similar to: Running on virtual machine and audio not intelligable

Have a new TE133 in a dell R320. dahdi_cfg -vvv shows: DAHDI Tools Version - 2.9.1 DAHDI Version: 2.9.1 Echo Canceller(s): Configuration ====================== SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: Clear

Hello, After installing on Ubuntu 10.04 using the tutorial on http://hmontoliu.blogspot.com/2010/03/installing-asterisk-and-freepbx-on.html I have a running instance of Asterisk. PROBLEM: result of dahdi_cfg: DAHDI Tools Version - 2.2.1 DAHDI Version: 2.2.1 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2)

Hi all! I'm new with telephony cards and DAHDI drivers. I have installed Asterisk NOW 3.0.0 and update to Asterisk 11.7.0, modules are update too. I'm following the installation guide of Atcom [1] for AX1600P analogic card, modules are loaded [root at pbx ~]# lsmod | grep -E "hisax|netjet|dahdi" netjet 14618 0 isdnhdlc 4523 1 netjet mISDNipac

I updated Asterisk to 1.6.2.7 and now the user introduction in the meetme application is no longer working: [May 27 09:26:51] WARNING[2407]: channel.c:4034 ast_request: No channel type registered for 'DAHDI' -- Created MeetMe conference 1023 for conference '800' [May 27 09:26:51] WARNING[2407]: app_meetme.c:3640 find_conf: No DAHDI channel available for conference, user

Hi All, I have installed asteriskNow with Asterisk 1.6.2.11 and FreePBX 2.7.0.10. I have configured x100p fxo card in my asterisk box. But in my cli mode i am not getting the command *"dahdi show status"* Output of CLI : astrisks*CLI> *dahdi show status* No such command 'dahdi show status' (type 'core show help dahdi show' for other possible commands) I

Hello everyone, I have a Atcom AX-1600P(1) card with a FXO module and I can't configure it. I have four extension with this PJSIP settings: --- /etc/asterisk/pjsip.conf --- [transport-udp] type=transport protocol=udp bind=0.0.0.0 [6001] type=endpoint transport=transport-udp context=from-internal disallow=all allow=ulaw auth=6001 aors=6001 direct_media=no rtp_symmetric=yes force_rport=yes

Hello all, I have a TC400B Digium card in order to deal with transcoding and I have some trouble using it, I have a timer synchronisation problem! I would be very grateful if you have any idea to help me? It seems that the card is not correctly synchronised to the system because when I speak to one side, the sound takes 5 seconds to go to the other side, and increasing, after 30 seconds of call,

Errors follow: make make -C linux all make[1]: Entering directory `/usr/local/src/asterisk/dahdi-linux-complete-2.4.1.2+2.4.1/linux' make -C drivers/dahdi/firmware firmware-loaders make[2]: Entering directory `/usr/local/src/asterisk/dahdi-linux-complete-2.4.1.2+2.4.1/linux/drivers/dahdi/firmware' make[2]: Leaving directory

Hello, I am installing dahdi on a machine lspci 00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller (rev 01) 00:01.0 PCI bridge: Intel Corporation 3200/3210 Chipset Host-Primary PCI Express Bridge (rev 01) 00:06.0 PCI bridge: Intel Corporation 3210 Chipset Host-Secondary PCI Express Bridge (rev 01) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI

asterisk*CLI> dahdi show status Description Alarms IRQ bpviol CRC4 T2XXP (PCI) Card 0 Span 1 OK 0 0 0 T2XXP (PCI) Card 0 Span 2 RED 0 0 0 On Thu, Apr 2, 2009 at 9:40 PM, Martin <asterisklist at callthem.info> wrote: > That's very strange ... the code when is

On Thu, Jun 6, 2019 at 12:17 PM Malcolm Davenport <malcolmd at sangoma.com> wrote: > Howdy, > > There's a dahdi-linux-complete-3.1.0-rc1+3.1.0-rc1.tar.gz. > > Try that. > I noticed that was there, but I didn't try it originally because it's obviously a beta version. However, I did download it and try it. It does compile, but doesn't work correctly. For one

The TDM410P doesn't support 'hvac', only the obsolete TDM400P supports that option was for the old phones that have a neon light (or equivalent LED+ZENER ciruit). Are other phones off the TDM410P (other than the VTECH) working, or is the Vtech the only model with VMWI available to you. I'm not able to check at the moment, I have copied the asterisk-users list, someone else may

Hi I am in the process of installing a new box and using dahdi. I have a tdm410 + hardware echo canceller. I have just read in the read me for dadhi that VPMADT032 support has been removed and unlike with the zaptel stuff i could just download and install the firmware I can't with dahdi what is the best way forward to recompile with hardware echo canceller support. Thanks Alex

Just finished installing Kernel 3.0.0 and tried to compile DAHDI Complete 2.4.1.2+2.4.1. Errors below: ________ /home/doug/Extracts/dahdi-linux-complete-2.4.1.2+2.4.1/linux/drivers/dahdi/dahdi-base.c:95:2: warning: #warning "No CONFIG_BKL is an experimental configuration." CC [M]

hello friends, i have to configures asterisk n my hardware details are O.S - Ubuntu 8.04 Lts Memory - 1 GB Proccessor- core 2 duo is any one having a good link or how to related asterisk. any help,support will be higly appreciated thx -------------- next part -------------- An HTML attachment was scrubbed... URL:

Actually I can start and receive SIP calls (PC client, iphone client) but?I have an issue with calling external number throught PSTN (certified-asterisk-1.8.11-cert2). I'm having this ?error when making a call: *CLI> ? == Using SIP RTP CoS mark 5 ? ? -- Executing [9000 at local:1] Dial("SIP/3000-00000006", "DAHDI/1/4384019357,10") in new stack [Jun 23 16:18:09]

Hello, The harddisk of my etch/bristuffed asterisk1.2 box finally died. I moved the cheap (1397:2bd0) HFC-S card to a squeeze host (i686) and built dahdi modules 2.3.0.1 using m-a. After zaptel->dahdi and asterisk 1.2->1.6 config adaptations, everything seems ok, except for the BRI side, unable to bring layers 1/2 up. Asterisk reports: chan_dahdi.c:12393 dahdi_pri_error: 1 Unable to

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.9.2-rc1 DAHDI-Tools-v2.9.2-rc1 dahdi-linux-complete-2.9.2-rc1+2.9.2-rc1 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete This release is

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.9.2-rc1 DAHDI-Tools-v2.9.2-rc1 dahdi-linux-complete-2.9.2-rc1+2.9.2-rc1 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete This release is

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.9.2 DAHDI-Tools-v2.9.2 dahdi-linux-complete-2.9.2+2.9.2 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete * Mostly stability patches affecting