/ups/ nut
Now I finally got services online:
# /sbin/service ups start
Starting UPS driver controller: [ OK ]
Starting upsd: [ OK ]
Starting UPS monitor (master): [ OK ]
BUT, on upsc I
2017 Jun 09
2
Help with Elite 800VA usb UPS
Use the name from ups.conf in front of "@localhost".
?The re?sult is quite different ;)
root at artu:~# upsc Elit at artu
Init SSL without certificate database
Error: Driver not connected
> What if you try nutdrv_qx without specifying megatec? (It should
> autodetect.)
>
?Here is the result:
?
root at artu:~# upsdrvctl start
Network UPS Tools - UPS driver controller