similar to: DMTF in clock rates other than 8000 for chan_sip

Hello, On an Asterisk 1.4.33.1 in a simple scenario: [test] exten => _X.,1,Dial(SIP/12345 at peer01,,,) exten => i,1,Hangup(${HANGUPCAUSE}) exten => t,1,Hangup(${HANGUPCAUSE}) exten => h,1,Hangup(${HANGUPCAUSE}) I have noticed that no matter what value we set in the Hangup(<cause code>) commands, if the call is not answered by peer01 for any reason, the actual cause code

Hi, A glance at sourceforge.net/projects/openh323 Help Forum made me wonder if this location is the one to use (I got trouble in the past when google pointed to an obsolete site) : some quite old messages remain unanswered. Cheers -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, Does anyone know any solution to this? Or is Asterisk-Dev a more suitable list to ask this question? Best regards, Vlasis Hatzistavrou. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Vlasis Hatzistavrou Sent: Thursday, February 16, 2006 3:43 PM To: asterisk-users@lists.digium.com Cc: 'Vlasis

Hello, I have been wrestling with installing the CAPI drivers for AVM Fritz in order to use chan_capi with Asterisk. I use an SMP machine, RH 9. I have found rpm's for CAPI and AVM drivers (namely: capi4k-utils-2003.06.16-08.mungo.RH9.i686.rpm and kernel-2.4.20-8- avmfcpci-03.11.02-08.mungo.RH9.i686.rpm), but I believe that they support only single processor machines. I've already

Hello all, We have been testing Asterisk RC2 with the native H323 channel driver. We followed the instructions with the needed OpenH323 and PWLib versions and everything compiled ok. Operation of the driver seems ok, except from 2 main points: 1) Audio is passed between the two ends of the call only after the call is answered. This was not the case with previous versions of Asterisk (0.9.2

Hello, I just tried to compile OH323 0.6.3b on a RH9 machine with Asterisk 1.0 RC2 installed but failed. I applied the patch to the required OpenH323 library according to the instructions, and set the proper directories in the Makefile. Here is what I receive after I issue make: ******************************* g++ -DP_USE_PRAGMA -fno-rtti -ffunction-sections -fdata-sections -D_REENTRANT -

Hello, I'd like to ask if there are any news about CE certification of the E1 boards. I know that the T1 boards are FCC certified but I'd also like to know what is the status for CE certification. Thanks for any input, Vlasis Hatzistavrou.

Hi, How to accept DMTF tone during ringing mode? Its possible. Regards -Hadi.Salem

I'm having problems with a new asterisk PBX install. the phones/ATAs are all linksys/cisco. They all worked before with a commercial softswitch. Most of the linksys devices offer auto, inband, INFO and AVT. I'm looking for suggestions. Thanks in advance -- One day at a time, one second if that's what it takes

Hi, Some users have been reporting a peculiar problem. The are having an issue when they dial out to some multi-level IVRs where you make 2 or 3 touchtone choices and then are connected to a live operator. When the live operator connects the operator cannot hear them or sometimes it results in dead air. With the one-way audio issue, is it possible that something has locked the channel into some

While trying to use direct_media I'm seeing RTP payload mismatches after succesful reinvites. Initial INVITE from endpoint A to asterisk has rfc4733 DMTF m=audio 35648 RTP/AVP 9 8 111 96 a=rtpmap:96 telephone-event/8000 a=fmtp:96 0-16 >From asterisk to upstream U: m=audio 14338 RTP/AVP 9 8 111 18 0 101 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 So the payload types in the RTP

I have three Sipura 3000 FXO untis for incoming PSTN lines on a small pbx. There is an IVR to select the extension. The DTMF tones are not being sensed so the IVR does not work and incoming calls are not being answered. I have listed my sip.conf entries. Is there any solution to this? ;Sipura units [101] type=friend host=dynamic context=default secret=mysecret mailbox=101 dtmfmode=inband

Since firmware 1.0.3.81, unless I'm imagining things, Voicemail2 seems to be having problems. The Grandstream and sip.conf were set to RFC2833 now with that setting I get extra digits during "Mailbox" and "Password" phases. 222001 instead of 2201 for example. When both are changed to "SIP info" there is no problem. But what is the new setting "DTMF Payload

Hi, Which DTMF mode do people mostly use? I've tried SIP INFO and RFC2833 but although Asterisk recognises the tones (for feature usage), the tones arent repeated to the end user. So if I call a company that has a menu system, I can't use the menu. Thanks Dan -------------- next part -------------- An HTML attachment was scrubbed... URL:

asterisk-users-request@lists.digium.com wrote: >Send Asterisk-Users mailing list submissions to > asterisk-users@lists.digium.com > >To subscribe or unsubscribe via the World Wide Web, visit > http://lists.digium.com/mailman/listinfo/asterisk-users >or, via email, send a message with subject or body 'help' to > asterisk-users-request@lists.digium.com > >You can

Hello, I have used the Dial option 'r' before in older Asterisk versions and it behaved as expected, that is, Asterisk would always give ringback audio before the call was answered no matter what. It has been a while that I have used version 1.4.33.1 without any the 'r' option. Now that I had to use it for a while, I noticed that 'r' would not give ANY audio until the

Hello all, Sorry for the slightly off-topic issue, I need to have a capture from a network sniffer (like Ethereal for example) from a call setup with the MGCP protocol. I thought that since Asterisk now supports MGCP some of the people who develop the MGCP channel driver may have such a capture available. I need this for my MSc thesis and unfortunately, I don't have any MGCP compliant

Hello, I would like to ask if anyone has solved the problem with Asterisk+ISDN4Linux cards, where there are no call progress tones or announcements from the PSTN when we dial ouot through the i4l card. For the moment, if we don't inject the r option in the Dial command, there is only silence during the call negotiation... Using Asterisk RC2 with Eicon passive PCI 2.01 card... Thanks for

Hello, I use Asterisk CVS-v1-0-12/21/04-11:05:29 and I noticed that when we receive calls from a partner's IP address (who has a static host entry in the sip.conf file) but the RTP comes from a different address than the signaling, our * sends a 403 forbidden message and drops the call. This problem does not llow us to receive calls from SIP proxies. Was this fixed in newer versions of

Hello, I am trying to write an AGI in Perl and I need to execute a function upon answer of a call. I know that there is the possibility to use the M() option in the Dial command in order to do what I need, but that would mean that I would have to incorporate the function's work in a different AGI program, and I need to avoid this. So, I would like to know if such an option is available in