similar to: Help debugging a possible SIP channel leak in 11.17.0, possible race condition

Have you tried Asterisk 13? The bridging mechanism has been completely rewritten on Asterisk 12, so there's no longer channel masquerading and zombie channels. Might be worth a try. 2015-04-07 20:33 GMT-03:00 Alex Villac??s Lasso <a_villacis at palosanto.com>: > El 07/04/15 a las 17:38, Alex Villac??s Lasso escribi?: > > I am trying to collect enough information about an

El 07/04/15 a las 17:38, Alex Villac??s Lasso escribi?: > I am trying to collect enough information about an problem a client is having with its asterisk 11.17.0 x86_64. This issue was observed before in 1.8.20, and we upgraded to 11.15.0 and then to 11.17.0 with no solution. > > Background: this client is a telemarketing call-center that generates outgoing calls with close to a hundred

Hello list. We just upgraded to 1.6.1.11. We are using real time information stored on mysql databases. That is all running fine. Now, since we upgraded, some member don't get calls from queues. In CLI: "queue show" shows something like: 611 (Local/611 at agents) with penalty 20 (realtime) (*In use*) has taken no calls yet We use the extension 611 in different computers, in the

Egad, not again with Broadvoice! Anyhow, I recently installed AAH and configured my TDM11B and got that and some SIP phones working. I still have some issues to work out, etc, but my current problem is Broadvoice. I have checked out all of the online resources, including the recent list exchange about the recent changes made by Broadvoice. However, the one thing I have found to be consitent in

Asterisk 11.1.0 One queue with strategy=leastrecent. (Full queues.conf below.) Occasionally (several times today), a caller will get "stuck" in the queue - there are operators available to take the call, but the caller stays in the queue for a long time. Any idea what might cause this, or where I can start looking to debug it? I'm going to start digging through the queue log

Outbound calls on my Telus PRI aren't taking the Name portion of the callerID. I've looked at the logs, and it is being set (see below), but the PRI debug output doesn't show the name being sent anywhere. As a result, received calls always display from Unknown (or just the number). Is there some config that I've missed somewhere? I'm running NI-1 (Telus says NI-2 doesn't

I have a very lite layout and attempting to get the SIP configuration set up initially before proceeding into other areas. VMware is running my Asterisk 11 on Ubuntu 12. Shouldnt I be able to at least ping the SIP provider IP? I run command "sip show registry" and do not see it set up. I run sip show peers and I do see an entry. I have not configured anything other then entries in the

Hi We've recently set up and are using with success 1.0.7 using a Junghanns quadbri card to BRI ISDN, and Firefly with IAX2 protocol as softphones Works very well, however we're getting cases where sometimes the call just drops. >From setting more verbose modes we get a log which is shown below. The problem seems to be the maxretries message which comes from chan_iax2. We are using

sorry for top-posting, the two topics started with 2 different reason subject, but then we finished on the same problem. btw,the 2 show channel are reported above: the channel with DTMF working kcenter*CLI> core show channel SIP/pbx2-000004b9 -- General -- Name: SIP/pbx2-000004b9 Type: SIP UniqueID: 1467323106.1275 Caller ID: xxxx Caller ID Name: xxxx

I currently have the following outbound-local config in my setup.... I can call SOME of the numbers (like 337xxxx, and 998xxxx, and 323xxxx).. but when I try to dial say like 601xxxx I get a 404.. any thoughts, I can't see any difference in the config. Also, I seem to be able to dial any number that starts with a 9.. such as 977, 990, 903.. [outbound-local] ;exten =>

On 12/13/19 9:28 PM, Greg Troxel wrote: > sean darcy <seandarcy2 at gmail.com> writes: > >> I'm moving asterisk to a laptop, so can't use the dahdi board. Is >> there any supported USB dahdi device ? I see the Sangoma USBfxo >> device, but the dahdi driver no longer supports it. Anything else ? > > There is also the ObiHai OBi202 with an OBiLine, which

Hello Asteriskers, :-) We're trying to set up an outbound notification calling for system alerts with Asterisk 1.4.0. We generate a call file in /var/spool/asterisk/outgoing and the outbound call is originated through Zap/1 (Sangoma A200D to a Canadian POTS line). The problem is that Asterisk does not wait for the other side to answer before it starts playing the message. So the

Hello everyone! I've had this problem for a while and cant figure it out. When an outside caller calls an extension on my asterisk system, they do not hear any sort of ringing. Inside extensions calling other extensions do hear ringing. We have 3 other asterisk systems that are configured the same way, but do not have this problem. We think it has something to do with asterisk 1.6. The other

Hi this message give me when I calling a number than actually not busy: "Dial failed due to trunk reporting BUSY - giving up" max channel is unlimited and sometimes it dial number ok but most of the time it gives me this error. Please inform me how can solve this problem. thanks -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi All, I have searched the various post and not able to find the solution. I am using Asterisk 1.4.21.2 for outgoing calls. Earlier i used ZAP trunk and it works fine. Now i need to move to SIP trunk and configured the same. When i try from softphone i got error as "Call rejected" and in the asterisk i got error as

Hi All, I am trying to connect my asterisk box with freepbx to PSTN. I have purchased x100p FXO card and installed in my asterisk server. My freepbx detected the x100p FXO card and i can see the card specific details in command line. I have configured the following things. 1. OUTBOUND caller id and Dialing rules in Freepbx. 2. INBOUND route When i call to the PSTN number before

Dear, I have this scenario: - PBX Asterisk 1.6.2.10 with private IP 192.168.0.10 - Behind a Cisco ASA firewall that connects to Internet - SIP trunk to Net2Phone with these parameters (nat=no): host=200.58.113.60 username=DOLLY secret=123456 port=5060 type=peer dtmfmode=rfc2833 disallow=all allow=alaw&ulaw nat=no canreinvite=no qualify=yes -Softphones Xlite The PBX can't register to

hello list i have an issue related to outbound calls i can contact all the number except on number given by our provider in trunk the issue just when i configure my trunk in our server but when i configure the trunk directly in x-lite i can contact this number without issue below the cli == Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 -- Executing [0149xxxxxx at

You would need to give more information really. Your sip.conf file listing the entries for the phones especially which codecs are permitted. A copy of the 'asterisk -rvvv' console output when you make the call. On 27/03/15 17:05, Salaheddine Elharit wrote: > please no body has som with aastra can help me in this issue > > 2015-03-26 11:02 GMT+00:00 Salaheddine Elharit >

Hi people, I have a problem with some extensions. The calls are ended after 31/35 seconds, also, it depends on the number which I call. This is the log, but I've not been able to find something wrong... Any ideas? [Jun 11 15:50:46] DEBUG[26071] app_macro.c: Executed application: ExecIf [Jun 11 15:50:46] VERBOSE[26071] logger.c: -- Executing [s at macro-dialout-trunk:16]