asterisk users - Mar 2015 - Asterisk 13.1.0/PJSIP outbound calling using SIP trunk: Unable to create request with auth.No auth credentials for any realms in challenge.

I have setup my Asterisk 13.1.0 server with PJSIP on AWS/EC2. My basic
configuration works, and I am connected to a SIP trunk using SIP.US, and
have set up my inbound calling which works correctly (when I call my PBX
DID, the call does come into my PBX network).

The issue is that I am not able to make outbound calls, because the call
fails with the error:

res_pjsip_outbound_authenticator_digest.c:125
digest_create_request_with_auth: Unable to create request with auth.No auth
credentials for any realms in challenge.

CLI> pjsip show endpoint sonnyGW1

...
========================================================================================
 Endpoint:  sonnyGW1                                        Not in use    0
of inf
    OutAuth:  sonnyGW1_auth/sonny
        Aor:  sonnyGW1                                      0
      Contact:  sonnyGW1/sip:65.254.44.194:5060             Unknown
      nan
  Transport:  transport-udp             udp      0      0  0.0.0.0:5060
   Identify:  sonnyGW1/sonnyGW1
        Match: 65.254.44.194/32

My pjsip.conf is as below

[sonnyGW1]
type=registration
transport=transport-udp
outbound_auth=sonnyGW1_auth
server_uri=sip:gw1.sip.us
client_uri=sip:sonny at gw1.sip.us
contact_user=sonny
retry_interval=60
forbidden_retry_interval=600
expiration=3600

[sonnyGW1_auth]
type=auth
auth_type=userpass
password=somepassword
username=sonny
realm=gw1.sip.us

[sonnyGW1]
type=aor
contact=sip:65.254.44.194:5060

[sonnyGW1]
type=endpoint
transport=transport-udp
context=gateway1
allow=!all,ulaw
outbound_auth=sonnyGW1_auth
aors=sonnyGW1

[sonnyGW1]
type=identify
endpoint=sonnyGW1
match=65.254.44.194

My extensions.conf stub for the appropriate section looks like this (from
https://wiki.asterisk.org/wiki/display/AST/Dialing+PJSIP+Channels) :

exten => _9XXXX.,1,Log(NOTICE, Dialing out from ${CALLERID(all)} to
${EXTEN:1} through gateway1)
exten => _9XXXX.,n,Dial(PJSIP/${EXTEN:1}@sonnyGW1)
; Have also tried
; exten => _9XXXX.,n,Dial(PJSIP/sip:${EXTEN:1}@65.254.44.194:5060)
exten => _9XXXX.,n,Playtones(congestion)
exten => _9XXXX.,n,Hangup()

I do know that this code is being executed as I see the log in the first
line above.

Have I correctly set up authentication for outbound calling?

Any help appreciated. Thanks!
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20150315/2ff229db/attachment.html>

On Sun, Mar 15, 2015 at 8:32 AM, Sonny Rajagopalan <
sonny.rajagopalan at gmail.com> wrote:
> I have setup my Asterisk 13.1.0 server with PJSIP on AWS/EC2. My basic
> configuration works, and I am connected to a SIP trunk using SIP.US, and
> have set up my inbound calling which works correctly (when I call my PBX
> DID, the call does come into my PBX network).
>
> The issue is that I am not able to make outbound calls, because the call
> fails with the error:
>
> res_pjsip_outbound_authenticator_digest.c:125
> digest_create_request_with_auth: Unable to create request with auth.No auth
> credentials for any realms in challenge.
>
> CLI> pjsip show endpoint sonnyGW1
>
> ...
>
========================================================================================>
>  Endpoint:  sonnyGW1                                        Not in use
>  0 of inf
>     OutAuth:  sonnyGW1_auth/sonny
>         Aor:  sonnyGW1                                      0
>       Contact:  sonnyGW1/sip:65.254.44.194:5060             Unknown
>         nan
>   Transport:  transport-udp             udp      0      0  0.0.0.0:5060
>    Identify:  sonnyGW1/sonnyGW1
>         Match: 65.254.44.194/32
>
> My pjsip.conf is as below
>
> [sonnyGW1]
> type=registration
> transport=transport-udp
> outbound_auth=sonnyGW1_auth
> server_uri=sip:gw1.sip.us
> client_uri=sip:sonny at gw1.sip.us
> contact_user=sonny
> retry_interval=60
> forbidden_retry_interval=600
> expiration=3600
>
> [sonnyGW1_auth]
> type=auth
> auth_type=userpass
> password=somepassword
> username=sonny
> realm=gw1.sip.us
>
You probably need to remove the 'realm' line so that it will match any
realm in the challenge.

>
> [sonnyGW1]
> type=aor
> contact=sip:65.254.44.194:5060
>
> [sonnyGW1]
> type=endpoint
> transport=transport-udp
> context=gateway1
> allow=!all,ulaw
> outbound_auth=sonnyGW1_auth
> aors=sonnyGW1
>
> [sonnyGW1]
> type=identify
> endpoint=sonnyGW1
> match=65.254.44.194
>
> My extensions.conf stub for the appropriate section looks like this (from
> https://wiki.asterisk.org/wiki/display/AST/Dialing+PJSIP+Channels) :
>
> exten => _9XXXX.,1,Log(NOTICE, Dialing out from ${CALLERID(all)} to
> ${EXTEN:1} through gateway1)
> exten => _9XXXX.,n,Dial(PJSIP/${EXTEN:1}@sonnyGW1)
> ; Have also tried
> ; exten => _9XXXX.,n,Dial(PJSIP/sip:${EXTEN:1}@65.254.44.194:5060)
> exten => _9XXXX.,n,Playtones(congestion)
> exten => _9XXXX.,n,Hangup()
>
> I do know that this code is being executed as I see the log in the first
> line above.
>
> Have I correctly set up authentication for outbound calling?
>
> Any help appreciated. Thanks!
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20150315/259dc6af/attachment.html>

That was the issue, thanks. I now am able to get the caller ringing on an
outbound call, but an external phone number (E164) I am dialing does not
ring.

On Sun, Mar 15, 2015 at 12:19 PM, George Joseph <george.joseph at
fairview5.com
> wrote:
>
>
> On Sun, Mar 15, 2015 at 8:32 AM, Sonny Rajagopalan <
> sonny.rajagopalan at gmail.com> wrote:
>
>> I have setup my Asterisk 13.1.0 server with PJSIP on AWS/EC2. My basic
>> configuration works, and I am connected to a SIP trunk using SIP.US,
and
>> have set up my inbound calling which works correctly (when I call my
PBX
>> DID, the call does come into my PBX network).
>>
>> The issue is that I am not able to make outbound calls, because the
call
>> fails with the error:
>>
>> res_pjsip_outbound_authenticator_digest.c:125
>> digest_create_request_with_auth: Unable to create request with auth.No
auth
>> credentials for any realms in challenge.
>>
>> CLI> pjsip show endpoint sonnyGW1
>>
>> ...
>>
========================================================================================>>
>>  Endpoint:  sonnyGW1                                        Not in use
>>  0 of inf
>>     OutAuth:  sonnyGW1_auth/sonny
>>         Aor:  sonnyGW1                                      0
>>       Contact:  sonnyGW1/sip:65.254.44.194:5060             Unknown
>>           nan
>>   Transport:  transport-udp             udp      0      0  0.0.0.0:5060
>>    Identify:  sonnyGW1/sonnyGW1
>>         Match: 65.254.44.194/32
>>
>> My pjsip.conf is as below
>>
>> [sonnyGW1]
>> type=registration
>> transport=transport-udp
>> outbound_auth=sonnyGW1_auth
>> server_uri=sip:gw1.sip.us
>> client_uri=sip:sonny at gw1.sip.us
>> contact_user=sonny
>> retry_interval=60
>> forbidden_retry_interval=600
>> expiration=3600
>>
>> [sonnyGW1_auth]
>> type=auth
>> auth_type=userpass
>> password=somepassword
>> username=sonny
>> realm=gw1.sip.us
>>
>
> You probably need to remove the 'realm' line so that it will match
any
> realm in the challenge.
>
>
>>
>> [sonnyGW1]
>> type=aor
>> contact=sip:65.254.44.194:5060
>>
>> [sonnyGW1]
>> type=endpoint
>> transport=transport-udp
>> context=gateway1
>> allow=!all,ulaw
>> outbound_auth=sonnyGW1_auth
>> aors=sonnyGW1
>>
>> [sonnyGW1]
>> type=identify
>> endpoint=sonnyGW1
>> match=65.254.44.194
>>
>> My extensions.conf stub for the appropriate section looks like this
(from
>> https://wiki.asterisk.org/wiki/display/AST/Dialing+PJSIP+Channels) :
>>
>> exten => _9XXXX.,1,Log(NOTICE, Dialing out from ${CALLERID(all)} to
>> ${EXTEN:1} through gateway1)
>> exten => _9XXXX.,n,Dial(PJSIP/${EXTEN:1}@sonnyGW1)
>> ; Have also tried
>> ; exten => _9XXXX.,n,Dial(PJSIP/sip:${EXTEN:1}@65.254.44.194:5060)
>> exten => _9XXXX.,n,Playtones(congestion)
>> exten => _9XXXX.,n,Hangup()
>>
>> I do know that this code is being executed as I see the log in the
first
>> line above.
>>
>> Have I correctly set up authentication for outbound calling?
>>
>> Any help appreciated. Thanks!
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>                http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20150315/2c44a5f5/attachment.html>