similar to: XEmacs on CentOS 5

Hi! I'm having a problem upgrading an existing 4.4 installation to 5.0. - The machine is a x86_64 architecture - I'm upgrading from a DVD - I've used the same DVD to sucessfully upgrade another machine (therefor I'm pretty sure that it is OK) - The error occurs on both DVD-drives on the machine (therefor I think its not a problem with a particular DVD-drive) I'm

Hi! I'm justing in the process of setting up a new fileserver for our company. I'm installing CentOS 5.3 (64 bit) on it. One of the "problems" with it is that it has a 3.5TB filesystem for the user data which I formatted during setup as an ext3. Now my experience with our current fileserver is that a 0.5TB ext3 filesystem needs approx half an hour to complete (and kicks in

Before I'd try to defragment my whole filesystem (see attached mail for whole story) I figured "Let's try it on some file". So I did > xfs_bmap /raid/Temp/someDiskimage.iso [output shows 101 extents and 1 hole] Then I defragmented the file > xfs_fsr /raid/Temp/someDiskimage.iso extents before:101 after:3 DONE > xfs_bmap /raid/Temp/someDiskimage.iso [output shows 3

Please ignore (and excuse) my previous message - it is incomplete. I'm trying to get R and ESS to work with Xemacs on a newly installed SuSE 9.0 system. Is some setup required beyond installing the rpms? I've installed the Xemacs packages from SuSE xemacs-info-21.4.13-35 xemacs-packages-el-20030629-37 xemacs-21.4.13-35 xemacs-el-21.4.13-35 xemacs-packages-info-20030629-37

I'm trying to get R and ESS to work with Xemacs on a newly installed SuSE 9.0 system. Is some setup required beyond installing the rpms? I've installed the Xemacs packages from SuSE xemacs-info-21.4.13-35 xemacs-packages-el-20030629-37 xemacs-21.4.13-35 xemacs-el-21.4.13-35 xemacs-packages-info-20030629-37 xemacs-packages-20030629-37 ess-5.2.0beta3-1.i586.rpm

Hallo! Trying to configure Xemacs to work with .snw files on windows 2000. Tried to do it how it is described in the FAQ for Sweaves. When starting xemacs with and Snw file *ESS* buffer contains hundrets of lines and the few last ones. (ess-loop-timeout . 500000) (inferior-ess-primary-prompt . ^) (inferior-ess-secondary-prompt . ^) (comint-use-prompt-regexp-instead-of-fields . t)

Probably wrong group for this, but a quick question. I've just switched from emacs to Xemacs. In reinstalling ESS 5.1.19 I keep getting the following error when loading Xemacs: "Error in init file: Symbol's function definition is void: w32-using-nt" I've debugged the ess-site.el file, which is where the error originates from. The line causing the difficulty is:

https://rhn.redhat.com/errata/RHSA-2005-112.html and https://rhn.redhat.com/errata/RHSA-2005-134.html refer Changed files are :- updates/x86_64/RPMS/emacs-21.3-4.1.centos.1.x86_64.rpm updates/x86_64/RPMS/emacs-el-21.3-4.1.centos.1.x86_64.rpm updates/x86_64/RPMS/emacs-leim-21.3-4.1.centos.1.x86_64.rpm updates/x86_64/RPMS/xemacs-21.4.13-8.ent.1.x86_64.rpm

https://rhn.redhat.com/errata/RHSA-2005-112.html and https://rhn.redhat.com/errata/RHSA-2005-134.html refer Changed files are :- updates/i386/RPMS/emacs-21.3-4.1.centos.1.i386.rpm updates/i386/RPMS/emacs-el-21.3-4.1.centos.1.i386.rpm updates/i386/RPMS/emacs-leim-21.3-4.1.centos.1.i386.rpm updates/i386/RPMS/xemacs-21.4.13-8.ent.1.i386.rpm updates/i386/RPMS/xemacs-el-21.4.13-8.ent.1.i386.rpm

I have successfully used XEmacs on my home PC for several months. On 8/25/04 I downloaded R version 1.9.1 (rw1091) from one of the R mirror sites, XEmacs installer (setup.exe) from <http://www.xemacs.org/Download/win32/>, and Jim Fox's latest configuration files (fox-ess-config.zip) from <http://socserv.socsci.mcmaster.ca/jfox/Books/Companion/ESS/> to my Dell laptop, which is

Hi, I use R with XEmacs and ESS, when I'm editing a R file in XEmacs, the delete key work like the Backspace key. This behaviour is only in XEmacs + ESS + R file, it dont have this behaviour on a R section (M+R). Anybody know how to make a delete key to work like the delete key?? ESS 5.1.20-2 XEmacs 21.4.6-8 Thanks for all -- You will always have good luck in your personal affairs. --

Hi there, May I ask the following question. Our Solaris installation of Xemacs and R: SunOS fluke 5.9 Generic_117171-02 sun4u sparc SUNW,Sun-Fire-480R one cannot start R inside xemacs: M-x R "symbol's function definition is void". Also, loading a *.tex file into Xemacs will result in "loading tex mode .. done", but the additional buttons to call TeX related processes

Hi all, I 've just reinstalled from the scratch my Windows 2000 (Italian version) on a formatted HD, because I like to clean the environment from time to time (say once a year). I'm currently using XEmacs-21.4.13 and R (rw1091) and Xemacs is configured as described in http://socserv.socsci.mcmaster.ca/jfox/Books/Companion/ESS/ess-xemacs.pdf The problem is that the command help.start()

running R 2.9.1 on Windows XP. Formerly used Tinn-R but it has been acting strangely lately and I haven't been able to fix it, so I am trying to learn ESS. I have Xemacs 21.4.19. I have ESS configured, I think, as per John Fox: An Introduction to ESS + XEmacs for Windows Users of R John Fox McMaster University Revised: 5 February 2006

Hi, When I start Xemacs version 21.5.28 (in Unix), using the init.el: (setq bell-volume 0) (setq sound-alist nil) (setq grep-find-use-xargs nil) (require 'ess-site) I get the following error: (1) (initialization/error) An error has occurred while loading $home/.xemacs/init.el: Cannot open load file: "ess-site" Backtrace follows: signal(file-error ("Cannot open

> Linux (?) Windows(?) I mean in the Windows environment. > I'm using under linux and the same installation worked for both, emacs and > xemacs. > P.J. I am trying to use on ESS win XEmacs on Windows, but I don't know how to tell XEmacs that use the ESS, I don't found the .emacs file and the system don't let me create such a file. Thank you for your help. Kenneth

In switching to openssh from ssh-1.2.27, I have encountered the following problem with the way openssh handles its XAUTHORITY files separately from ~/.Xauthority. XEmacs has a gnuserv process that runs and allows commands to be issued to a remote XEmacs process. The trouble is when the command is to make a new frame ( window ) on a different X display, it fails because the Xauth cookie is not in

Can anyone help with the following...? I've just downloaded and installed Xemacs (version 21.1.9) for windows and I would like to try and use it for R, so I've also downloaded ESS 5.1.18. I've read the instructions on installation etc... with regards to ESS and followed the steps for using Xemacs on windows 95. i.e. I've included the path to the Rgui executable in my autoexec.bat

I am having some trouble getting reftex, in particular the bibtex related features, to work properly in xemacs when editing text in Sweave files. I have added (defun Rnw-mode () (noweb-mode) (if (fboundp 'R-mode) (setq noweb-default-code-mode 'R-mode))) (add-to-list 'auto-mode-alist '("\\.Rnw\\'" . Rnw-mode)) (add-to-list 'auto-mode-alist

CentOS 5 (Final): where is Xemacs? RH 5 doesn't have Xemacs? Why not? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20080201/299413fb/attachment-0001.html>