similar to: I/O errors with usbhid-ups and Tripp Lite SMART1500LCDT

[please use reply-all to include the list - the NUT lists do not add a reply-to header.] On Oct 23, 2015, at 2:03 AM, Null <null at wuffleton.com> wrote: > > Hi List, > > I recently picked up a Tripp Lite SMART1500LCDT while they were on sale to pair with my home server, and have tried getting it set up with NUT, since it seems to be supported. I can get the whole NUT stack up

On 2015-10-23 5:42, Charles Lepple wrote: > So the interesting part is that I was testing the master branch yesterday (same commit) on an older Debian box (3.16 kernel). The driver had trouble starting, but once it got going, it has been running continuously. > > I'm not really sold on this approach (due to the testing needed on other hardware), but this pull request reworks the USB

On Aug 28, 2014, at 6:49 PM, Barry Skrypnyk <barry at skrypnyks.com> wrote: > I have searched the archives and googled this problem with usbhid-ups. I would really appreciate any help anyone could offer to solve the problem. > > System: Ubuntu 14.04.1 Trusty Tahr Which kernel version are you using? > Installed nut from Ubuntu repositories ? nut 2.7.1 > > Ups.conf file

On Aug 29, 2014, at 2:02 PM, Barry Skrypnyk <barry at skrypnyks.com> wrote: > See comments below. > >> -----Original Message----- >> From: Charles Lepple [mailto:clepple at gmail.com] >> Sent: Friday, August 29, 2014 5:35 AM >> To: barry at skrypnyks.com >> Cc: nut-upsuser at lists.alioth.debian.org >> Subject: Re: [Nut-upsuser] Smart1500lcdt will

See comments below. > -----Original Message----- > From: Charles Lepple [mailto:clepple at gmail.com] > Sent: Friday, August 29, 2014 5:35 AM > To: barry at skrypnyks.com > Cc: nut-upsuser at lists.alioth.debian.org > Subject: Re: [Nut-upsuser] Smart1500lcdt will not connect with usbhid-ups > > On Aug 28, 2014, at 6:49 PM, Barry Skrypnyk <barry at skrypnyks.com>

I have searched the archives and googled this problem with usbhid-ups. I would really appreciate any help anyone could offer to solve the problem. System: Ubuntu 14.04.1 Trusty Tahr Installed nut from Ubuntu repositories - nut 2.7.1 Ups.conf file maxretry = 3 # user = nut [TrippLite] driver = usbhid-ups port = auto productid = 3016 desc = "Tripp Lite UPS,

Barry, I have had success with NUT on Debian and an EATON 5E2000IUSB-AU 5E 2000VA/1200W UPS With 3 x OUTLETS which I believe is good value. I would believe the the EATON ?5E 1500VA/900W UPS With 3 x OUTLETS would work just as well. The 1500VA also uses the same batteries as the 2000VA so I would believe it would run its raited load longer than 2000VA. My eight drive RAID driver uses less that

I talked to Tripp Lite Technical support. Their policy is that they only support Fedora and SUSE. There is no one there that could help with Ubuntu or NUT issues. The only answer they could give me was to port the rpm files to Ubuntu and use them. This is way beyond my experience level. I will go to the local electronics store and buy a cheap USB 2 hub to see if that works. I will post the

On May 22, 2016, at 10:18 AM, Stuart Gathman wrote: > > I have a ticket open with TrippLite, but at this point it seems to be a > software, rather than hardware problem, since with the newer kernel and > usbhid-ups, the ups stays on the bus, and I could kludge around the > problem by making systemd keep restarting nut-driver. They seem to be > interested in actually resolving

Hi Stuart, I am using OpenMedaVault and purchased the Tripp-Lite SMART1300LCDT. I can't get it to work with OMV. Any ideas for me? I posted a request on the OMV community but no answers. Any direction would be appreciated. Thanks, Roman -------------- next part -------------- An HTML attachment was scrubbed... URL:

On 08/05/2016 01:36 PM, Stuart D. Gathman wrote: > On Fri, 5 Aug 2016, Marco Walther wrote: > >> On 08/03/2016 05:25 AM, Stuart Gathman wrote: >>> I've made some progress getting this Tripplite to work: >>> http://gathman.org/2016/07/30/Standard_Schmandard/ >>> >>> Basically, plug it into a USB hub that actually implements USB2.0,

On 08/03/2016 05:25 AM, Stuart Gathman wrote: > I've made some progress getting this Tripplite to work: > http://gathman.org/2016/07/30/Standard_Schmandard/ > > Basically, plug it into a USB hub that actually implements USB2.0, then > power cycle the port when it hangs. It does seem to be a hardware > problem with the USB controller. Finally an idea;-) I had the same problem

On Aug 19, 2015, at 9:00 AM, Charles Lepple <clepple at gmail.com> wrote: > > On Aug 19, 2015, at 12:08 AM, Johnny Wong <e430benz98 at yahoo.com> wrote: >> >> Here are couple of things I tried. >> >> 1) Changed the USB cable. Same problem >> 2) I put an old CyberPower CP550SL w/USB&SERIAL and it recognize it right away via the USB

On 08/05/2016 03:03 PM, Marco Walther wrote: > On 08/05/2016 01:36 PM, Stuart D. Gathman wrote: >> On Fri, 5 Aug 2016, Marco Walther wrote: >> >>> On 08/03/2016 05:25 AM, Stuart Gathman wrote: >>>> I've made some progress getting this Tripplite to work: >>>> http://gathman.org/2016/07/30/Standard_Schmandard/ >>>> >>>>

On Fri, 5 Aug 2016, Marco Walther wrote: > On 08/03/2016 05:25 AM, Stuart Gathman wrote: >> I've made some progress getting this Tripplite to work: >> http://gathman.org/2016/07/30/Standard_Schmandard/ >> >> Basically, plug it into a USB hub that actually implements USB2.0, then >> power cycle the port when it hangs. It does seem to be a hardware >>

I've made some progress getting this Tripplite to work: http://gathman.org/2016/07/30/Standard_Schmandard/ Basically, plug it into a USB hub that actually implements USB2.0, then power cycle the port when it hangs. It does seem to be a hardware problem with the USB controller. On 05/24/2016 09:06 AM, Charles Lepple wrote: > On May 22, 2016, at 10:18 AM, Stuart Gathman wrote: >> I

I bought this UPS to use with NUT. I've used Belkin, APC, CyberPower, Best, Powerware upses with NUT on dozens of servers beginning with RHEL3. http://www.amazon.com/Tripp-Lite-Display-Protection-SMART1500LCDT/dp/B009TZTGWK Since this was advertised as USB HID, I didn't expect any problems. Bad idea (should have gotten the Cyberware with somewhat less runtime). Initially, it seems to

Another Update: I had to reboot my server today. After the reboot, I had the exact same problem as before without the usb hub. Since I already had the ups connected and communicating, I decided to try to figure out how to fix it. Here is what worked for me using the usb 2.0 hub sudo upsd ?c stop sudo upsdrvctl stop sudo upsdrvctl start sudo upsd Everything connected up and was

> Is it possible that there is another copy of the driver running in the background? There is apparently an issue where we only >write a PID file when the driver goes into the background, and "-D" prevents that. I don't see another usbhid-ups running ... unless its "hidden".... I would have to install the unhide package then.... /var/run/devd.pid

Did my last message get through? I got a message from the list saying it "bounced" or something like that? Sent from Mail for Windows 10 From: Charles Lepple Sent: Wednesday, August 19, 2015 6:00 AM To: Johnny Wong Cc: nut-upsuser at lists.alioth.debian.org Subject: Re: [Nut-upsuser] Need help with Tripp Lite SMART1300LCDT NUT v2.7.3 On Aug 19, 2015, at 12:08 AM, Johnny Wong