similar to: No matching endpoint found for incoming call from SIP trunk

Thanks George, for your mighty quick response. I made the changes (re: server_uri_pattern etc.) and still, no luck--it fails for the same error. BTW, there is nothing for transport (but this is the same config from my SIP/UDP + Twilio days, which worked): *CLI> pjsip show transport twilio-siptrunk Unable to find object twilio-siptrunk. *CLI> pjsip show identifies No objects found. I did

On Wed, Feb 17, 2016 at 8:56 AM, Sonny Rajagopalan < sonny.rajagopalan at gmail.com> wrote: > I made some progress. The first thing I have realized is that it is my > Twilio configuration in pjsip_wizard.conf that was killing me. I have since > removed that entire file from /etc/asterisk and I am able to make > "from-internal" context calls (i.e., calls that do not

On Wed, Feb 17, 2016 at 12:13 PM, Sonny Rajagopalan < sonny.rajagopalan at gmail.com> wrote: > Wow. Incredible. That worked. The backslash is important there; I kept > trying with no backslash and followed the instructions in > pjsip_wizard.conf.sample (in configs/samples) and it says we have to say > > transport=tcp ; the only example however talks about ipv4. > > Is

Yes, it is enabled on port 5060. I do receive a TCP ACK back from the server, so I know the TCP segment is received at the server hosting the Asterisk build. On Wed, Feb 17, 2016 at 8:36 AM, A J Stiles <asterisk_list at earthshod.co.uk> wrote: > On Wednesday 17 Feb 2016, Sonny Rajagopalan wrote: > > OK. Let me ask this. Is anything else necessary, except choosing TCP as > the

On Wed, Jun 21, 2023 at 05:19:11PM +0000, TTT wrote: > I am using Asterisk 20.3.0 with PJSIP. I have setup a trunk to my ISP > (Twilio) who requires outbound authentication. My pjsip.auth.conf contains: > > [Twilio] > type=auth > auth_type=userpass > password=mysecret > username=myun > > However, my calls using the trunk are rejected with a 403. Using pjsip >

I didn't use pjsip_wizard, I'm kind of crafting this by hand as I learn. I actually have a plain asterisk, and a FreePBX, system to help me learn. I sometimes create something in FreePBX to see what it does to the config files. So that's how I modelled my pjsip.X.conf files If I issue the command "pjsip show endpoint Twilio" it does show that outbound_auth=Twilio Does

I am using Asterisk 20.3.0 with PJSIP. I have setup a trunk to my ISP (Twilio) who requires outbound authentication. My pjsip.auth.conf contains: [Twilio] type=auth auth_type=userpass password=mysecret username=myun However, my calls using the trunk are rejected with a 403. Using pjsip logging I notice that the outgoing invite does not have an authentication line. Why is Asterisk not sending

Using pjsip 2.7.2 on Asterisk 15.5 Really struggling to make sense of translating these old 1.8 SIP instructions into a neat pjsip_wizard conf suitable for 2018 http://wiki.sip2sip.info/projects/sip2sip/wiki/SipDevicesAsterisk#Version-18 In pjsip_wizard.conf, I have the following, which seems to get me registered, and it responds to an incoming call, but I always get this: [Jul 28 18:32:29]

I have a working Asterisk 13.1.0 running, and I am trying to configure a SIP trunk for outbound and inbound calling, and a DID for the Asterisk server, which is used for incoming calls from PSTN. I configured my SIP.US trunks (showing one gateway, gw1, here for brevity, have two: gw1 & gw2, which are both configured on my end): [sonnyGW1] type=registration transport=transport-udp

On Saturday, April 18, 2020 5:42:11 PM CEST Joshua C. Colp wrote: > On Sat, Apr 18, 2020 at 8:47 AM hw <hw at gc-24.de> wrote: > > Hi, > > > > how do I make a bug report? I filled in the form to make a report and > > https://issues.asterisk.org/jira/issues/?filter=-2 still shows no issues > > reported by me. > > If successful then JIRA will redirect

Yes, I have tried that too (i.e, exten => +17775551212,1,Log(WARNING, TWILIO)). It does not work and NO error message in CLI. I have also tried http://orourketech.com/elastix-plus-sign-caller-id-messing-things/ since I first emailed this group, but that does not seem to work either. Here is my log: [Dec 2 15:09:28] NOTICE[26464]: res_pjsip_session.c:1920 new_invite: Call from

Hi, how do I make a bug report? I filled in the form to make a report and https://issues.asterisk.org/jira/issues/?filter=-2 still shows no issues reported by me. If someone knows how to get asterisk to re-register when using pjsip after the registration shows as Rejected, like after the internet connection to the VOIP provider goes away (and comes back), please let me know. This bug makes

Would greatly appreciate any input into this currently-unanswered question on the forum: http://forums.asterisk.org/viewtopic.php?f=1&t=96496 I posted it on Jan 6th, have tried so many things, so much forum/list searching and late nights since, but have had to admit defeat. Rather than duplicate it all here, I've posted my logs and conf files on that thread, too. Problem is that while

    Dis you set "outbound_auth" in your endpoint configuration to Twilio? On 21/06/23 11:19, TTT wrote: > I am using Asterisk 20.3.0 with PJSIP. I have setup a trunk to my ISP > (Twilio) who requires outbound authentication. My pjsip.auth.conf contains: > > [Twilio] > type=auth > auth_type=userpass > password=mysecret > username=myun > > However, my calls

That was the issue, thanks. I now am able to get the caller ringing on an outbound call, but an external phone number (E164) I am dialing does not ring. On Sun, Mar 15, 2015 at 12:19 PM, George Joseph <george.joseph at fairview5.com > wrote: > > > On Sun, Mar 15, 2015 at 8:32 AM, Sonny Rajagopalan < > sonny.rajagopalan at gmail.com> wrote: > >> I have setup my

I have setup my Asterisk 13.1.0 server with PJSIP on AWS/EC2. My basic configuration works, and I am connected to a SIP trunk using SIP.US, and have set up my inbound calling which works correctly (when I call my PBX DID, the call does come into my PBX network). The issue is that I am not able to make outbound calls, because the call fails with the error:

Hello, I am running Asterisk 13.6.0 in an AWS instance, and I set it up with Twilio SIP trunk using pjsip_wizard.conf (nice feature!). I see that the calls actually "reach" the PBX, but for some reason, they are not caught by any of my extensions context. Here's what I observe when I test this from a non-PBX connected E164 number (a landline), say 555-666-1212. My Twilio number is

Yes, I think the dial does get executed (sonny calling outbound 202-555-1212): core set verbose 3 Console verbose was OFF and is now 3. -- Executing [912025551212 at from-internal:1] Log("PJSIP/sonny-00000031", "NOTICE, Dialing out from "" <sonny> to 12025551212 through fromgw") in new stack [Mar 15 19:27:06] NOTICE[16648][C-00000022]: Ext. 912025551212:1 @

Hello, We have a provider which is using Kamailio as front end. Our asterisk 13/chan_sip server has no problem to register and pass/receive calls form this provider. Now we want to move to asterisk 16/pjsip and face problem. Registration is OK but when we pass a call our INVITE never receive answer from the provider. We opened a ticket to their support but in the mean time we want to know

Nope, there are no contacts to show that pertain to these endpoints (only my SIP trunks show up). On Mon, Feb 15, 2016 at 5:31 PM, Joshua Colp <jcolp at digium.com> wrote: > Sonny Rajagopalan wrote: > >> Does this help: >> > > Yes, the transport parameter is in the Contact header so it's interesting > it didn't work. If you use pjsip show contacts what