similar to: [HCL] NHS Laser Senoidal 5000VA supported by gamatronic

Below the answers: > This is the same as https://github.com/networkupstools/nut/issues/254 , right? Yes, this UPS is the same. > Does battery.runtime only get updated when on battery power, or is this with a different load? > battery.runtime.low: 59940 > battery.temperature: 00 Yes, this time time is updated on battery power, This is a dynamic counter that changes with a different

This is the same as https://github.com/networkupstools/nut/issues/254 , right? (It's on my TODO list. DDL updates take a little longer than HCL updates.) Other comments below. > On Dec 29, 2015, at 1:55 PM, Thiago Wiezbicki - NHS <thiago.wiezbicki at nhs.com.br> wrote: > > Device Manufacturer: NHS > Device Name: Laser Senoidal 5000VA > > upsc output when the UPS is

I wasn't clear. battery.runtime.low is not a counter, but a value estimated in seconds that is decreasing conforming the battery is discharging. It's mean: How much time (in seconds) will be necessary until the battery achieve the depleted status ( http://www.networkupstools.org/protocols/sec.html#Estimated_Minutes ) . If the UPS don't have a load, this value will be higher than the

On Jan 8, 2016, at 7:09 AM, Thiago Wiezbicki - NHS <thiago.wiezbicki at nhs.com.br> wrote: > >>> battery.runtime: 00076 >>> battery.runtime.low: 59940 >> >> This seems rather high. This variable is supposed to represent the runtime [in seconds] below which the UPS will signal "LB", but this capture only shows "OB". > > This value

On Jan 13, 2016, at 6:00 AM, Thiago Wiezbicki - NHS <thiago.wiezbicki at nhs.com.br> wrote: > > The battery.run.low can be higher than battery.runtime, do you agree? I agree with that statement, given what the gamatronic driver is currently reporting. However, I think it should report the elapsed time as battery.runtime.elapsed. I have created a Github issue to clarify the

Device Manufacturer: NHS Device Name: Expert C Online 6000 upsc output: battery.charge: 100 battery.current: 0.6 battery.date: 01012014 battery.runtime: 00000 battery.runtime.low: 59940 battery.temperature: 29 battery.voltage: 210.5 device.mfr: NHS Sistemas de Energia device.model: EXPERT GIII 8kVA device.type: ups driver.name: gamatronic driver.parameter.pollinterval: 20

On Nov 12, 2014, at 5:46 AM, Thiago Wiezbicki <thiagowzb at gmail.com> wrote: > > > Device Manufacturer: NHS > Device Name: Expert C Online 6000 > > upsc output: > > battery.charge: 100 > battery.current: 0.6 > battery.date: 01012014 > battery.runtime: 00000 Quick question: does "battery.runtime" update when the device is on battery, or is this

*Q: Quick question: does "battery.runtime" update when the device is on battery, or is this field always zero?* *A: Yes, the UPS battery time starts counting when the device starts on battery.* Q: "battery.runtime.low" should be the number of seconds remaining before switching to "LB" status. This seems large, even for a 6000 VA UPS. Is this configurable? A: I

Hola a todos: Estoy intentado realizar un modelo senoidal de unos datos de radiación solar con el fin de afrontar el relleno de la serie y aplicar la prueba de Thom para verificar su homogeneidad [0]. De momento me encuentro con los siguientes problemas: 1- ¿Existe la prueba de Thom en R? ¿O debo crearme mi propia función? 2- Para la realización del modelo senoidal estoy siguiendo los pasos

Hi, Recently I got three units of this nobreak [0]: The intention is connect it with some file server and/or web server. I found the NUT via FreeNAS [1] , and the contribuition [2] of Ulisses and Rodrigo about this vendor SMS, in Brazil. But, initially, i'm trying to apply the Ulisses patch (for smsbrasil driver) in a Debian Server, with no success. Can anyone help me about the patch in

On Feb 18, 2014, at 5:55 PM, Thiago Tiedtke dos Reis wrote: > Hi, > > Recently I got three units of this nobreak [0]: ... > [0] http://www.sms.com.br/produtos/Nobreak-SMS/Manager-III-Senoidal According to the HCL, for the Manager III, you might want to try the blazer_ser (or in 2.7.1, nutdrv_qx): http://www.networkupstools.org/stable-hcl.html -- Charles Lepple clepple at gmail

Hi, I'm new to this list but I have some contribution to do (or new problem!) At this mailing list archive, october, last year, I could see that there is a demand for a nut-driver for some brazilian SMS UPS. (Monophase: Net+ and Senoidal models). The first version is running under some limitations, but it is going on. If anyone has interest for improvements, suggestions, then I can

On Nov 22, 2014, at 5:16 AM, Thiago Wiezbicki <thiagowzb at gmail.com> wrote: > Below , it's a second upsc command using our UPS on battery and with device ID, battery time, battery low time that UPS calcs correctly. Let me remember now, We have the same UPS in 6, 8, 10 and 12 kVA version, and it's names are : Expert C Online 6000 , 8000 , 10000 and 12000 ( or Expert G III

What information Do I need to provide more, beyond upsc and shutdown tests for add these devices on HCL ? Thanks, ------------------------------ Thiago Wiezbicki -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20141125/07793b94/attachment-0001.html>

Dear, Currently, I'm looking for a UPS that can support NUT. I found an APC Smart-UPS 5000VA 230V SRT, but I'm not 100% that is supported. *APC Smart-UPS 5000VA 230V SRT* http://www.apc.com/shop/nl/nl/products/APC-Smart-UPS-SRT-5000VA-230V/P-SRT5KXLI I searched in http://networkupstools.org/stable-hcl.html and I found that you support "*APC Smart*" I would just to confirm

I''ve a remote database create using Oracle. This database use schemas. I tried to connect to it using Ruby On Rails,with this file Database.yml : development: adapter: oci host: liber database: ENERGIA username: user password: pass test: adapter: oci host: liber database: ENERGIA username: user password: pass production: adapter: oci host: liber database:

Hi, I'm new in the list and I'm having a little bit trouble to put the megatec_usb to work. I've been using NUT for a while with the apc and megatec driver (serial), with no problem. The server is a Ubuntu 8.04.2 with NUT version 2.2.1-2.1ubuntu7.2, the default package version in this ubuntu release. I've configured the ups.conf as follows: [sms] driver = megatec_usb

Hi, I'm new in the list and I'm having a little bit trouble to put the megatec_usb to work. I've been using NUT for a while with the apc and megatec driver (serial), with no problem. The server is a Ubuntu 8.04.2 with NUT version 2.2.1-2.1ubuntu7.2, the default package version in this ubuntu release. I've configured the ups.conf as follows: [sms] driver = megatec_usb

Hi. I'm admin at a computer lab. Just started here, and I'm trying to set samba up. I'm having the following problem: The server (FreeBSD 4.7) has a HP LaserJet 6MP installed on it. So far so good, works great. When installing this printer on network computers, I have no problem, even printing, but someone installed the wrong driver (fortunatelly its a PS driver). When I try to

Buenas tardes, Solicito por favor ayuda con este error: Error: OutOfMemoryError (Java): Java heap space Estoy trabajando con matrices de grandes dimensiones y el programa no logra completarse porque dice le falta memoria. Gracias [unnamed] Sara Suarez Zapata Estudiante en práctica - Unidad Gestion Bolsa de Energia. Tel: (574) 380 61 18 Correo: sara.suarez en