similar to: IAX2 trunk with on demand Internet link

Hi, I have an audio quality problem regarding IAX2. I have 2 Asterisk servers interconnected via 2 LAN trunks at 1Gbps (no nat, no firewall). One trunk is SIP and the other IAX2. Normally, I use IAX2 but have noticed easily reproducible audio quality problems (voice in/out is OK but there's a "third" noise overlapping with a "scratchy sound" as if it were some kind of

Hi, I am trying to connect two Asterisk servers using IAX2. Everything works fine when I couple them within a LAN segment, but not when I connect them using WAN connections. I made sure that the routers' ports are mapped properly and checked this with additional ssh rules. ServerA is a Raspberry box with the vendor's Asterisk version 1.8.13.1 and ServerB is normal CentOS 7 box with

Today has been the day for satellite questions, apparently, so I'll proxy one out to the rest of the community... I asked this tangentially a month or two ago, but I'll put it in a more blunt way: If you have IAX2 trunking mode experience over satellite, please let us know your experiences with that protocol/transport combination. I've got several people asking about IAX2 and

Hi all - We have several servers working just fine with IAX2 w/o trunk mode. We are trying to setup trunk mode to save bandwidth, but we can not achieve the savings with our current configuration (see below). When we place a call between * boxes A & B it works fine, but the command 'iax2 trunk debug' shows no activity for the trunk mode (1 peer, 0 calls). Anyone who has

I need to get 2 Asterisk servers working together. I have been reading and doing just about every example I have been able to find here on the list and the Wiki. It's now gotten to the point that nothing on box2 seems to be working. I seem to have a major problem understanding the format. Here is what I have so far. It's 3 days of hair pulling and nothing seems to work! Asterisk box 1

Hi all, I have a question: how can I see hints of a remote Asterisk in IAX2 trunk?? I want to set BLF on my phones to look state of other phones also in other Asterisk server. Someone have any idea or solution? I use Asterisk 1.4.24. Thanks all Marco -------------- next part -------------- An HTML attachment was scrubbed... URL:

I am trying to set up an IAX2 trunk between two servers. Server A has the following in iax.conf: [general] ... [ServerB] type=friend trunk=yes host=dynamic secret=myPassword context=myContext Server B has the following in extensions.conf: [outgoing] exten=>_40X,1,Dial,IAX2/ServerB:myPassword@x.x.x.x/${EXTEN} I am using bmtools to monitor the bandwidth usage, and I am not seeing a difference.

hi all, I am trunking via iax2 2 asterisk serverses if both of them have static ip addresses, I can connect them using no password, password or auth rsa with a pair of keys. If one of them has dynamic ip address and need to register on the other server, I can connect them with no password, but I am not able to do that using keys. The question is: which is the right register syntax to use when

Im having problems setting up a trunk between two locations. Heres the setup I have: Server A is connected to the PSTN at my datacenter Server B is connected to a clients e1 line at his datacenter I only want to route calls from Server B to Server A and out through the PSTN. Server A has a lot of other things connecting to it, so I need a very specific context for all calls to go through.

Hi I've two boxes connected over IAX2 trunk before IAX I was using SIP trunk and they were working fine b'coz of bandwidth issue I changed from SIP to IAX now I'm facing a strange problem after some time on the cli of my asterisk box I see lots of messages of IAX2 trunk and b'coz of that my agents are not able to hear any thing and I've restart my * box. Please guide me what I

We use an IAX2 trunk to our remote office and would like for the receptionist to be able to transfer incoming calls from this trunk. but all calls come in as one user, Is there a way to get a breakout on the flash GUI of the incoming calls? Thanks, Justin

Hi, I have installed asterisk-1.8.25.0 on an Ubuntu server which has both an ipv6 ip and ipv4 ip(real ip) assigned. And I have a client ubuntu with only ipv4 ip(local ip) installed asterisk-1.8.25.0 . I want to configure the client asterisk with the server asterisk as IAX2 peer and want to connect to the IPV6 ip. I bind the server with ipv6 and also sending the registration request from the

Ok, I think I am 90%+ there. Note: the configuration or status is the same on both sides unless otherwise noted. I am using RSA keys for authentication and the calls are coming through as authenticated so I'm sure that part works. The peer shows the "(E)" next to the status in Asterisk Info for the IAX2 peers The trunk configuration contains: encryption=yes So here is my

Hi, I have successfully configured an IAX trunk between 2 asterisks, calls can go through both ways without any problems, NAT in the middle of course (iptables) Now , leave them for a while , and make a call from the external server , it doesn't go through, Dial from the internal one, everything works fine again.. Now , it is clearly a problem in the NAT engine,

I have a couple of Asterisk 13.4 servers with an IAX2 trunk between them: [phone1] <--pjsip--> [server1] <--iax2 trunk--> [server2] <--pjsip--> [phone2] With this setup, audio calls work fine, but video doesn't work: I get a black window and if I remember correctly, I was getting white noise in one direction (not sure if the noise thing is asterisk's fault or the

I have call center PCs that switch between an IBEAM SIP softphone and a NEBU IAX softphone (for reasons that aren't germane here). The SIP softphones work fine, but the IAX softphones get a fast busy unless I give them an IAX trunk to use, instead of the PRI trunks that all the other phones are using. I am using Asterisk 1.2.3. svn rev 47264. I've appended a sample call trace. The

Hi - I have 2 Asterisk servers connected using 05 IAX2 trunks. I want to load balance incoming calls over IAX2 trunks. If any trunk goes down the calls traffic will be shared with other available trunks. When it gets Up the script is supposed to perform as desired i.e in load balance mode. Thanks in advance. -------------- next part -------------- An HTML attachment was scrubbed... URL:

IAX2 now has support for a "trunk" mode ("trunk=yes" in the appropriate friend section). Trunk mode allows IAX2 to use bandwidth extremely effectively. The original impetice (and strategy) was a result of a mistake in which it was claimed that Asterisk with a T100P could send 96 simultaneous calls over a single T1 using VoIP. Thanks to a suggestion by the customer, combined

Hi Is anyone successfully using iax2 trunking with CVS head ? The reason I am asking is that I have heard there may be some audio problems, which I would like to know about before sending customer's calls over a iax2 trunked connection. Thanks in advance. Clive

Two cvs-head asterisk boxes with iax2 working fine (without register statements). When two calls are placed simultanously from system A -> B and the packets are sniffed on the wire, I see the two calls using two different udp packets. At the top of iax.conf I have trunk=yes and jitterbuffer=yes (at both ends). I was expecting to see both calls handled within a single udp packet, but